Tender For Addition/Alteration To Existing Toilet And Bathroom At Mcte Under Ge (Mcte) Mhow
Tender Value
38.90 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
2 days left
EMD
77800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Existing Toilet And Bathroom At Mcte Under Ge (Mcte) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Sep-2026 |
| 2 | 24-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Sep-2026 |
| 3 | 12-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L for Vitrified ceramic (double charged) tiles 8 to 10mm thick of any shade (square/ rectangular) area of each tiles as in floors exc. 0.42 and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 3 | All as per Srl item No. 2.00 above but, on vetical surface such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile as in floor exceeding 0.11 and not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified and directed. |
| 6 | Demolition of store slabs and tiles of any discription or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed. |
| 7 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. |
| 9 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each without taking of shutter from the frame and remove of the premises complete all as specified and directed. |
| 10 | S&F glazed (5.0mm thick plain/ coloured glass) alumnium door powder coated consisting of frame of 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangment with including necessary cutting hole in wall & floor door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size is 110 x 44mm & style of door shutter is 83 x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangement, floor spring and floor door stopper including necessary jointing cleats, glazing clips etc. (Aluminum section thickness 2mm) complete all as specified and directed. |
| 11 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc, complete all as specified and directed. |
| 12 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc. complete all as specified and directed. |
| 13 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc. complete all as specified and directed. |
| 14 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 15 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 16 | Supply, laying and testing for 20mm bore of GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 17 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 18 | Supply, laying and testing for 15mm bore of GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 19 | S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I, including dismantling old water tank 500 litre capacity complete all as specified and directed. |
| 20 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I, including dismantling old water tank 1000 litre capacity complete all as specified and directed. |
| 21 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 22 | Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. |
| 23 | M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 24 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 25 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 26 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and directed. |
| 28 | M&L for complete removal of existing surface and preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and directed. |
| 29 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces of ceiling surfaces and applying three coats of white wash etc. complete all as specified and directed. |
| 31 | M&L for Rendering in two coats first coat of 15mm thick and then 5mm thick on other than fair faces of stone exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 32 | M&L for complete removal of existing surfaces and applying two coats exterior weather coat over one coat of exterior primer over and incl two coat exterior grade wall putty etc. complete all as specified and directed. |
| 33 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items including taking down old water proofing treatment and removing rubbing to distance n.exc. 15mm capacity complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc. |
| 34 | M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed |
| 35 | S&F 0.50mm thick galvalume sheet profile pattern precoated coloured make JSW or TATA, blue scope building product or equivalent as approved by GE, fixed with self driving screws including dismantling of GI sheets complete all as specified and directed. |
| 36 | S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distances pieces, cleats etc. including dismantling old steel work complete all as speified and directed. |
| 37 | S&F in repair Vitreous china water closet rimless one piece EWC with slim sofit close seat cover 660 x 350 x 745mm concelled S trap for better aesthetic snow white - whiter than whitest complete all as specified and directed. |
| 38 | S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed. |
| 39 | S&F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size 360 x 360 x 120mm complete all as specified and directed. |
| 40 | S&F in repair bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm to 260 gsm/ 40mm to 270 gms) complete all as specified and directed. |
| 41 | S&F in repair Looking mirror 6.3mm thick exc. 5.50 each pane, Grinding, polishing and rounding edge of glass, drilling holes in glass any type fixed on wall with chorminum plated screws complete all as specified and directed. |
| 42 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 43 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 44 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 45 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 46 | S & F in repairs Bib tab 15mm bore cast copper fancy type chromium plated with crutch or butter fly handle serwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 47 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 48 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 49 | S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 50 | S&F in repair Toilet paper holder stainless steel fixed to wall complete all as specified and directed. |
| 51 | S&F in repairs two way bib tap/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 52 | S&F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed. |
| 53 | S & F in repairs 75mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 54 | S & F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 55 | S&F PVC (SWR) Bends/ door bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 56 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 57 | S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 58 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15 to 25mm to 142 - 455 gms) complete all as specified and directed. |
| 59 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. tube, complete all as specified and directed. |
| 60 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed. |
| 61 | S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size 100mm complete all as specified and directed. |
| 62 | S&F Aluminium handle cast type anodised size 150mm long complete all as specified and directed. |
| 63 | S&F aluminium anodised barrel tower bolts of extruded section with 150mm long bolt, complete all as specified and directed. |
| 64 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 65 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 66 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 67 | M&L for RCC type A-1, 1:1.5:3 (20mm graded aggregate) in chajja, roofs, landing, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 68 | S & F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm Half Stall white colour of premium quality including all fittings like CP coupling, sprender etc. complete all as specified and directed. |
| 69 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land complete all as specified and directed. Note:- Thickness of bed below the barrel of pipe 10 cm for pipe 100mm and 150mm dia, 15 cm for 200mm dia & over. |
| 70 | M&L for 150 ID/ 170 OD MM dia DWCPE SN-8 pipes premium quality single socketed in length with joints laid in trenches or in floors including all necessary fitting, joints etc. complete all as specified and directed. Note:- Thickness of bed below the barrel of pipe 10 cm for pipe 100mm and 150mm dia, 15 cm for 200mm dia & over. |
| 71 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep for foundation etc. or shafts, wells, cesspits, manholes pier holes, laying of cable & pipes etc. n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 72 | Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 73 | Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 74 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc. complete all as specified and directed. |
| 75 | M&L for Providing 50mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring/ subbase complete all as specified and directed. |
| 76 | M&L for sand filling under floors or in foundation including watering consolidation for laying interlocking tiles complete all as specified and directed. |
| 77 | M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-35 grade laid dry in floor/ path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed. |
| 78 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and fair including cutting joints and filling with bitumen and sand mixture complete all as specified and directed. |
| 79 | M&L for hardcore of broken stone or bounders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a floor/ true surface, complete all as specified and directed. |
| 80 | M&L for chequered cement concrete tiles 300cm x 300cm x 25mm thick, set jointed and pointed near cement slurry in floors including 15mm thick screed bedding in floor complete all as specified and directed. |
| 81 | Cleaning/ Disludging Manhole/ GT by excavating sludge depth 1.5 to 3 mtr depth and size not exceeding 4 cum each manual labour/ machenical scrappers etc. and disposal of the sludge including dumping of waste material out side the MoD land complete all as specified and directed. |
| 82 | Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 83 | M & L for concealed point wiring for One light/ fan controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 84 | All as per Srl item No. 84.00 above but One 3 pin, 5/6 Amps switch, socket outlet point on same board controlled by one, one way 5/6 Amps switch |
| 85 | All as per Srl item No. 84.00 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 86 | S&F Switch piano flush type 5/6 Amps single pole, one way complete all as specified and directed. |
| 87 | S&F Switch piano flush type 15/16 Amps single pole, one way complete all as specified and directed. |
| 88 | S&F Socket outlet, multi purpose having provision, 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 piano flush type complete all as specified and directed. |
| 89 | S&F Socket outlet, multi purpose having provision, 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 piano flush type complete all as specified and directed. |
| 90 | S&F lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed. |
| 91 | S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V, complete all as specified and directed. |
| 92 | S&F LED bulb of 9 watt, of base B-22, 6500 K suitable for fixing in lamp holder, complete all as specified and directed. |
| 93 | S&F in repair Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 94 | S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old unsv street light complete all as specified and directed. |
| 95 | S&F of MCB DB SPN 8 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 96 | S&F of MCB DB SPN 4 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 97 | S&F in replacement TPN 63 Amp rating 415V 10KA 'C' curve, mainiature circuit breaker (MCB) of TPN 63 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning by using lugs complete all as specified and directed. |
| 98 | S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 99 | Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 100 | S&F in replacement of exhaust fan, steel body, AC single phase 230/ 240 V of size 380mm sweep complete with blade, frame including making/ alteration of hole wherever necessary making good disturbed surfaces painting to match with existing surfaces and deposite and exhaust fan to MES E/M store complete all as specified and directed. |
| 101 | S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc. including taking down old fan and deposite to MES store complete all as specified and directed. |
| 102 | M&L for Sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated unsheathed 1100 volts grade, ISI marked multistranded copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessones including cutting chases for conduits as required, sinking for terminal box, making good the same including taking down old sub main wiring, complete all as specified and directed.Note:- Four runs of main copper conductor, two run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 103 | Supply & laying and testing commisioning cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 3.5 core laid in pipes, trenches/ ducts on poles including taking down old unsv cable, complete all as specified directed. |
| 104 | Supply & laying and testing commisioning cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core laid in pipes, trenches/ ducts on poles including taking down old unsv cable, complete all as specified directed. |
| 105 | M&L for filling approved fine crusted sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed.(Note : Punned thickness of sand shall be measured) |
| 106 | M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed. |
| 107 | Supply, laying of galvanised iron water pipe, medium grade of size 40mm bore laid in trenches/ on wall etc. complete with all stop valve, reducer of suitable size and GI accessories bends sockets etc. complete all as specified and directed. |
| 108 | Supply and laying jointing GI pipe light grade 50mm bore trenches/ under floor or roads/ along poles/ on walls incl clamps for protection of cable incl fittings complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Sep 19, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender