Tender For Repair To Miscellaneous Furniture Items Including Charpoy Gi Pipe At Ge Faridkot Mil Stn
Tender Value
35 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
22 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Miscellaneous Furniture Items Including Charpoy Gi Pipe At Ge Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | CHARPOY GI PIPE : FD-220Removing old unserviceable plywood top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7ply, type BB, of size 900x1950mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing. Make of ply wood : Kit ply |
| 2 | Removing old unserviceable 3 way elbow and S&F new 3 way elbow of GI, 32mm bore, (ISI Marked), weight not less than 400 grams each complete all as specified and directed. |
| 3 | Removing old unsv stiffener of MS flat and S&F new stiffener of MS flat size 32mm x 860mm x 5mm thick, including gas welding and one coat of primer complete all as specifed and shown on drg. |
| 4 | Removing old unserviceable check nut and S&F new check nut of GI, 32 mm bore, weight not less than 100 gram eachs complete all as specified and directed. |
| 5 | Dismantling old unserviceable long rail and S&F new long rail made out of GI tubing 32mm bore, medium grade duly threaded at both ends complete all as specified and shown on drawing. |
| 6 | Cutting of old existing unserviceable long rail retrieved from item No. 5.4 here-in-before and converting into two short rails duly threaded at both ends complete all as specified and shown on drawing. |
| 7 | Dismantling old unserviceable short rail, cutting and converting into two legs, one end of leg be threaded all as shown on drawing complete all as specified and directed. |
| 8 | CHARPOY FOLDING IP WITH HARD TOP : FD-388 (R) Dismantling old unserviceable plywood top and S&F new 8mm thick,plywood top, BWR grade complete all as specifed and shown on drawing |
| 9 | M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point. |
| 10 | Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed |
| 11 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 12 | CHARPOY MS PIPE WITH PLY TOP : Removing old unserviceable plywood top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7 ply, type BB, of size 900x1974mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing. Make of ply wood : Kit ply |
| 13 | Taking out old UNSV long rail and S&F new long rail made out of 20 mm x65 mm 1.6mm, made of MS square pipe and one coat of primer complete all as specifed and shown on drg complete all as specified and directed . |
| 14 | Taking out old UNSV Short Rail and S&F new short rail made out of 20 mm x65 mm 1.6mm, made of MS square pipe and one coat of primer complete all as specifed and shown on drg complete all as specified and directed . |
| 15 | Dismantling unsv stiffener and S&F new stiffener, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg. |
| 16 | Removing old UNSV head rest and S&F of new head rest made to shape, out of 38 mm square tube having wall thickness 1.6mm with gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg. |
| 17 | Removing old UNSV Foot rest and S&F of new Foot rest made to shape, out of 38 mm square tube having wall thickness 1.6mm with gas welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg. |
| 18 | Removing old UNSV shoe and S&F new PVC rubber shoe of size 38mm at bottom of the leg complete all as specified and shown on drg. |
| 19 | Gas welding of broken spot of 25mm dia pipe complete all as specified and directed . |
| 20 | M&L for denting & painting of steel surfaces, exposed to view when placed in position and applying two coats of synthetic enamel black paint after preparation of old surfaces complete all as specified and shown drg . Make : Asian/Nerolac |
| 21 | CHAIR CUSHIONED WITH ARMS : TPReplacing unsv arms handle, made of ply propylene ,co-polyme complete all as specified and directed . |
| 22 | Removing unsv cushion seat & back with upholestered tapestry cloth and PVC beading and S&F fabric & moulded polyurethane foam with PVC lipping (beading) all round of seat,foam density 40 with upholestered tapestry cloth (providing New materials in superior quality) complete all as specified and directed . |
| 23 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 24 | CHAIR WRITING STEEL : FD/E6/MAP/12S&F in replacement unserviceable arms handle black integral skin made of ply propylene ,co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and shown on drawing |
| 25 | Removing unserviceable cushion seat & back with upholestered tapestry cloth including PVC beading and providing New cushion seat & back of density 40mm with upholestered tapestry cloth not less than Rs 250 per meter including PVC beading and providing in serviceable condition duly repaired in all respect complete all as specifed and shown on drawing |
| 26 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 27 | CHAIR REVOLVING STEEL WITH ARMS : (TP)S&F in replacement unserviceable arms handle black integral skin made of ply propylene ,co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and shown on drawing |
| 28 | M&L for replacement of unserviceable wheel of chair as per existing complete all as specified and directed |
| 29 | M&L for replacement of hydroulic fittings of chair as per existing complete all as specified and directed |
| 30 | M&L for replacement of base assembly of chair as per existing complete all as specified and directed |
| 31 | Removing of unserviceable cushion seat, padded back with upholestered leather/tapestry cloth, padded cushion of arms and providing new cushion seat of density 40mm, padded back with upholestered leather/tapestry cloth, padded cushion of arms complete all as specifed and shown on drawing |
| 32 | CHAIR COMPUTER : TPReplacing the existing UNSV wheel with new wheel of same or superior quality complete all as specified and directed. |
| 33 | Replacing the existing UNSV hydrolic fitting with new hydrolic fitting of same or superior quality complete all as specified and directed. |
| 34 | Replacing the existing UNSV base assembly with new base assembly of same or superior quality complete all as specified and directed. |
| 35 | Removing UNSV cushioned seat & back padded with upholestered tapestry cloth and providing the same with new materials of same or superior quality and repair/removing of UNSV parts of tilting mechanisam with swivel system and providing in serviceable condition duly repaired in all respect as directed . |
| 36 | CHAIR SCHOOL WITH HARD BOARD : FD/E6/MAP/05 Dismantling old unsv seat/back and S&F new one piece seat & back made of polypropylene ,co-polymer, weight not less than 1.2 Kg, moulded to shape all as shown on drg . |
| 37 | Removing old unsv shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drg. |
| 38 | Gas welding of broken spot of 25mm dia pipe complete all as specified and directed . Note:-Welding alround shall be consider as one point. |
| 39 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 40 | CHAIR VERANDAH : FD-256, 19(M) Removing old unsv cane/nylon newar from chair varandah and recanning with new plastic cane 4.00mm wide, half round, in white/yellow colour complete all as specified and shown on drg. |
| 41 | Dismantling old unsv leg and S&F new \\"U\\" shape leg made of 15 mm dia MS tube having 1.6mm wall thickness, welded by gas/electric welding and one coat of primer complete all as specifed and shown on drg complete all as specified and shown on drg. |
| 42 | Removing old unsv shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drg. |
| 43 | Gas welding to broken spot of 20mm round pipe of chair varandah complete all as specified and directed .Note:- Welding alround shall be considered as one point. |
| 44 | M&L for preparation of old painted surfaces of chair verandah and applying one coat of snythetic enamel paint (white colour) on chair verandah complete all as specified and directed. |
| 45 | CHAIR VERANDAH : FD/MAP/12Removing old UNSV plastic seat & back and S&F new PVC seat & back, 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick and weight of the PVC seat & back shall not be less than 1.85 kg.complete all as specified and shown drg . |
| 46 | Dismantling existing UNSV 'U' shaped legs and S&F new 'U' shaped legs made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drg. |
| 47 | Dismantling existing UNSV rear & front tube of seat and S&F rear & front tube of seat made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drg. |
| 48 | Gas welding to broken spot of 20mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point. |
| 49 | Removing old unsv shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drg. |
| 50 | M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (white colour) on chair verandah complete all as specified and directed. |
| 51 | CHAIR CB STEEL WITH ARMS : FD-75 (M)Removal of old bottom seat of chair CB steel with arms S&F new seat made of timber hard wood well seasoned duly canned with plastic cane 2mm to 2.5mm wide half round to be woven in Godrej pattern and fixed with appropriate size of nuts and bolts. |
| 52 | All as per itm No 5 (a) here-in-before but back seat |
| 53 | Removal of old arm hard wood of chair CB steel with arms S&F new arm hand wood made of seasoned hard wood. |
| 54 | Gas welding to broken spot of 25mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point. |
| 55 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 56 | S&F of New shoe of hard rubber as approved quality after removing the old unserviceable existing shoe . All as specified and shown on drawing. |
| 57 | CHAIR CB STEEL WITHOUT ARMS : FD-75 (M)Removal of old bottom seat of chair CB steel with arms S&F new seat made of timber hard wood well seasoned duly canned with plastic cane 2mm to 2.5mm wide half round to be woven in Godrej pattern and fixed with appropriate size of nuts and bolts. |
| 58 | All as per itm No 5(a) here-in-before but back seat |
| 59 | Gas welding to broken spot of 25mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point. |
| 60 | M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed . |
| 61 | S&F of New shoe of hard rubber as approved quality after removing the old unserviceable existing shoe . All as specified and shown on drawing. |
| 62 | TABLE CENTRE BRASS FD-375 Taking out old cracked/broken top and S&F new 12mm thick plate tinted glass top with corners rounded as shown drawings complete all as specified and directed . |
| 63 | M&L for Gas welding to broken parts of frame alround duly polished with brasso to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point. |
| 64 | 18 mm Thick prelaminated particle boards size 8' x4' Dismenaling of existing unserviceble top and S&F new top 18 mm thick prelainated particle boad size 8'x4' one side natural teak wood beading alround the top 4mm thick shall be provided Rest all shown on drawings and as specified and all as per directd by Engr-in-Charge. |
| 65 | TV Trolley (FD/E6/MAP/04 (R) Removing old unserviceable existing top and S & F new top made of 18mm pre-laminated Particle board, exterior grade including stanard PVC edging alround complete all as specified and shown on drawing. |
| 66 | Removing unserviceable existing glass of shutter & stainless steel channel and S & F 5.5mm thick glass & stainless steel channel duly screwed alongwith handle and magnetic catcher complete all as specified and shown on drawing. |
| 67 | Removing old unserviceable existing castor wheel and S & F new 50mm dia swivel type castor wheel on bottom of trolly complete all as specified and shown on drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender