Tender For Certain Rev/Lbw/Mw Works Under Age B/R-Ii At Mil Stn Kapurthala Under Ge Kapurthala.
Tender Value
42.78 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
17 days left
EMD
85560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Rev/Lbw/Mw Works Under Age B/R-Ii At Mil Stn Kapurthala Under Ge Kapurthala.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Certain Rev/LBW/MW works under AGE B/R-II at Mil Stn kapurthala under GE Kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or man holes, cesspits etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed. |
| 3 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, including removal of excavated earth upto a distance 500m from starting point complete all as specified and directed. |
| 4 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified. |
| 5 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed. |
| 6 | M&L for plain cement concrete (1:5:10) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete and as in sub base of floors complete all as specified. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc; all as directed. |
| 8 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as directed. |
| 9 | Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises. |
| 10 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n.exe 4 sqm each |
| 11 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each |
| 12 | Dismantling of wall lining or ceiling of any description fixed in any position fixed with nails/screws including fillets. |
| 13 | Dismantling of framed trusses span n.exc 10 , complete all as specified and directed |
| 14 | Form work to sides of concrete foundations, footings, bases of columns, plinth beams and similar work etc for rough finished surfaces of concrete all as specified and directed. |
| 15 | Form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete all as specified and directed. |
| 16 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams all as specified and directed. |
| 17 | Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exceeding 20 cm wide complete all as specified. |
| 18 | M&L for RCC M-25 as in foundation including raft, footings, foundation plinth beams bases of columns and the like complete all as specified and directed. |
| 19 | M&L for RCC M-25 as in lintels and roof beams like complete all as specified and directed. |
| 20 | M&L for RCC (Design Mix) M-25 (20mm grade) as in columns, pillars, piers, posts and struts all as specified and directed. |
| 21 | Form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete. |
| 22 | M&L for RCC M-25 as in slab supported on walls, beams and column in floor roofs landing the like complete all as specified and directed. |
| 23 | M&L for mild steel TMT bars10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed. |
| 24 | - ditto - all as per item No. 22 here in before but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders all as specified and directed. |
| 25 | Formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 26 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas , manhole cover , tank platform etc. complete all as specified and directed by Engineer-in-charge. |
| 27 | Providing cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in copings, benching, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,etc including necessary form work complete. |
| 28 | M&L for brick work with fly ash bricks (old size bricks) straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 29 | M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement all as specified and directed. |
| 30 | M&L for applying two coat of cement base paint on new plastered surfaces of walls over a coat of cement primer including preparation of surfaces complete all as specified and directed. |
| 31 | M&L for mild steel work as in angle iron, flat iron posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and necessary provision of V – notch including welding and cutting at bottom etc; and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed. |
| 32 | M&L for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. (Each line to be measured separately) |
| 33 | M&L for for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer incl prepration of new steel or iron surfaces exc 10cm width or girth all as specified as directed. |
| 34 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed. |
| 35 | Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 36 | M&L for hardcore of broken stone or boulders of gauge n. exc 63mm, deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 37 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregates finished even & smooth without using extra cement complete all as specified and directed. |
| 38 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 39 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc; complete |
| 40 | M&L for pre-cast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers and set in cement mortar (1:4) including form work complete all as specified. (Reinforcement measured separately). |
| 41 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base all as specified and directed. |
| 42 | M&L for for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as directed. |
| 43 | M&L for vitrified ceramic light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 Sqm and n exe 1.00 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 44 | M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) including dismantling and rubbish off the premises complete all as specified and directed. |
| 45 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 46 | M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in vertical surface such as skirting dados and jointed in neat cement paste and pointed in white or colour cement to match the tiles, including 10 mm thick rendering in cement mortar (1:4) including dismantling and rubbish off the premises complete all as specified and directed. |
| 47 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement Paste pointed in white or colour cement to match the colour, including 10 mm thick cement screed bed (1:4) complete all as specified and directed. |
| 48 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 49 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 50 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 51 | M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed. |
| 52 | M&L for 10mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth with out using extra cement in ceiling etc; complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla 1.00mm thick white putty complete all as specified and directed. |
| 54 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla 2.00mm thick white putty complete all as specified and directed. |
| 55 | M&L for preparation of new plastered or unplastered surfaces of walls or cornic and applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note:- Exterior emulsion paint to be done by Roller. |
| 56 | S&F of anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc; complete all as specified and directed. |
| 57 | S&F of anodised aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door anodised alumnium snap beading, screws etc; complete all as specified and directed. |
| 58 | S&F of anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc; complete all as specified and directed. |
| 59 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 60 | S&F of aluminium body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 61 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 62 | M&L for PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed. |
| 63 | S&F of factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed. |
| 64 | S&F of factory made 2nd class hard wood plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 65 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm |
| 66 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long. |
| 67 | S&Fof aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 68 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 69 | S&F of steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, |
| 70 | S&F of steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 71 | S&F of steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC. |
| 72 | S&F of stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws , aluminium clips , complete all as specified and directed by engineer-in-Charge. |
| 73 | S&F of 4.00mm thick sheet glass, ordinary quality in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 74 | S&F of 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 75 | S&F of 5.5mm thick sheet glass, pinhead type in squares exc 0.5 sqm each pane and glazing with aluminium staples complete all as specified and directed. |
| 76 | S&F of 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified complete all as specified and directed. |
| 77 | Supply only integral water proofing compound. |
| 78 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. |
| 79 | S&F of factory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1complete all as specified and directed. |
| 80 | S&F of alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed. |
| 81 | Cutting chases, pinning in, making good to facing through brick wall where reqd and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth. |
| 82 | S&F of GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4. |
| 83 | S&F of GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 84 | S&F of vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed. |
| 85 | S&F of vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 86 | S&F of 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 87 | S&F of concealed 15mm dia of pipe stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed. |
| 88 | S&F of 15mm angle valve fancy type of CP cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed. |
| 89 | S&F of PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed. |
| 90 | S&F of brass choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete all as specified and directed. |
| 91 | S&F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 92 | S&F of PTMT Corner shelf with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed. |
| 93 | S&F of soap-dish chromium plated complete all as specified and directed. |
| 94 | S&F of 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and directed. |
| 95 | S&F of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 96 | S&F of 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 97 | S&F of 75 mm PVC (SWR) bend complete all as directed. |
| 98 | S&F of 110 mm PVC (SWR) bend complete all as directed. |
| 99 | S&F of PVC(SWR) floor trap with CP grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 100 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 101 | S&F of 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 102 | S&F of 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. |
| 103 | S&F of 110 mm bore PVC (SWR) vent cowl. |
| 104 | S&F of PVC (SWR) gully trap 125/110 mm setting and jointing with solvent , cement |
| 105 | S&F of 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore. |
| 106 | M&L for cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of RCC NP-2 pipe 200mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified |
| 107 | M&L for reinforced concrete 150 mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and directed. |
| 108 | M&L for RCC septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 20 users. |
| 109 | M&L for soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80 m dia X 3.0m effective depth |
| 110 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips all as specified. |
| 111 | S&F of PVC hollow wall panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed by Engineer-in-Charge. |
| 112 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed. |
| 113 | M&L fot steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified. |
| 114 | S&F of mild steel bolts of dia exc 12mm and n exc 20 mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long |
| 115 | M&L for preparation of New steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide |
| 116 | Dismantling corrugated asbestos sheet in roof covering. |
| 117 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 118 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 119 | M&L for providing cement concrete (1:2:4 ) type B0 12.5mm graded aggregate in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed. |
| 120 | M&L for providing 100mm thick cement concrete (1:2:4 ) type B1 20mm graded aggregate finished even and smooth without using extra cement complete all as specified and directed. |
| 121 | M&L for for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified and directed. |
| 122 | M&L for sand filing under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 123 | M&L for precast cement concrete block masonary with solid block (size 30x20x10 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in mortar 1:4 complete all as specified and directed. |
| 124 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 125 | M&L for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, socket, bell push, fan regulators etc. as required at site complete all as specified and as directed for the following points :- |
| 126 | One light point controlled by one 1-way switch. |
| 127 | One ceiling / exhaust fan point controlled by one switch. |
| 128 | One three pin socket out let 5 amps on independent board complete. |
| 129 | One three pin socket out let 5 amps on same board complete. |
| 130 | - ditto - all as per item No 123 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 131 | S&F of switch type 6A 240 Volts complete all as specified and directed. |
| 132 | S&F of switch type 15A 240 Volts complete all as specified and directed. |
| 133 | M&L for ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed |
| 134 | S&F of socket outlet 2 in 1, 3 pin, 5/6 amp 2 module type with shutters complete all as specified and directed. |
| 135 | S&F of socket outlet 2 in 1, 3 pin, 5 and 15 amp type 2-module shutters complete all as specified and directed. |
| 136 | S&F of lamp holder, PVC/Polycarbonate angular type LED lamp base B-22 (holder type) 7 watts complete all as specified and directed. |
| 137 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with remote controle (Colour of ceiling fan wil be approved by GE) complete all as specified and directed. |
| 138 | S&F of metallic heavy duty xhaust fan copper wound heavy duty double ball bearing with louvers and shutters, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 rpm, 240V, complete all as specified and directed. |
| 139 | S&F of LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders, including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 140 | S&F of LED light fitting mirror type with high out put diffuser 2 feet, 10/16 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. |
| 141 | S&F of LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with complete all as specified and directed. |
| 142 | S&F of LED decorative wall Lights 20 watt 230 V complete all as specified and directed. |
| 143 | S&F of sheet steel factory made, powder coated MCB DB with bus bar 200Amps neutral link, earth bar, double door SPN 12 way 230 volts complete all as specified and directed. |
| 144 | S&F of sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, earth bar, double door SPN 8 way 230volts complete all as specified and directed. |
| 145 | S&F of single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp complete all as specified and directed. |
| 146 | S&F of MCB Single pole 240 volts 6-32 Amps, 10KA, B-series, complete all as specified and directed. |
| 147 | S&F of MCB SPN 240 volts 06- 32 Amps, 10KA, B-series complete all as specified and directed. |
| 148 | S&F of electric water heater, storage type steel body with mettalic inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, mounting bolts, 450 mm long steel braided connection piece with end terminal of brass etc; complete all as specified and directed. |
| 149 | M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note:- (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. |
| 150 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed. |
| 151 | M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjecent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed. |
| 152 | S&F of GI tubing medium grade 25 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item) |
| 153 | S&F in replacement of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 25 mm bore complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender