Tender For Construction Of New Calciner Building, Working Platform And Electrical Works
Tender Value
4.50 Crore
Estimated cost
Bid Submission
14 Sep 2026
22 days left
EMD
7.63 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Calciner Building, Working Platform And Electrical Works
BOQ
| Sl. No. | Item Description |
| 1 | Submission of design basis report with detailed load calculation, foundation, beam, slab, column detailed reinforcement details etc. Details as per Sl No 1 in BOQ |
| 2 | Site clearance for the proposed new development area and clearing of existing baby metal materials from the site & kept to the location specified etc. Details as per Sl No 2 in BOQ |
| 3 | Dismantling of concrete, masonry/brick wall, floor, foundation, rubble stones, road etc.Details as per Sl No 3 in BOQ |
| 4 | Earthwork excavation by mechanical means & as directed,etc. Details as per Sl No 4 in BOQ |
| 5 | Providing and laying GSB 200mm thick (approx.) over the existing surface as directed by EIC for foundation, floor etc.Details as per Sl No 5 in BOQ |
| 6 | SSupplying, filling, laying & levelling gravelly red earth of good quality as approved, etc. Details as per Sl No 6 in BOQ |
| 7 | Shifting, filling, Laying & Levelling of concrete/brick debris / red earth from nearby location to proposed work site by engaging suitable etc. Details as per Sl No 7 in BOQ |
| 8 | Providing and laying in position plain cement concrete mix 1:3:6 (1 cement, 3 coarse sand and 6 graded broken stone aggregate 20 & 12 mm nominal size) after ramming of existing earth, etc. Details as per Sl No 8 in BOQ |
| 9 | Providing & laying of Reinforced Cement Concrete for foundation, footings, columns, beams, slabs, floors etc. Details as per Sl No 9 in BOQ |
| 10 | Supply & Laying reinforcement High yield strength deformed bars Fe 500 grade, cutting to required size, etc. Details as per Sl No 10 in BOQ |
| 11 | FOOTING, COLUMNS, TIE BEAM, PLINTH BEAMProviding, centering & shuttering of approved quality for all RCC works etc.Details as per Sl No 11 in BOQ |
| 12 | ROOF SLAB, ROOF BEAM, STAIRCASE, SUNSHADES Providing, centering & shuttering of approved quality for all RCC works etc. Details as per Sl No 12 in BOQ |
| 13 | Providing masonry work in using Autoclaved Aerated Concrete (AAC) block of required size, etc. Details as per Sl No 13 in BOQ |
| 14 | Providing Plastering in CM 1:4, 12 mm thick average in masonry structure by application rough coat first, etc. Details as per Sl No 14 in BOQ |
| 15 | Providing and applying paint on the exterior surfaces of the proposed locations as directed by the Engineer-in-Charge (EIC), etc.Details as per Sl No 15 in BOQ |
| 16 | Supply and applying paint on the interior surfaces of the proposed locations as directed by the Engineer-in-Charge (EIC), Details as per Sl No 16 in BOQ |
| 17 | Fabrication, supply & fixing of powder coated Aluminium sliding/casement window of outer frame size 60mm x 50mm (approx), thickness 1.6mm or nearest etc. Details as per Sl No 17 in BOQ |
| 18 | Providing and finishing concrete floor surface using mechanical power trowel finish (power trowel or ride-on trowel machine) to achieve a smooth, hard, and level finish. Details as per Sl No 18 in BOQ |
| 19 | Supply, fabrication & erection of MS structural supports such as purlins, wind bracing, sag rod, supporting cleats, stiffeners, battens, gusset plates, joint plates and other supports etc. Details as per Sl No 19 in BOQ |
| 20 | Supplying, providing, laying and fixing of industrial profile PVC roof sheet 1.9mm thick white colour, etc. Details as per Sl No 20 in BOQ |
| 21 | Supply and installation of UPVC gutter of size of about 320X250mm of length 3m each etc . Details as per Sl No 21 in BOQ |
| 22 | Supply & fixing PVC pipe of 140mm dia or nearest, 4 kg/cm2 pressure rating for rain water down take from roof gutter, Details as per Sl No 22 in BOQ |
| 23 | Supply and fixing 600 mm diameter powder-coated aluminium wind-driven turbo roof extractor, Details as per Sl No 23 in BOQ |
| 24 | Providing heavy duty PU screed lining, 5mm average thick, over the existing concrete floor area as per the scope of work etc.Details as per Sl No 24 in BOQ |
| 25 | Supply and fixing pre coloured white solid rolling shutter (0.90mm thick) strips with side guides (2mm GI) brackets & bottom plate (2mm GI),. Details as per Sl No 25 in BOQ |
| 26 | Supply, cutting and fixing of PVC foam board 9mm thick for cabins, partitions etc., Details as per Sl No 26 in BOQ |
| 27 | Anchoring of new re-bars in the RCC columns, beams & slab wherever required by using pure epoxy resin anchoring mortar. Details as per Sl No 27 in BOQ |
| 28 | Engaging a core cutting machine for making holes of 25 mm to 200 mm diameter cores using a diamond core cutter machine to a depth of 300 to 500mm for walls. Details as per Sl No 28 in BOQ |
| 29 | Providing & fixing good quality vitrified tiles of 600mmx600mm or 600mmx1200mm. Details as per Sl No 29 in BOQ |
| 30 | Supply & fixing powder coated aluminium ventilator using section size of 50mm x 25mm approx. Details as per Sl No 30 in BOQ |
| 31 | Providing & laying lean concrete for handrails to a height of 1m from step using 6mm metal granite. Details as per Sl No 31 in BOQ |
| 32 | Fabrication, supply & fixing powder coated aluminium door partially glazed, Details as per Sl No 32 in BOQ |
| 33 | Supply, Fabrication, Erection and Painting of MS structures for working platform and platform supports with handrails, Details as per Sl No 33 in BOQ |
| 34 | Supply, Cutting and fixing of wooden Chequered boards of required size and shape of 18mm thickness on MS frames as part of providing working.Details as per Sl No 34 in BOQ |
| 35 | Supply, Installation and Commissioning of Electric Hoist on the Monorail.Details as per Sl No 35 in BOQ |
| 36 | MSB LT Panels: Incomer: (1) 100A, TPN, 50kA, MCCB with necessary metering and indication accessories for solar . Etc. Details as per Sl No 36 in BOQ |
| 37 | Lighting Panel:Incomer: 400A, TPN, 50kA, MCCB with necessary metering and indication accessories – 1 Nos. etc. Details as per Sl No 37 in BOQ |
| 38 | Supply of 12 Way PDB with 100A RCCB and 100A MCB as incomer and 32 A MCBs as outgoing, Details as per Sl No 38 in BOQ |
| 39 | Supply of 12 Way LDB metal door type, with 32A, 2P RCCB and 32A, 2P MCB as incomer and 6 A MCBs as outgoing, Details as per Sl No 39 in BOQ |
| 40 | Supply of 100A, 4P, 30mA RCCB,Details as per Sl No 40 in BOQ. |
| 41 | Supply of 100A, 4P, ‘C’ curve MCB, Details as per Sl No 41 in BOQ |
| 42 | Supply of 32A, 3P, ‘C’ curve MCB , Details as per Sl No 42 in BOQ |
| 43 | Supply of 32A, 2P, 30mA RCCB , Details as per Sl No 43 in BOQ |
| 44 | Supply of 32A, 2P, ‘C’ curve MCB, Details as per Sl No 44 in BOQ |
| 45 | Supply of 6A, 1P, ‘C’ curve MCB, Details as per Sl No 45 in BOQ |
| 46 | Supply of 3.5C x 400 Sq.mm Al conductor XLPE Armoured Cable, Details as per Sl No 46 in BOQ |
| 47 | Supply of 4C x 16 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 47 in BOQ |
| 48 | Supply of 4C x 6 Sq.mm Cu conductor XLPE Armoured Cable,Details as per Sl No 48 in BOQ |
| 49 | Supply of 4C x 1.5 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 49 in BOQ |
| 50 | Supply of Single compression cable gland suitable for 3.5C x 400 Sq.mm Al conductor XLPE Armoured Cable, Details as per Sl No 50 in BOQ |
| 51 | Supply of Single compression cable gland suitable for 4C x 16 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 51 in BOQ |
| 52 | Supply of Single compression cable gland suitable for 4C x 6 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 52 in BOQ |
| 53 | Supply of Single compression cable gland suitable for 4C x 1.5 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 53 in BOQ |
| 54 | Supply of Al crimping socket (400 Sq.mm) Details as per Sl No 54 in BOQ |
| 55 | Supply of Al crimping socket (185 Sq.mm) Details as per Sl No 55 in BOQ |
| 56 | Supply of Cu crimping socket (16 Sq.mm) Details as per Sl No 56 in BOQ |
| 57 | Supply of Cu crimping socket (6 Sq.mm) Details as per Sl No 57 in BOQ |
| 58 | Supply of Cu crimping socket (1.5 Sq.mm) Details as per Sl No 58 in BOQ |
| 59 | Supply of earth strip 25 x 3mm, Details as per Sl No 59 in BOQ |
| 60 | Supply of insulated copper wire 1.5 Sq. mm, Details as per Sl No 60 in BOQ |
| 61 | Supply of LED lights. (as per annexure-4).Details as per Sl No 61 in BOQ |
| 62 | Supply of M S Flat 40 x 6 mm.Details as per Sl No 62 in BOQ |
| 63 | Supply of M S Angle 40 x 40 x 6 mm.Details as per Sl No 63 in BOQ |
| 64 | Supply of 30 mm heavy duty MS Pipe.Details as per Sl No 64 in BOQ |
| 65 | Supply of 90 x 90 mm anticorrosive PVC junction Box, Details as per Sl No 65 in BOQ |
| 66 | Supply of Industrial Plug & Socket, Details as per Sl No 66 in BOQ |
| 67 | Isolation, Disconnection of existing power cable connection from the MSB LT panel/switch gears without disturbing the cable sockets and glands and sockets of the removed cable, Details as per Sl No 67 in BOQ |
| 68 | Dismantling, removing and shifting of existing obsolete MSB LT panels to scrape yard. Details as per Sl No 68 in BOQ |
| 69 | Erection/Installation, providing power cable connection and Commissioning, Details as per Sl No 69 in BOQ |
| 70 | Erection/Installation, providing power cable connection and Commissioning of Rittal/BCH make Lighting panel having size : 2275 mm (H) x 2400 mm (W) x 500 mm (D). Details as per Sl No 66 in BOQ |
| 71 | Installation and commissioning of 12 Way PDB with 100A RCCB and 100A MCB as incomer and 32 A MCBs as outgoing. Details as per Sl No 71 in BOQ |
| 72 | Installation and commissioning of 12 Way LDB with 32A, 2P CCB and 32A, 2P MCB as incomer and 6 A MCBs as outgoing. Details as per Sl No 72 in BOQ |
| 73 | Fabrication of cable tray, cable tray supports, light fixing upports, exhaust fan fixing supports, DB fixing frames etc. Details as per Sl No 73 in BOQ |
| 74 | Surface preparation and painting of cable tray supports, Details as per Sl No 74 in BOQ |
| 75 | Laying and dressing of 3.5C x 400 Sq.mm Al conductor Armoured Cable.Details as per Sl No 75 in BOQ |
| 76 | Laying and dressing of 4C x 16 Sq.mm Cu conductor Armoured Cable. Details as per Sl No 76 in BOQ |
| 77 | Laying and dressing of 4C x 6 Sq.mm Cu conductor Armoured Cable.Details as per Sl No 77 in BOQ |
| 78 | Laying and dressing of 4C x 1.5 Sq.mm Cu conductor Armoured Cable. Details as per Sl No 78 in BOQ |
| 79 | Termination of 3.5C x 400 Sq.mm Al conductor XLPE Armoured Cable. Details as per Sl No 79 in BOQ |
| 80 | Termination of 4C x 16 Sq.mm Cu conductor XLPE Armoured Cable, Details as per Sl No 80 in BOQ |
| 81 | Termination of 4C x 6 Sq.mm Cu conductor XLPE Armoured Cable. Details as per Sl No 81 in BOQ |
| 82 | Termination of 4C x 1.5 Sq.mm Cu conductor XLPE Armoured Cable. Details as per Sl No 82 in BOQ |
| 83 | Installation and charging of LED light points. Details as per Sl No 83 in BOQ |
| 84 | Fixing and installation of Installation 90 x 90 mm anticorrosive PVC junction Box. Details as per Sl No 84 in BOQ |
| 85 | Laying and termination 25 x 3 mm earth copper strip. Details as per Sl No 85 in BOQ |
| 86 | Laying and termination 1.5 Sq. mm earth copper wire.Details as per Sl No 86 in BOQ |
| 87 | Fixing, installation and commissioning of Industrial Plug & Socket. Details as per Sl No 87 in BOQ |
| 88 | Miscellaneous electrical/mechanical/civil works related to PART C of price schedule/electrical work. Details as per Sl No 88 in BOQ Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender