Tender For Special Repair To Bldg No. P-03, P-04 & P-06 At Fafa Basantar Lines Under Ge (West), Delhi Cantt-10
Tender Value
3.23 Crore
Estimated cost
Bid Submission
18 Sep 2026
25 days left
EMD
3.98 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. P-03, P-04 & P-06 At Fafa Basantar Lines Under Ge (West), Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed. |
| 2 | Demolition of mud phuska on roof slabs, any thickness including plastering, leaping cleaning of roof surfaces and removing the debris from the site complete all as specified and directed. |
| 3 | Dismantling of PVC water storage tanks exc 250 & n.exc 500 ltrs capacity and removing from site complete all as specified and directed. |
| 4 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 100mm complete all as specified and directed. |
| 5 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 75mm complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster or grit plaster or any type/ any thickness of plaster on walls incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.(Note : Rates of Scaffolding and necessary arrangement to carry out complete repair upto four storey building is included in this item. No extra payment will be done on this account.) |
| 7 | Taking down wooden/steel chowkhats/door/window frame including shutter (without taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to or from store complete all as specified and directed. |
| 8 | Taking down wooden/steel chowkhats/door/window frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as specified and directed. |
| 9 | Taking down shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 11 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified & directed. |
| 12 | Demolition of stone slabs and tiles of any description or thickness in floor or in any position laid bedded and pointed in any mortar complete all as specified and directed. |
| 13 | Taking up or down 15mm bore steel tubing and connections incl cleaning for refixing or removal to store complete all as specified and directed. |
| 14 | All as per item No. 16 above, but 20mm bore. |
| 15 | All as per item No. 16 above, but 25mm bore. |
| 16 | All as per item No. 16 above, but 40mm bore. |
| 17 | M&L for protection plaster 10mm thick on cement mortar 1:4 admixed with appropriate integral water proofing compound complete all as specified and directed.(Note : Supply only WPC shall be measured and paid separately) |
| 18 | M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed. |
| 19 | M&L for water proofing treatment to roof surface with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.5 Kg / Sqm of approved make black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 160 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.2 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Ltr/Sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing including applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions complete all as specified and directed.Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only.2. Bitumen primer, bitumen and membrane shall be of same make / manufacturer. (ii) The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size& making good in CM 1:3. |
| 20 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. Note: (Rate of WPC is included in unit rate quoted of this item) |
| 21 | Supply only Integral waterproofing compound. |
| 22 | Supply and fixing Heat Resistant Ceramic Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, complete all as specified and directed. |
| 23 | M&L 20mm CPVC pipes SDR 11, ISI marked with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed. |
| 24 | M&L 25mm CPVC pipes SDR 11, ISI marked with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed. |
| 25 | M&L 40 mm CPVC pipes SDR 11, ISI marked with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed including necessary fittings of all type. |
| 26 | M&L for cutting chases for inserting GI tubing in walls, floor etc and making good complete all as specified & directed. |
| 27 | S&F rotational moulded polythylene water storage tanks 500 Ltrs capacity, ISI marked triple layered (cylindrical vertical with closed up) hoisted and fixed in position complete all as specified and directed. |
| 28 | S&F of 110mm dia PVC (SWR) pipes, ISI marked single socketed in any length with rubber ring joints fixed to walls and trenches, including necessary stack clamps for fixing pipes to walls and ceilings of as required complete all as specified and directed. |
| 29 | S&F of 75 mm dia PVC (SWR) pipes, ISI marked single socketed in any length with rubber ring joints fixed to walls and trenches, including necessary stack clamps for fixing pipes to walls and ceilings of as required complete all as specified and directed. |
| 30 | S & F bends 110mm dia PVC (SWR) bends complete all as specified and directed. |
| 31 | S & F bends 75mm dia PVC (SWR) bends complete all as specified and directed. |
| 32 | S & F 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval acces door complete alla as specified and directed. |
| 33 | S & F 75mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval access door complete all as specified and directed. |
| 34 | S&F 110 mm bore vent cowl for 110mm bore of PVC (SWR) pipe, complete all as specified and directed. |
| 35 | S & F 75mm dia PVC (SWR) floor trap, plain with 100mm stainless steel grating including jointing with solvent cement complete all as specified and directed. |
| 36 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 37 | S&F in repair European vitretious china wash down water closet pan (pedestal pattern) and Trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., including flush pipe of polyethylene of low or high density or PVC 32 mm dia and its all joints and pvc seat cover (white), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 38 | S&F in repairs vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed. |
| 39 | S&F in repairs CI floor trap with grating including jointing to waste pipe in run lead with dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and directed. |
| 40 | S&F in repair PVC (SWR) bends 150 mm bore complete all as specified and directed. |
| 41 | S&F in repair PVC (SWR) 150 mm bore rain water pipes single socketed in any length with rubber ring joints fixed to walls / spout pipe complete all as specified and directed. |
| 42 | S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, chajjas with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165, complete all as specified and directed. |
| 43 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed. |
| 44 | S &F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I). klin seasoned and chemically pressure treated complete all as specified and directed. |
| 45 | M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door/window frame complete all as specified and directed. |
| 46 | M&L in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door/window frame complete all as specified and directed |
| 47 | S&F butt hinges 100mm size, medium weight cold rolled mild steel and fixed to angle iron /steel chowkhat complete all as specified and directed. |
| 48 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. |
| 49 | S&F aluminium anodised barrel tower bolt, ISI marked extruded section 200mm size. |
| 50 | S&F aluminium anodised Handles for 150mm size, ISI marked |
| 51 | S&F aluminium anodised Handles for 100mm size, ISI marked |
| 52 | S&F 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 53 | S&F 4.0 mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 54 | S&F 4 mm thick sheet glass ordinary quality and glazing in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 55 | S&F 100 mm hasp and staple, mild steel stove enamelled black. Including bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 56 | M&L for Preparation of new or previously untreated surfaces of wood or wooden base surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L for Preparation of new or previously untreated surfaces of steel surfaces of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over and incl a coat of red-oxide primer complete all as specified and directed. |
| 58 | M&L for Preparation of old wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | All as per item No. 58 above but one coat of paint on old steel surfaces. |
| 60 | M&L for rendering 10mm thick ready mix plaster on fair faces on other than fair faces of brick work or concrete surfaces of walls finished fair and even without using extra cemet and in multistorey building , complete all as specified and directed. |
| 61 | M&L for rendering 15mm thick ready mix plaster on fair faces of brick work or concrete surfaces of walls finished fair and smooth without using extra cement even hieght in multistorey building , complete all as specified and directed. |
| 62 | M&L for 5mm thick ready mix plaster on fair faces finished fair and even surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified and directed. |
| 63 | Complete removal and preperation of old surfaces of walls by scrapping with mechanical grinders complete all as specified and directed. |
| 64 | M&L for two coats of oil bound distemper including preparation of new plastered surfaces over one coat of alkali resistant primer & including 1mm thick wall care putty complete all as specified and directed. |
| 65 | M&L for two coats of oil bound distemper on old surfaces of walls incl one coat of alkali resistant primer & including 1mm thick wall care putty complete all as specified and directed. |
| 66 | M&L three coat of white washing on newly plastered surfaces of walls including preparation of surfaces. |
| 67 | M&L two coats of white washing on old plastered surfaces of walls including preparation of surfaces. |
| 68 | M&L two coat of OBD including a coat of primer primer on newly plastered surfaces of ceiling preparation of surfaces. |
| 69 | M&L two coat of OBD including a coat of primer primer on old plastered surfaces of ceiling preparation of surfaces. |
| 70 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. |
| 71 | M&L for preparation of newly plastered surfaces of walls and providing and o prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. |
| 72 | M&L for 18-20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 20mm tihck cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 73 | M&L for non skid colour ceramic rectified tiles 6-8 mm thick (square/rectangular) area of each tiles exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 74 | M&L for coloured printed glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:3, complete all as specified and directed. |
| 75 | M&L for non skid colour ceramic rectified tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:3) complete all as specified and directed. |
| 76 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic complete all as specified and directed. |
| 77 | M&L for 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including 6mm thick AC building board or commercial plywood and fixed 1st class Hard wood moulding frame and two Nos. hanging clips including taking down old unserviceable looking mirror complete all as specified and directed. |
| 78 | S&F in repair aluminium anodised tubular towel rail 20mm dia, D type 60 cm long between flanges, complete all as specified and directed. |
| 79 | S&F curtain rails of anodized aluminium alloy with fixing brackets stops and rollers etc complete all as specified and directed. |
| 80 | S&F in repair sink made of stainless steel 1mm thick, ISI marked for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 495 x 420 mm, bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. |
| 81 | S&F in repairs 15mm dia bib tap, ISI marked fancy type brass with capstan head chromium plated screwed down high pressure with long screwed shank and flynut screwed complete all as specified and directed. |
| 82 | S&F in repairs 15mm dia chromium plated bib tap, ISI marked cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 83 | S&F brass CP vertical mixer for mixing hot & cold water, ISI marked for wash hand basin screwed down for 15 mm bore iron pipe of ferrule complete all as specified and directed. |
| 84 | S&F CP wall mixer non telephonic type 3-in-1 mixing hot and cold water, ISI marked for shower screwed down for 15 mm brass iron pipe of ferrule of complete all as specified and directed. |
| 85 | S&F in repairs stop valve 15mm bore fancy type chromium plated, ISI marked with long shank and cup (concealed type) complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore stop valves/angle valves, ISI marked cast copper alloys, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 87 | S&F in repairs 20mm bore of Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 88 | S&F in repair PVC connection 600mm long with 2 Nos brass check nuts, suitable for 15mm bore complete all as specified and directed. |
| 89 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminum rod and high density polythene float and flynut complete, screwed for iron pipe or brass furrule size 25mm bore. (Min weight 210gms complete all as specified and directed.) |
| 90 | S&F in repairs shower rose, chromium plated brass, fancy type, ISI marked 125 mm with or without swivel joint, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 91 | M&L for machine cut Kota stone slab 20 to 25 mm thick full length as in treads, risers of staicase laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including cement screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 92 | S&F stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm including complete all as specificed and directed. |
| 93 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 94 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded pre-laminated PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined suitable PVC sheet beading and joined together with solvent cement and provision of partially louvered frame supply and fixing in the frame at site. Complete all as per specification & sample kept in GE office and as directed.Make Rajshree/Sintex/Plastiwood. |
| 95 | Supply and fixing of 20 mm thick solid WPC board both side prelaminated with 1mm pvc laminate (Density not less than 750kg/cum) on 18mm Brown Base WPC Board DENSITY not less than .650kg/cum for cabinet boxes & shutter , cup boards, drawer, etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement complete all as specified and directed.. |
| 96 | Supply and fixing of 18 mm thick solid WPC board both side Balancing white DENSITY not less than 750kg/cum for cabinet boxes & shutter , cup boards, drawer, etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement complete all as specified and directed. |
| 97 | S&F of SS auto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as specified and directed. |
| 98 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass polished bright finished complete all as specified and directed. |
| 99 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
| 100 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender