Tender For Construction Of Road Along With Side Drain From Near Damber Chowk To Mandir Dara ,Melli Road Within Ward No. Iv Under Kalimpong Municipality
Tender Value
39.48 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
23 days left
EMD
78972
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Road Along With Side Drain From Near Damber Chowk To Mandir Dara ,Melli Road Within Ward No. Iv Under Kalimpong Municipality
BOQ
| Sl. No. | Item Description |
| 1 | 1:2:4 ( 1 Cement : 2 coarse sand (zone -III) derived from natural sources:4 graded stone aggregate 40 mm nominal size derived from natural sources ) |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 3 | 1:1 :3 (1Cement :1 coarse sand ( zone -III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources ) |
| 4 | Steel reinforcement for R.C.C work including straightening ,cutting ,bending ,placing in position and binding all complete above plinth level .Mild steel and medium Tensile steel bars |
| 5 | 20mm cement plaster of mix 1:4 ( 1 Cement : 4 fine sand ) |
| 6 | Neat Cement punning |
| 7 | Add Cost Index @ 37 % |
| 8 | Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). |
| 9 | Supplying and laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces and preparing the bed to proper level and filling up all joints with sandy clay or earth. |
| 10 | Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). GRADING 1 |
| 11 | Prime CoatProviding and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including Clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). |
| 12 | Bituminous MacadamProviding and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). or Grading II (19 mm nominalmaximum aggregate size) LayerThickness 50-75mm |
| 13 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavementsurface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). |
| 14 | MASTIC ASPHALT 25mm THICKMASTIC ASPHALT Providing and laying 25 mm thick mastic asphalt wearing course with approved grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumenprecoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100°C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 (Reference to MORT&H's specification clause 516 along with IRC:107). |
| 15 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender