Tender For Repair To Joinery, Aluminum Doors/Ventilators ,Steel Windows/ Ventilators, Cup Board, Rolling Shutter, Steel Doors, Pvc Doors, Wooden Doors & Windows In Certain Otm Accn At Cme Under Ge Cme Khadki (8740/E8)
Tender Value
50 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
22 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Aluminum Doors/Ventilators ,Steel Windows/ Ventilators, Cup Board, Rolling Shutter, Steel Doors, Pvc Doors, Wooden Doors & Windows In Certain Otm Accn At Cme Under Ge Cme Khadki (8740/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and directed by Eng-in-charge. |
| 2 | Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and directed by Eng-in-charge. |
| 3 | Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and directed by Eng-in-charge. |
| 4 | S&F 2nd class hard wood plain solid straight Chowkats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints etc. complete all as specified and directed by Eng-in-charge. |
| 5 | M&L preparing surfaces of wood and wood based and treating ends of posts, back of Chowkats. Etc area exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed by Eng-in-charge. |
| 6 | S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to Chowkats . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed by Eng-in-charge. |
| 7 | S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Eng-in-charge. |
| 8 | S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Eng-in-charge. |
| 9 | Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed by Eng-in-charge. |
| 10 | M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Eng-in-charge. |
| 11 | Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed by Eng-in-charge. |
| 12 | S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc complete all as specified and directed by Eng-in-charge. |
| 13 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawings, complete all as specified and directed by Eng-in-charge. |
| 14 | M&L for Preparing New Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and directed by Eng-in-charge. |
| 15 | M&L for Preparing old Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying one Coats of Synthetic Enamel Paint (First quality) complete all as specified and directed by Eng-in-charge. |
| 16 | M&L preparing old Steel and Iron Surfaces of any descriptions, over 10cm in width or girth and applying one Coats of Synthetic Enamel Paint , complete all as specified and directed by Eng-in-charge. |
| 17 | S & F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Eng-in-charge. |
| 18 | S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and directed by Eng-in-charge. |
| 19 | M&L barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed by Eng-in-charge. |
| 20 | S & F 150 mm Aluminium handles, cast type anodised complete all as specified and directed by Eng-in-charge. |
| 21 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Eng-in-charge. |
| 22 | S&F 300mm long Aluminium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Eng-in-charge. |
| 23 | S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Eng-in-charge. |
| 24 | S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, fixing etc, complete all as specified and directed by Eng-in-charge. |
| 25 | S&F in repairs stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, fixing and repair etc, complete all as specified and directed by Eng-in-charge. |
| 26 | S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Eng-in-charge. |
| 27 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Eng-in-charge. |
| 28 | S&F 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Eng-in-charge. |
| 29 | S&F in 3mm thick sheet glass n.exe 0.50 sqm each ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Eng-in-charge. |
| 30 | S&F in repairs 3mm thick sheet glass n.exe 0.50 sqm each ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm each pane complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repairs aluminium colour powder coated anodised partition leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anodised partition frame section 101.60x44.45x1.93 mm fixed as per specified (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per specified. (h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 4 mm thick Make : Saint goblin mudguardNote : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge. |
| 33 | S&F in repairs aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per specified (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per specified. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per specified. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as specified. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002.Make-Jindal (f) Floor spring Make-Sandhu,(g) Six lever mortise lock brass Make : Godrej/Classic on in each door(h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 4 mm thick Make : Saint gobain mudguard(k) Floor springNote : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge. |
| 34 | S & F in repairs powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted Modi guard and one shutter with stainless steel wire gauge wire cloth 0.36 mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete including taking down old window of any size. Note Size of aluminium sections are as under :-(i) Three track top & vertical – Jindal main – 2010 Section No 20621.(ii) Three track bottom - Jindal main – 2010 Section No 20620.(iii) Shutter vertical section - Jindal main – 2010 Section No 20606.(iv) Shutter top & bottom - Jindal main – 2010 Section No 20604(v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605. |
| 35 | S&F in repairs Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 4 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc including taking down old ventilator etc. complete all as specified and directed by Eng-in-charge. |
| 36 | S&F in repair 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed by Eng-in-charge. |
| 37 | M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed by Eng-in-charge. |
| 38 | M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed by Eng-in-charge. |
| 39 | M&L preparing surfaces of wood and wood based materials treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed by Eng-in-charge. |
| 40 | Resecuring or easing & adjusting , without taking down of shutter in the same opening of any description and size complete all as specified and directed by Eng-in-charge. |
| 41 | M&L for 2nd class hardwood for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & n. exc 25 sq. cm second class H/W complete all as specified and directed by Eng-in-charge. |
| 42 | M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed by Eng-in-charge. |
| 43 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and directed by Eng-in-charge. |
| 44 | S&F in repairs 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed by Eng-in-charge. |
| 45 | S&F 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed by Eng-in-charge. |
| 46 | S&F 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed by Eng-in-charge. |
| 47 | S&F in repairs 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed by Eng-in-charge. |
| 48 | Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Eng-in-charge. |
| 49 | M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work complete all as specified and directed by Eng-in-charge. |
| 50 | S&F in repair steel rolling shutters, lath with 1.25mm out b all bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, etc. gear operated type with bevel gear box and crank handle and fixing of safety lever locks mild steel with 4 levers for rolling shutter and ball bearing for rolling shutters etc complete all as specified and directed by Eng-in-charge. |
| 51 | Supply only safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed by Eng-in-charge. |
| 52 | Supply ball bearing for rolling shutters complete all as specified and directed by Eng-in-charge. |
| 53 | M&L Welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed by Eng-in-charge. |
| 54 | S&F fixed in repairs aluminium sheet 0.56 mm fixed to door shutters with nails complete all as specified and directed by Eng-in-charge. |
| 55 | S&F in repairs curtain rods, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Eng-in-charge. |
| 56 | S&F in repairs brackets for curtain rod complete all as specified and directed by Eng-in-charge. |
| 57 | Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed by Eng-in-charge. |
| 58 | M&L for pre-cast PCC block masonary type C-1, 1:3:6 exc 10 cm width and set in CM 1:6 complete all as specified and directed by Eng-in-charge. |
| 59 | M&L walling random rubble uncoursed , well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed by Eng-in-charge. |
| 60 | All as per item No 59 above but except stone complete all as specified and directed by Eng-in-charge. |
| 61 | M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed by Eng-in-charge. |
| 62 | M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed by Eng-in-charge. |
| 63 | M&L for repair of aluminium doors and ventilators glasses (fixed with rubber mold or as as required), wiremesh (fixed with screws or as required), and frames complete all as specified and directed by Eng-in-charge. |
| 64 | M&L for repair/replacement of handles, tower bolt, locks of aluminium doors(floor or normal door lock) complete all as specified and directed by Eng-in-charge. |
| 65 | M&L in repair/replacement of floor door spring of aluminium doors complete all as specified and directed by Eng-in-charge. |
| 66 | M&L in repair/replacement of hydraulic door closure of aluminium doors complete all as specified and directed by Eng-in-charge. |
| 67 | S&F for Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded including MS sheet covering 1 mm thick complete all as specified and directed by Eng-in-charge. |
| 68 | S&F for 12mm thick toughened glass(frosted or transparent), 300mm handles, hydraulic floor spring, floor lock along with all suitable fitting for 12mm thick toughened glass door(hinges, clips, bracket etc) complete all as specified and directed by Eng-in-charge. |
| 69 | M & L for scraping the old polish surfaces of wooden by removing stains/spots with sand papers filling the holes/cracks, cavities with wood filler and french polishing with two coats of teak wood colour or as approved by the Engineer-in-Charge of melamine polish complete all as specified and directed by Eng-in-charge. |
| 70 | S&F in repairs 3mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with Self Taping screw and washer in wall etc along with 40mm x 3mm flat strips and all necessary fittings to keep the sheet in place including taking down existing sheets complete all as specified and directed by Eng-in-charge.Note :1. The colour of the sheet will be as per Accepting Officer/Engr-in-Charge.2. The rate of the item includes all necessary fittings, no item shall be paid separately. |
| 71 | Taking down and Refixing of Aluminium Door/Windows/Partition at same or different position of any size and description complete all specified and directed by Engr in Charge |
| 72 | (Applicable for above all items)(a) Contractor has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office.(b) Labour should wear contractors uniform with firm logo, failing which recovery should be made.(c) Minimum of 02 x teams of each trades shall be available for main of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site.(d) Site clearance shall be done by contractor after finishing work.(e) All Scarps will be done with mechanical scaper(f) Mechanical scalper should be deposit in our store at the time of sample approval(g) Height of the work will be upto 15m or less Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender