Tender For Special Repair To Bldg No Np-17, Np-23 & Np-40 In 87 Mtn Bde Under Age B/R-1 At Ge(South) Udh Ur
Tender Value
48.18 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Np-17, Np-23 & Np-40 In 87 Mtn Bde Under Age B/R-1 At Ge(South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIR TO BLDG NO NP-17, NP-23 & NP-40 IN 87 MTN BDE UNDER AGE B/R-1 AT GE(SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-95/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed by Engr-in-charge |
| 3 | Taking down chowkat or frame with shutters n.exe 1.50 sqm (without taking off shutter from frame) each all as specified and directed by Engr-in-charge |
| 4 | Taking down chowka tor frame with shutters.exe 1.50 sqm and n exe 4 sqm (without taking off shutter from the frame) each all as specified and directed by Engr-in-charge |
| 5 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises all as specified and directed by Engr-in-charge |
| 6 | Dismantling of plain or corrugated steel sheeting any gauge and thickness including Nainiital or similar pattern roof coveriongs complete all as specified and directed by Engr-in-charge |
| 7 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge |
| 8 | Demolition of brick work built in cement mortar all as specified and directed by Engr-in-charge |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL all as specified and directed by Engr-in-charge |
| 10 | Demolition of reinforced cement conrete (reinforcement cut as required to facilitate demoletion) of roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work complete all as specified and directed by Engr-in-charge |
| 11 | Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard and dence soil and getting out complete all as specified and directed by Engr In Charge. |
| 12 | Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed by Engr-in-charge |
| 13 | Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-charge |
| 14 | Removing of cement mortar frome bricks and cleaning bricks, stacking for measurement includinhg all extra handling and removal and disposing off rubbish all as specified and directed by Engr-in-charge |
| 15 | Removing of cement mortar 1:4 from in half brick thick and cleaning bricks, stacking for measurement ncluding all extra handling and removal and disposing off rubbish complete all as specified and directed by Engr-in-charge |
| 16 | Taking up or down, steel tubing 15mm bore, and connection, in cluding cleaning complete all as specified and directed by Engr-in-charge |
| 17 | Taking up or down, steel tubing 20mm bore, and connection, in cluding cleaning complete all as specified and directed by Engr-in-charge |
| 18 | Re-fixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc,.) all as specified and directed by Engr-in-charge |
| 19 | Re-fixing old steel tubing 20mm and connections in new or old position (walls, ceiling, floors etc,.) all as specified and directed by Engr-in-charge |
| 20 | M & L for brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed by Engr-in-charge |
| 21 | M & L for brick with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed by Engr-in-charge |
| 22 | M&L (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintel over 1.5m span etc all as specified and directed by Engr-in-charge |
| 23 | M&L for precast cement concrete 1:2:4 type B-I using 20 mm graded stone aggregate as in Roof & cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and directed by Engr-in-charge |
| 24 | Use and waste of formwork to soffits of floor or roof beams, beam haunching, grider, bressumber, lintels, cantilever, sleves including supports, over hang etc also splay between floor and beams to rough finish surface of concrete flat. all as specified and directed by Engr-in-charge |
| 25 | M&L mild steel TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-charge |
| 26 | M&L mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire and including 10mm dia in stirrups, spacers and binders(annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-charge |
| 27 | M & L Providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring all as specified and directed by Engr-in-charge |
| 28 | M&L 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even all as specified and directed by Engr-in-charge |
| 29 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving all as specified and directed by Engr-in-charge |
| 30 | M & L Non skid ceramic tiles (dark shade) 7-8 mm thick (Square/rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified over 15 mm thick screed bed or bedding layer in cement mortar 1:4 all as specified and directed by Engr-in-charge |
| 31 | M & L for non skid coloured digital tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 20mm thick cement screed bed of CM (1:6) complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for glazed ceramic digital tiles 450x350x7mm / 300X600X7 MM thick coloured/printed in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade as in skirting/dado over and including 15mm thick cement screed bed (rendering) in CM (1:4) complete all as specified and directed by Engr-in-charge |
| 33 | Rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed by Engr-in-charge |
| 34 | Rendering 15 mm thick cement plaster in two coats on external surfaces of brick work in CM 1:4 and second coat to be applied with WPC and recrone polyster fibre including fair finishing (WPC will be measured and paid separately) all as specified and directed by Engr-in-charge |
| 35 | Supply only liquid water proofing compound all as specified and directed by Engr-in-charge |
| 36 | M & L for preparation of new decorated distempered surfaces of walls and apply two coat of oil emulsion distemper to walls including 2 mm wall putty complete all as specified and directed by Engr-in-charge |
| 37 | M & L for 3mm thick wall care putty on wall surfaces complete all as specified and directed by Engr-in-charge |
| 38 | Material and labour for applying two coats of exterior acrylic emulsion (Weather Coat-antifungal) paint including preparation by mechanical means (Spray gun) including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots and over a coat of exterior primer on plastered/unplastered(tiles) surfaces complete all as specified ans directed by Engr-in-Charge (Tint and shade as approved by the GE) |
| 39 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made. |
| 40 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, with both the faces covered with decorative face venner with lipping/ frame to match all as specified and directed by Engr-in-charge |
| 41 | S&F for Powder Coating anodised aluminum frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed by Engr-in-charge |
| 42 | S&F for Powder Coating anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg /m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed by Engr-in-charge |
| 43 | S&F in repair 150 mm long aluminium handles, cast type anodised, complete all as specified and directed by Engr-in-charge |
| 44 | S&F Butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pins, anodised and fixed, type B-21 complete all as specified and directed by Engr-in-charge |
| 45 | S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge |
| 46 | S&F aluminium grill of mesh size 50 mm x 50 mm fixed to aluminum window frame complete all as specified and directed by Engr-in-charge |
| 47 | S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and directed by Engr-in-charge |
| 48 | M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed by Engr-in-charge |
| 49 | S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed by Engr-in-charge |
| 50 | S & F MS Steel work in tubular trusses post rafter and purlin including tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed by Engr-in-charge |
| 51 | M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer. all as specified and directed by Engr-in-charge |
| 52 | S&F in repair 150 mm long aluminium handles, cast type anodised, complete all as specified and directed by Engr-in-charge |
| 53 | S&F in repair Butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pins, anodised and fixed, type B-21 complete all as specified and directed by Engr-in-charge |
| 54 | S/F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet rainforced with MS square tabe fixed in opening all as specified and directed by Engr-in-charge. |
| 55 | S&F Factory with partical board core Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as specified and directed by Engr-in-charge |
| 56 | S&F for 300 mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge |
| 57 | S&F for 150 mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge |
| 58 | Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix galvanized steel tubing, medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and directed by Engr-in-charge |
| 60 | Supply and fix galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to laid in trenches all as specified and directed by Engr-in-charge |
| 61 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth. |
| 62 | S&F brass CP WALL & WHB mixture unit 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-charge |
| 63 | S&F 15 mm dia angle valve fancy type chromium plated cast copper alloy high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed by Engr-in-charge |
| 64 | S&F as in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed by Engr-in-charge |
| 65 | S&F PVC connection 15mm size PTMT nuts of length450mm all as specified and directed by Engr-in-charge |
| 66 | S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) all as specified and directed by Engr-in-charge |
| 67 | S&F as in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges all as specified and directed by Engr-in-charge |
| 68 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long all as specified and directed by Engr-in-charge |
| 69 | S&F in repairs toilet paper holder stainless steel chromium plated rod size 75 mm complete all as specified and directed by Engr-in-charge |
| 70 | Disconnecting existing tanks of capacity exc. 250 & n exc. 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position all as specified and directed by Engr-in-charge |
| 71 | S&F 500 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-charge |
| 72 | Supply and fix for 110mm dia PVC (SWR) pipes double socketed in any length with rubbing ring joints fixed to walls complete all as specified and directed by Engr-in-charge |
| 73 | Supply and fixing of 110mm dia PVC (SWR) bends for any radius complete all as specified and directed by Engr-in-charge |
| 74 | Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-in-charge |
| 75 | S & F in repair 110 mm bore PVC (SWR), junction double, (single T), equal or unequal with access door all as specified and directed by Engr-in-charge |
| 76 | S&F 110mm PVC (SWR) branch piece, single Y piece equal or unequal. all as specified and directed by Engr-in-charge |
| 77 | S&F soap dish CP brass complete all as specified and directed by Engr-in-charge |
| 78 | S & F in rep Vitreous China wash basin with padastal white, flat back, size 550x400 including taps, but fixing 15mm size CP pillar tap, 32mm dia PVC waste coupling, fixing over existing brackets but exclusive of fixing of supply and waste pipe all as specified and directed by Engr-in-charge |
| 79 | S&F in repairs drapery rod of 25mm dia stainless steel 304 grade along with brackets and end caps of quality all as specified and directed by Engr-in-charge and approved by GE |
| 80 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.5 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed by Engr-in-charge |
| 81 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge |
| 82 | Providing and fixing flase ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225 : 1987, non combustible as per BS 475 (Part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32mm of length 600 mm x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 12 mm outer diameter M-6 dast fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specificatins, drawing and all as specified and directed by Engr-in-charge |
| 83 | S&F 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge |
| 84 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge |
| 85 | M&L, Hard core of broken stone or boulders of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed by Engr-in-charge |
| 86 | M&L for PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundations filling and mass concrete all as specified and directed by Engr-in-charge |
| 87 | M&L for sand cushion 30 to 40 mm thick for laying and fixing interlocking tiles.M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating and for sand cushion 30 to 40 mm thick for laying and fixing interlocking tiles complete all as specified and directed by Engr-in-charge Note : for payment purpose punned thickness shall be measured. |
| 88 | M&L for Vitrified coloured heavy duty (Dura stone) tiles n exc 0.36 Sqm of 10 mm thick (300mmX300mm or 400mmX400mm of 10mm thick) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge |
| 89 | M&L for 60mm thick machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-35 grade, with topping of cement mixed without pigment. Colour and shape shall be all as specified and directed by Engr-in-charge |
| 90 | M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 (12.5mm graded aggregate) complete all as specified and directed by Engr-in-charge |
| 91 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engr-in-charge |
| 92 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed by Engr-in-charge |
| 93 | Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed by Engr-in-charge |
| 94 | Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and directed by Engr-in-chargeNote :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account. |
| 95 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as specified and directed by Engr-in-charge |
| 96 | All as per item no 94 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 97 | All as per item no 94 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 98 | All as per Srl item No 94 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 99 | All as per Srl item No 94 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly. |
| 100 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge |
| 101 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 102 | S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 103 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 104 | S&F electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed by Engr-in-charge |
| 105 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 106 | S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge |
| 107 | S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge |
| 108 | S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge |
| 109 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified and directed by Engr-in-charge Including taking down old sub main wire. |
| 110 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion all as specified and directed by Engr-in-charge Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 111 | S&F in replacement 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and fixing replacement LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge. |
| 113 | S & F replacement LED light fitting 1X9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize all as specified and directed by Engr-in-charge |
| 114 | S & F in repairs LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LeD lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge |
| 115 | Supply and fixing replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge |
| 116 | Supply and fixing LED luminaire 18/22 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp white/warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 117 | Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V,1200mm sweep,Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge. |
| 118 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers all as specified and directed by Engr-in-charge |
| 119 | Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 3.5 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately all as specified and directed by Engr-in-charge |
| 120 | M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels all as specified and directed by Engr-in-charge |
| 121 | Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed by Engr-in-charge |
| 122 | Supply and fix electric water heater, storage type with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with digital temperature display complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all GI connection (cutting T, inserting all type of (Elbow, Nipple) complete all as specified and directed by Engineer-in-Charge. |
| 123 | Supply and fix electric water heater, storage type with SS inner tank and heating element upto 2 KW capacity 35 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all GI connection (cutting T, inserting all type of (Elbow, Nipple) complete all as specified and directed by Engineer-in-Charge. |
| 124 | Supply and fix electric water heater, storage type with SS inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all GI connection (cutting T, inserting all type of (Elbow, Nipple) complete all as specified and directed by Engineer-in-Charge. |
| 125 | Supply & Fixing of 25A MCB Protected Heavy Duty AC Box with 16A Plug top for AC, Refrigerator, Geyser, Industrial Use complete all as specified and directed by Engr-in-charge |
| 126 | GI Fastner bolts including nuts washer off sizes 4/6 Inch suitable for fixing of any capacitty geysers as required at ite to the entire satisfaction of Engineer-in-Charge. |
| 127 | Supply & Fixing of PVC insulated Top plug 3 pin 15 Amp (ISI Marked) complete all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender