Tender For Provn Of Shed At Blooming Buds Play School Store For Lao Office Bldg No. T 191 Brick Wall Partition In Airmen Guard Rest Room At Pocket B Creation Of Dsa With Girll Door Aluminium Partition For Nirala Block No. P 135 Qty 03 Window Grill To
Tender Value
9.20 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
23 days left
EMD
18400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Shed At Blooming Buds Play School Store For Lao Office Bldg No. T 191 Brick Wall Partition In Airmen Guard Rest Room At Pocket B Creation Of Dsa With Girll Door Aluminium Partition For Nirala Block No. P 135 Qty 03 Window Grill To Acs In Afnet Section At Afac Coimbatore
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil. |
| 2 | M&L for cement concrete Type B2 1:2:4 (40mm graded aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified. |
| 3 | S&F for plates Fe 410-W (GdeE- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment, complete all as specified. |
| 4 | S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 |
| 5 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 6 | S & F Plain, galvanised, mild steel sheeting 1 mm thick, in valley gutters (length and girth as fixed) with grade of zinc coating 275 |
| 7 | S & F Rolled sections as in framing like fixed with angle cleats and connecting plates, etc.of Fe-410W(GdeE-250) quality complete all as specified and directed. |
| 8 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 9 | S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed. |
| 10 | S&F 110mm radius PVC (SWR) bends complete all as specified and directed. |
| 11 | Removing excavated soil not exc 50m and depositing where directed at a level not exc 1.50m above the starting point. |
| 12 | M & L for artificial grass- high density realistic grass carpet 35- 40mm thick on floor, made from 100% polypropylene enhanced anti-skid properties for stability designed with double layer backing comes with a one -year warranty |
| 13 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 15 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer on wall all as specified and as directed . |
| 16 | S &F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed. |
| 17 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 18 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 19 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 21 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer on wall all as specified and as directed . |
| 22 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 23 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 24 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall on wall all as specified and as directed . |
| 25 | M & L for Framed work using mild steel having grade of GDE Fe- 410W (Gde E-250) Quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge. |
| 26 | Preparation of new iron and steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 27 | S & F for Powder Coated aluminium frame for partitions with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 28 | S &F Sheet glass, 5.5 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 29 | S & F for 12 mm particle board for insulation purposes, fixed with nails to timber/ aluminum frame work complete all as specified. |
| 30 | S & F for Powder Coated anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 NOs in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 31 | S & F mortice lock,aluminium 4 levers vertical type size 100mm complete all as specified. |
| 32 | S&F 100mm extruded aluminium alloy handles, fabricated type anodised as specified and directed |
| 33 | S&F 150 mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed |
| 34 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 35 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 36 | M&L for applying two coats of cement base paint over primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed. |
| 37 | S& F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16, complete all as specified and directed by engr in charge. |
| 38 | Preparation of new surface of steel and steel based material of any description not otherwise described over 10cm width or girth applying one coat of red oxide zinc chrome and two coat synthetic enamel paint complete all as specified and directed. |
| 39 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed. |
| 41 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall all as specified and as directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender