Tender For Interior Work, Furniture, And Audio Video Work At New Office Food And Drug Commissioner Lucknow (U.P.)
Tender Value
1.45 Crore
Estimated cost
Bid Submission
31 Aug 2026
6 days left
EMD
2.92 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Interior Work, Furniture, And Audio Video Work At New Office Food And Drug Commissioner Lucknow (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Interior work, Furniture, and audio video work at New office food and Drug Commissioner Lucknow (U.P.) |
| 2 | Providing & Fixing of 12 mm thick toughened Glass Door Inluding Door Fiitings Spring & Handle etc. Required Fiitings including Film etc all complete in direction of engineer in charge. |
| 3 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Make Saintgobain/ fenesta/ Veka/ LG) |
| 4 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second Class Teak wood |
| 6 | Providing and fixing teak wood architrave all complete in direction of engineer in charge. |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 8 | Supplying & Laying of 1mm thick Laminate both side of door with glue inlcluding all necessary T&P all complete in direction of architect / Engineer in charge. |
| 9 | Supply & fixing of 5mm HDMR on the Door both sides & pasting 1mm Laminate on it. |
| 10 | Providing & fixing of ISI marked Stainless Steel Finish Mortise Lock |
| 11 | Providing & fixing of ISI marked Stainless Steel Finish Concealed Door Closure |
| 12 | Polishing of the Door Chaukhats & Edges with the Walnut shade, complete with Polyutherane coating sealer |
| 13 | PANELLING |
| 14 | Wooden Partition: Providing and fixing 75 mm thick partition upto false ceiling but frame work upto Ceiling including G.I. Section member 50x50mm full height 600mm C/C including both side 8mm HDMR thick board (make HDMR/Greenply/durian/ century or equivalent) fixed on 600x600 mm G.I. Section grid, member size 50x50 mm, laminate fixed on 5mm HDMR or 5.5mm laminate board with desired polish & ployutherane coats etc all complete including all necessary screw, etc all complete in direction of engineer in charge. (BWP Ply & Laminate : century, greenply/Merino or equivalent make)measurement should be measured upt ceiling height. Etc all complete in direction of engineer in charge. |
| 15 | Providing & Fixing of Wooden Wall Panelling / False Ceiling, 8mm HDMR thick board (make HDMR/Greenply/durian/ century or equivalent) fixed on 600x600 mm G.I. Section grid, member size 50x50 mm, laminate fixed on 5mm HDMR or 5.5mm laminate board with desired polish & ployutherane coats etc all complete including all necessary screw, etc all complete in direction of engineer in charge. |
| 16 | BLINDS |
| 17 | Blinds: Providing & fixing of Rollar Blinds including all necessary Fiitings , T&P all complete in direction of engineer in charge. (Make Macc / Hunterdouglous/Vista/Marvel) |
| 18 | PLUMBING WORKS |
| 19 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 20 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 21 | a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 23 | Semi rigid pipe |
| 24 | 32 mm dia |
| 25 | 40 mm dia |
| 26 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goodthe walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 28 | Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
| 29 | Granite Stone of approved shade |
| 30 | CP Brass fittings |
| 31 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 32 | 45 cm length |
| 33 | 15 mm nominal bore |
| 34 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 35 | a) 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 37 | a) 15 mm nominal bore |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 39 | a) 15 mm nominal bore |
| 40 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 41 | 110mm |
| 42 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) |
| 43 | 100 mm dia |
| 44 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 45 | 110 mm |
| 46 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. |
| 47 | Bend 87.5 degree |
| 48 | 110 mm Bend |
| 49 | Shoe (Plain) |
| 50 | 110 mm Shoe |
| 51 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 53 | Concealed work including cutting chases and making good the walls etc. |
| 54 | 20mm dia nominal outer dia pipes |
| 55 | 25mm dia nominal outer dia pipes |
| 56 | 32mm dia nominal outer dia pipes |
| 57 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 58 | 25mm dia nominal bore |
| 59 | 32mm dia nominal bore |
| 60 | Providing & fixing Towel Rail 300mm Long For Wash Basin Area |
| 61 | Providing & fixing Soap Dispenser with Metallic bottle JAQUAR ACN-CHR-1137N |
| 62 | Providing & fixing Bottle Trap (With Internal Partition) 32mm Size With 250mm & 190mm Long Wall Connection Pipes & Wall Flange JAQUAR ALD-CHR-769 |
| 63 | Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook (for E.W.C.) JAQUAR ALD-CHR-573 |
| 64 | Providing and fixing clean out plug |
| 65 | 110 mm dia. |
| 66 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 67 | Providing & Fixing Vanity Cabinets all complete as per direction of Engineer in charge |
| 68 | Providing & Fixing mirrors on WPC Board all complete as per direction of Engineer in charge |
| 69 | Chair revolving : Geeken BRANDIS 1 High Back Chair, Cushioned Chrome Arm, Chrome Base, Gas Lift, Synchro Knee Tilt, Leatherette Tapestry (Make - Geeken/ Featherlite/ Wipro) |
| 70 | Office Table : Geeken DAWN 1 Office Table, MDF Structure, Veneer with PU PolishOverall Size: 2400 mm X 2100 mm X 750 mm(Make - Geeken/ Featherlite/ Wipro) |
| 71 | Chair revolving : Geeken BRANDIS 2 Medium Back Chair, Cushioned Chrome Arm, Chrome Base, Gas Lift, Synchro Knee Tilt, Leatherette Tapestry (Make - Geeken/ Featherlite/ Wipro) |
| 72 | Chair revolving : Geeken SPIDER 6 Medium Back Chair, PU Adjustable Arm, Gas Lift, Chrome Base, Seat & Back Mesh Tapestry Synchro Tilt (Make - Geeken/ Featherlite/ Wipro) |
| 73 | Ex Chair : Geeken SPIDER 5 High Back Chair, PU Adjustable Arm, Gas Lift, Chrome Base, Seat & Back Mesh Tapestry Synchro Tilt (Make - Geeken/ Featherlite/ Wipro) |
| 74 | Conference Table : Geeken main Conference Table, Particle board and MDF top,Flip-Up Box 8000 x2100 x750 mm with one screen pop up machenism for chairman (Make - Geeken/ Featherlite/ Wipro) |
| 75 | Chair: Geeken GA 535 Medium Back Chair, PP Arm, Gas Lift, Nylon Base, Mesh Back & Seat Leatherette Tapestry Swivel Tilt (Make - Geeken/ Featherlite/ Wipro) |
| 76 | Chair: Geeken GA 535A Visitor Chair, PP Arm, Powder Coated Pipe Frame, Mesh Back & Seat Leatherette Tapestry (Make - Geeken/ Featherlite/ Wipro) |
| 77 | Side Cabinate : Made in Particle board and MDF top,Flip-Up Box 1800 X450 X750 mm (Make - Geeken/ Featherlite/ Wipro) |
| 78 | Workstation Table: Geeken ESSENSE 1 Workstation Table, Panel Based Partition, Particle Board Edge BandedTop (Make - Geeken/ Featherlite/ Wipro) |
| 79 | 3 Seater Sofa: Three Seater Sofa, Wooden Frame, SS Pipe Leg Frame,Sear Back Leatherette Tapestry,Size in mm - 1900(L) X 770(D) X 800(H) (Make - Geeken/ Featherlite/ Wipro) |
| 80 | 1 Seater Sofa: Single Seater Sofa, Wooden Frame, SS Pipe Leg Frame,Sear Back Leatherette Tapestry, (Make - Geeken/ Featherlite/ Wipro) |
| 81 | Providing & Fixing of Single Size bed as per drawing & Design with mattresses (Make Sleepwell/ Springwell/ Coir) with pillow and Pillow Cover & Bed Sheet etc all complete in direction of engineer in charge |
| 82 | Centre Table : Made in SS Pipe Frame, Chrome Finish, Toughened Black Glass Top 12mm Thick, Lower Glass 8mm Thick (Make - Geeken/ Featherlite/ Wipro) |
| 83 | Side Table : Made in SS Pipe Frame, Chrome Finish, Toughened Black Glass Top 12mm Thick, Lower Glass 8mm Thick (Make - Geeken/ Featherlite/ Wipro) |
| 84 | 6 Seater Sofa: Six Seater Sofa, Wooden Frame, SS Pipe Leg Frame,Sear Back Leatherette Tapestry, (Make - Geeken/ Featherlite/ Wipro) |
| 85 | Providing & fixing of Cabinate as per drawing & design, cabinate made in 19mm thick board (make Greenply/durian/ century), 1mm thick laminate fixed on board including hinges (make Hittich/ Dorma/ Ozone) including all necessary T&P all complete in direction of engineer in charge. |
| 86 | High Back Chair : Geeken GS 339 High Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base, Leatherette Tapestry (Make - Geeken/ Featherlite/ Wipro) |
| 87 | Medium Back Chair: Geeken GS 340 Medium Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base, Leatherette Tapestry (Make - Geeken/ Featherlite/ Wipro) |
| 88 | Visitor Chair : Geeken GS341 Visitor Chair, Pipe Frame, PU Chrome Arm, Chrome Plated Pipe Stand, Leatherette Tapestry(Make - Geeken/ Featherlite/ Wipro) |
| 89 | Conference Table : Geeken main Conference Table, Particle board and MDF top,Flip-Up Box with one screen pop up machenism for chairman (Make - Geeken/ Featherlite/ Wipro) |
| 90 | Side Cabinate : Made in Particle board and MDF top,Flip-Up Box 1800 X450 X750 mm (Make - Geeken/ Featherlite/ Wipro) |
| 91 | Workstation Table: Geeken ESSENSE 1 Workstation Table, Panel Based Partition, Particle Board Edge BandedTop (Make - Geeken/ Featherlite/ Wipro) |
| 92 | 2 Seater Sofa: Three Seater Sofa, Wooden Frame, SS Pipe Leg Frame,Sear Back Leatherette Tapestry,Size in mm - 1900(L) X 770(D) X 800(H) (Make - Geeken/ Featherlite/ Wipro) |
| 93 | 1 Seater Sofa: Single Seater Sofa, Wooden Frame, SS Pipe Leg Frame,Sear Back Leatherette Tapestry, (Make - Geeken/ Featherlite/ Wipro) |
| 94 | Centre Table : Made in SS Pipe Frame, Chrome Finish, Toughened Black Glass Top 12mm Thick, Lower Glass 8mm Thick (Make - Geeken/ Featherlite/ Wipro) |
| 95 | Chair revolving : Geeken SPIDER 6 Medium Back Chair, PU Adjustable Arm, Gas Lift, Chrome Base, Seat & Back Mesh Tapestry Synchro Tilt (Make - Geeken/ Featherlite/ Wipro) |
| 96 | Conference Table : Geeken main Conference Table, Particle board and MDF top,Flip-Up Box 8000 x2100 x750 mm with one screen pop up machenism for chairman (Make - Geeken/ Featherlite/ Wipro) |
| 97 | Supplying and placing round canteen table (approx. 900–1000 mm dia) with laminated top and powder coated MS frame complete with 4 polypropylene chairs suitable for office canteen use |
| 98 | AUDIO VIDIO |
| 99 | SITC of Digital delegate Unit. Digital delegate unit should have possible- to-speak indicator with plug and play functionality for ensuring fast installation and reconfiguration times, compact. attractive erconomic design with easily configured as a participant device or chairpersons device and having and immunity to mobile phone interferance. Providing functions like possible to speak indication, request to speak indication and GSM immunity with frequency response 200 Hz to 12.5 kHz, headphones load impedance > 32 ohms <1K ohm and loudspeaker nominal output 72 dB SPL. 1) Units should be configurable as a participant or chairperson's device: changeable microphone buttons and concealed slide switch at the bottom of the device for configuration purposes. any unit can be configured as chairman or delegate unit. 2) We need colour coded LED indicator above microphone buttons for showing the status of the device:- A] White ('Possible to Speak') shall indicate that the microphone will be active immediately after pressing the microphone button. B] Green shall indicate that the participant has pressed the microphone button and the request to speak has been added to the waiting list. C] Green flashing shall indicate that the participant is first in the waiting list, i.e, next in line to speak. 3] Colour- coded light-ring indicator in head of microphone: green shall indicate that a request to speak has been added to the waiting list; green flashing.(Make Bosch/ JBL/ Crammer) |
| 100 | SITC of Digital delegate Unit. Digital delegate unit should have possible- to-speak indicator with plug and play functionality for ensuring fast installation and reconfiguration times, compact. attractive erconomic design with easily configured as a participant device or chairpersons device and having and immunity to mobile phone interferance. A Special priority button for chairman. Providing functions like possible to speak indication, request to speak indication and GSM immunity with frequency response 200 Hz to 12.5 kHz, headphones load impedance > 32 ohms <1K ohm and loudspeaker nominal output 72 dB SPL. (Make Bosch/ JBL/ Crammer) |
| 101 | SITC OF DIGITAL CONTROLLER. Unit should be suitable for controlling single and multiple delegate / chairman units in the hall / dias as required), all power supply equipment to provide power to the delegates, chairman, should be installed in the control room itself. Central controller unit cum power supply having four operational microphone modes (Open Override, Voice Activated and push to talk (PTT) Mode) selection of number of microphone (1-4) this can be further extended to10 microphones in the web browser conference controller unit itself should be suitable for controlling more than 75 wired delegate units Touch button control allows for easy configuration and operation of the unit, while intultive LED indicators give a clear indication of the system settings. Unit is with built in digital feedbak suppression & has 8 hours of internal recording facility. Unit is with USB Facility and a 128 GB stick can record upto 4000 Hours of conference. Unit should have built in loudspeaker & head phone socket for monitoring. (Make Bosch/ JBL/ Crammer) |
| 102 | SITC of 10 Channel mixer Bosch Dynacord latest state of art mixer equipped with voice filter, feedback filter controlling from 80 Hz to 7700 Hz, 2 x 7 band graphic providing complete freq. control on both the channels, 2 nos 24/ 48 bit digital effects for crisp reproduction. Bosch Dynacord(Make Bosch/ JBL/ Crammer) |
| 103 | SITC of wireless microphone Bosch EV make cordless collar or hand held microphone working on UHF frequency with smart battery feature, Unit has other features like one touch auto clean scan. Programmable in 25KHz steps across 28 MHz operating bandwidth backlit LCD displays the group, channel operation, transmitter battery level, diversity operation, RF & audio signal level, detachable 1/4 Wave antennas, Freq 50 to 15000 Hz, S/N Ratio > 100 dB Dynamic range >100 dB. PLL Synthesized, No of Channels 1112 programmable in steps of 25 KHz, image rejection > 60 dB, Modulation +/- 40 KHz. RE series Bosch EV. (Make Bosch/ JBL/ Crammer) |
| 104 | SITC of Bosch wall mounted 30 Watt Speakers with selectable 8 Ohms, 70 & 100 Volts taps premium cabinet in ABS Body, SAFE tested as per IEC- 268.5 selectable transformer taps for getting full, Half, quarter power or 8 power radiation, max power 45 Watt. SPL @ rated power 105dB effective freq 100 to 18500 Hz. Opening angle 160 to 81 degree horizontal & 150 to 90 degrees vertical. Unit Wt 2.4 Kg & performance as per IEC 60268.5 Unit is with adjustable mounting bracket.(Make Bosch/ JBL/ Crammer) |
| 105 | SITC of Bosch 180 Watts mixing amplifier having 4 mlke inputs with independent volume control, unit is with USB drive and SD card for MP3 play back, the digitally controlled FM tuner uses a frequency synthesizer for accurate capture of radio stations and has five presets to store favorite radio station frequency 80 Hz to 18000KHz, Distortion <1 % @ rated power front panel; has power on switch With LED, LED VU meter for master output, back panel has 4 input & 1 Aux input, DIP switches, loudspeaker output 100, 70 Volts & 4 Ohms. S/N ratio > 65 dB at rated power. (Make Bosch/ JBL/ Crammer) |
| 106 | Supply and Laying of Suitable connection cable proper completion of work as per direction of EIC. Ls |
| 107 | 98\\" intractive panel 4K Ultra HD Smart Display – Experience stunning visuals with high-definition clarity .The zero bonding technology ensures a smooth, paper-like writing experience. |
| 108 | HDMICable15Mtr |
| 109 | ProjectorMount |
| 110 | SITC of professional PA rack to mount amplifiers, CCU and other control items with front acrylic cover, fan cooled and with Wheels. Coustom Built |
| 111 | Conference digital cable & connectors |
| 112 | GST Extra as applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender