Tender For Comprehensive Maintenace And Certain Repairs Of Sewage Line Etc At Abhm,Abhm Anx And Sp Marg Under Ge New Delhi
Tender Value
1.48 Crore
Estimated cost
Bid Submission
22 Sep 2026
29 days left
EMD
2.23 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenace And Certain Repairs Of Sewage Line Etc At Abhm,Abhm Anx And Sp Marg Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 2 | M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer paint and 1.5mm thick wall care putty complete all as specified and directed. |
| 3 | M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 4 | M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed. |
| 5 | M&L for complete removal of existing treatment and applying two or more coats of Plastic emulsion paint contains an acrylic polymer emulsion, (ready mixed 1st quality) having of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on new work over a coat of primer over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment and applying texture paint as per design and shape and size shall be as directed by engr-in charge with 1st quality of glossy or matte plastic emulsion paint over a coat of base paint over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 7 | M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed. |
| 8 | M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 10 | M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed. |
| 11 | M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 12 | M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 14 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L for rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for 15mm thick cement plastering on brick or conc surfaces in CM 1:4 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 17 | M&L for 5mm thick reeady mix plaster READIPLAST RP of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as Ultratech seal and Dry 5 Plus as per manufacturers instruction including finished even and smooth on soffits/ceiling surfaces (The work shall be carried out upto sixth storey height of buildings including all safety factor) complete all as specified and directed |
| 18 | Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed. |
| 19 | M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of distemper oil emulsion complete all as specified and directed. |
| 20 | M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed. |
| 21 | M&L for finishing wall with Acrylic smooth exterior paint of required shade: New work ( two or more coats applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) complete all as specified and directed. |
| 22 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry (white/ with pigment to match existing surafe) on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 marble powder : 2 marble chipping (one or more colour) 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble chippings complete all as specified including complete removing existing grit plaster (Payment for providing grooves shall be made seperately) complete all as specified and directed.Note :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to 6th storiess building and deploy skilled labourers to execute the work) including demolition of existing finished and remove all debries out of MoD land. |
| 23 | M&L for preparation of exposed surface of rusted steel reinforcement with metal wire brush cleaning the rusted surface free from loose rust and application of rust remover cum passivator applied with brush to the rusted reinforcement, application of rust remover with the help of wire brush, sand paaper and thoroughly washed with water with the help of pressure jet and allowing it to dry at all heights level complete including dismantling/ chipping off spalled/loose concrete cover of RCC surface of chajjas, parapets, railings, beams, columns and the like with out disturbing the core of RCC member with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.Note :- Surface area of RCC surface shall only be measured for the purpose of payment only. |
| 24 | M&L for Preparation of surfaces of steel reinforcement by cleaning thoroughly and providing, mixing and applying zinc-anti-rust agent as zink rich epoxy anticorrosive coating for corrosion protection system in two coats @ 0.20 kg/sqm/coat. The product should confirm carbonation resistance of 2 mm and bond strength > 1 N/ sq mm according to ASTM C 882-78. and as per manufacturers method of application to rebar corrosion protection system to reinforcement at all height levels complete all as specified and directed.Note :- Surface Area of steel reinforcement bar shall only be measured for the purpose of payment. |
| 25 | S&F additional reinforcement for strengthening the existing RCC structure, TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 26 | S&F steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/bond coat over steel mesh to receive concrete/ plaster complete all as specified and directed. |
| 27 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of avg 15 mm thickness.Note : Application of PMM shall be preferably be in coats of avg 15mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed. |
| 28 | M&L for laying Micro-concrete cement based pre-packed single component, chloride free, sulphate free, non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair as in chajjas,balcony beams, parapets/railing complete all as specified and directed.Note: (i) Work to be executed in multi storied bldg upto 25 meter height(ii) Steel scaffolding shall be provided and rate to be included in said items |
| 29 | M&L for uprooting plants (girth n.exc 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth complete all as specified and directed.Note: Work has to be executed in multi storey bldgs upto 25 Meter height |
| 30 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 31 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including Removing un-serviceable material out side MOD land complete all as specified and directed. |
| 32 | M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 33 | M&L for providing cement concrete as in roof kerbs, levelling courses for making proper gradient/ slope or mud stops rounded or chamfered on edges or plain with B-1, 1:2:4 using stone aggregate mixed with water proofing compound as per manufacture instruction including necessary form work and including demolition complete all as specified and directed.Note: water proofing compound to be measured separately |
| 34 | Demolition of old damaged existing water proofing compound on RCC roof of any description in any position and specification and cleaning the surface thoroughly and removing materials from MOD land complete all as specified and directed. |
| 35 | M&L for (a) 15 mm thick screed bed in cement mortar 1:4 on roof surface or concrete surfaces, finished even and smooth (without using extra cement) mixed with WPC (200ml per 50kg of bag of cement) complete all as specified and directed.(b) Applying evenly a coat of bitumen primer @ 0.50 Kg/Sqm. (c) Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.0 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (d) Sealing edges well into grooves & protect with CM 1:2 complete all as specified and directed. Make: Ms Asian Paints Ltd/ Ms Berger Paints/ Ms STP Ltd/ Ms Torchtar Bitumen Pvt Ltd |
| 36 | M&L for cement concrete tiles of size 25 cm x 25 cm x 20 mm thick, machine pressed, set, jointed and pointed in neat cement slurry with grey cement and no pigment in approch roofs over and including screed bed or bedding layer of cement mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 37 | M&L for surface Preparation: The plaster/concrete/pcc tile surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects by the use of soft brush, air compressor, brushing to attain smooth levelled surface. Application of Asian Paints two component Epoxy Primer (Resin & Hardener) or two specific coat of equivalent brands as specified by manufacturer on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and laying fiberglass mesh reinforce and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. pvc/ The same coating shall be applied in two coats achieving a total thickness of not less than 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt complete all as specified and directed.Make: Dr Fixit Roof seal 148/ Pidilite100/ Asian Paint smart care damp proof/ SIKA 710/715 |
| 38 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for not exc 500 litres complete all as specified and directed. |
| 39 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding or including 500 litres to 1000 Litres capacity of tanks complete all as specified and directed. |
| 40 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 1000 Litres capacity of tanks complete all as specified and directed. |
| 41 | Dismantling water tanks of capacity upto 500 litres complete all as specified and directed. |
| 42 | Dismantling water tanks of capacity exc 500 but not exc 1000 litres complete all as specified and directed. |
| 43 | Dismantling water tanks of capacity exc 1000 liters but not exc 2000 liters complete all as specified and directed. |
| 44 | S&F 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 45 | S&F 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 46 | S&F 2000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 47 | Refixing of dismantlied water tank of any size and the same position complete all as specified and directed. |
| 48 | S&F in repair 25/20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum eight 15mm-142gms/ 20 mm - 210 gms /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 49 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 50 | M&L for Brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story Bldg) complete all as specified and directed. |
| 51 | Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed. |
| 52 | M&L for Mild steel Framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed by Engg in charge. |
| 53 | M&L for Rectangular/squire Mild Steel Welded Wire Mesh of mesh size 25x25mm and dia 3mm fixed to MS frame work with welded complete all as specified and directed. |
| 54 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 55 | S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 56 | S&F structural mild steel work as in roof trusses (framed), trussed, post, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed. |
| 57 | M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 58 | M&L for providing injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 59 | M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed by Engg in charge. |
| 60 | M&L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 61 | Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed. |
| 62 | Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed |
| 63 | M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, floor, and like including 20mm thick screed bed in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of Udaipur green complete all as specified and directed. |
| 64 | M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in cooking platforms, lift wall, skirtings or in floor for design between udaipur green marble where ever required and likes on cement mortar bedding of 20mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 65 | All as per Item No 64.00 above but in vertical surface and 15MM back coat in CM 1:3 complete all as specified and directed. |
| 66 | Dismantling floor, hearth or wall tiling, interlocking, paver block any type or pattern including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 67 | M&L for super gloss vetrified floor tiles of size (600mm X 1200) in floors etc. set and jointed over screed, plaster or RCC surface, using a cement based Polymer modified tile adhesive conforming to IS 15477:2019 type 1 & EN 12004 C1T with green pro certificate. The adhesive shall be sourced from an approved manufacturer with in-house production facilities and ISO certification. The adhesive to be mixed thoroughly and applied with a bed thickness ranging from 3 mm to 12 mm, evenly spread & combed using notched trowel and gently press using rubber mallet. Tiles shall be gently pressed into place using a rubber mallet, maintaining a uniform joint spacing as directed by engr-in-charge , followed by grouting using epoxy quartz technology-based grout to ensure a durable, stain-resistant, and aesthetically finished surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 68 | All as per item No 67.00 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified and directed.Note : skirting shall be flashed with the wall surface |
| 69 | M&L for 600x600mm vetrified fllor tiles in floors etc. set and jointed over screed, plaster or RCC surface, using a cement based Polymer modified tile adhesive conforming to IS 15477:2019 type 1 & EN 12004 C1T with green pro certificate. The adhesive shall be sourced from an approved manufacturer with in-house production facilities and ISO certification. The adhesive to be mixed thoroughly and applied with a bed thickness ranging from 3 mm to 12 mm, evenly spread & combed using notched trowel and gently press using rubber mallet. Tiles shall be gently pressed into place using a rubber mallet, maintaining a uniform joint spacing as directed by engr-in-charge , followed by grouting using epoxy quartz technology-based grout to ensure a durable, stain-resistant, and aesthetically finished surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 70 | All as per item No 69.00 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified and directed.Note : skirting shall be flashed with the wall surface |
| 71 | M&L for vitrified floor tiles matt finish of size (600mm X 600mm) in floors etc. set and jointed over screed, plaster or RCC surface, using a cement based Polymer modified tile adhesive conforming to IS 15477:2019 type 1 & EN 12004 C1T with green pro certificate. The adhesive shall be sourced from an approved manufacturer with in-house production facilities and ISO certification. The adhesive to be mixed thoroughly and applied with a bed thickness ranging from 3 mm to 12 mm, evenly spread & combed using notched trowel and gently press using rubber mallet. Tiles shall be gently pressed into place using a rubber mallet, maintaining a uniform joint spacing as directed by engr-in-charge , followed by grouting using epoxy quartz technology-based grout to ensure a durable, stain-resistant, and aesthetically finished surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 72 | M&L for 1000x1000mm vetrified fllor tiles in floors etc. set and jointed over screed, plaster or RCC surface, using a cement based Polymer modified tile adhesive conforming to IS 15477:2019 type 1 & EN 12004 C1T with green pro certificate. The adhesive shall be sourced from an approved manufacturer with in-house production facilities and ISO certification. The adhesive to be mixed thoroughly and applied with a bed thickness ranging from 3 mm to 12 mm, evenly spread & combed using notched trowel and gently press using rubber mallet. Tiles shall be gently pressed into place using a rubber mallet, maintaining a uniform joint spacing as directed by engr-in-charge , followed by grouting using epoxy quartz technology-based grout to ensure a durable, stain-resistant, and aesthetically finished surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 73 | M&L for decorative digital design glazed coloured walls tiles of size 600x 1200mm for works on vertical surfaces or as skirting/dados of 1st quality over screed, plaster or RCC surface, using a cement based Polymer modified tile adhesive conforming to IS 15477:2019 type 1 & EN 12004 C1T with green pro certificate. The adhesive shall be sourced from an approved manufacturer with in-house production facilities and ISO certification. The adhesive to be mixed thoroughly and applied with a bed thickness ranging from 3 mm to 12 mm, evenly spread & combed using notched trowel and gently press using rubber mallet. Tiles shall be gently pressed into place using a rubber mallet, maintaining a uniform joint spacing as directed by engr-in-charge , followed by grouting using epoxy quartz technology-based grout to ensure a durable, stain-resistant, and aesthetically finished surface including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 74 | M&L for glazed wall tiles for size 600x300mm/ 450x300mm of approved colour and design in vertical surfaces including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 75 | S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make: Hindware Cat part No/ Jaquar Cat No Part WC OPS-WHT-15853S300UF/ Kohlar Cat Part No 77739T-SL-0/ Cera cat Part No A1014110 |
| 76 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, valveless syphonic action type PVC low level dual action flushing cistern with inlet ball valve float & handle incl plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern 1st quality complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 77 | S&F in repair, ABS body Health Faucet including flexible pipe of 15 mm bore and min 1.00M long with and including 15 mm bore complete all as specified and directed.Make: Jaquar Cat Part No ALD-CHR-573/ Hindware cat Part No F160192CP/ KOHLER Cat Part No 12927IN-CP/ CERA Cat Part No F8030107AB |
| 78 | S&F in repair brass chromium plated toilet paper holder fixed to wall with CP brass screw complete all as specified and directed.Make: Jaquar Cat Part No ACN-1151N/ Kohler Cat Part No 5633IN/ Hindware cat Part No F880003CP/ CERA Cat Part No F5002110 |
| 79 | S&F in repair wall/ floor mounted bath room vanity unit of overall size 600x450x450 (approx) with multiple cabins with outside openable one shutter made of water proof coating/ items/ with two nos of opening knob with hinges and auto closing and 16-18mm thick black polish granite complete all as specified and directed. |
| 80 | S&F in repair for Table Top white ceramic basin of approx Size: 50x40 cm table mounted type including cuplink with stainless steel bottle trap of 32mm size with 250mm long bottle trap and all fittings to proper functional condition complete all as specified and directed.Make: Jaquar Cat Part No JDS-WST-25911/ Hindware cat Part No 91238/ CERA Cat Part No S2020153/ Kohler Cat Part No K-31459IN-0 |
| 81 | S&F in repair vitreous china wash basin white oval type size 600 x 480 mm white in colour refix in counter platform of granite stone/RCC including provision of brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 82 | S&F in repair long body Brass Chrome Finish Single Lever Basin Mixer with 600mm Braided Connection Pipe complete all as specified and directed.Make: Cera cat Part No F2013452/ Hindware cat Part No F360012/ Jaquar cat Part No FLR-CHR-5005NB |
| 83 | S&F in repair 3 in 1 concealed single lever shower mixer, Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spout with 10 layer surface finished, Shower System owns a modern and stylish look, Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items all as specified by manufacture complete all as specified and directed.Make: Jaquar Cat Part No ORP-CHR-10125PM/ Hindware Cat Part No F570022CP/ KOHLER Cat Part No K-98754IN-4-CP/ CEARA cat Part No F1015403 |
| 84 | S&F in repair 5mm thick modern mirror of size 600x750mm fixed on decorative PVC cabinet with border design suitable for wash basin cabinet with fitted with LED Front and Backlight, Stepless Dimmable Wall Mirrors with Anti-Fog, Shatter-Proof, Memory, 3 Colors, Double LED Vanity Mirror with touch off/on switch in one mirror including all fixing arrangement complete all as specified and directed by Engg in charge. |
| 85 | S&F in repair Bib tab (spout) 15mm bore while with Wall Flange complete all as specified and directed.Make: Jaquar Cat Part No OPP-15037PM/ Hindware Cat Part No F340004CP/ KOHLER Cat Part No K-16093IN-4-CP CERA Cat Part No F1023151 |
| 86 | S&F in repairs Stop valves (angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.Make : Jaquar model OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat No 11568IN-7BCP, CERA CAT NO F1015201 |
| 87 | S&F in repair toughened corner glass shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed by Engr-in-charge.Make: Jaguar Cat Part No CAN-1173 or equivalent in Cera/ Hindware |
| 88 | S&F in repair fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed.Make: KOHLER Cat Part No K-25066IN-CP/ Jaquar Cat Part No ACN-CHR-1181S/ Hindware Cat Part No F580008CP/ CERA CAT Part No F5006101 Please Enable Macros to View BoQ information |
| 89 | S&F in repair fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed.Make: KOHLER Cat Part No K-25066IN-CP/ Jaquar Cat Part No ACN-CHR-1181S/ Hindware Cat Part No F580008CP/ CERA CAT Part No F5006101 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender