Tender For Repairs/ Replacement/ Renewal Of Plain Cement Concrete Floor, Wall, Tiling, Sanitary / Bath Fittings, Plaster, Platforms/ Shelves Etc And Allied Wks At Certain Otm Accns At Military Station Kanchrapara Under Ge Barrackpore
Tender Value
35 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/ Replacement/ Renewal Of Plain Cement Concrete Floor, Wall, Tiling, Sanitary / Bath Fittings, Plaster, Platforms/ Shelves Etc And Allied Wks At Certain Otm Accns At Military Station Kanchrapara Under Ge Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Cleaning vertical and horizontal surfaces of unflustered masonry wall and concrete surfaces for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) including curing treated surface for 24 hrs complete all as specified and as directed. |
| 2 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed. |
| 3 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed. |
| 4 | M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and as directed. |
| 5 | Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 6 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base/plinth protection complete all as specified and directed. |
| 7 | M&L for 40mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in floor, finished the surface even and smooth with using extra cement complete all as specified and as directed. |
| 8 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 9 | M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc. complete all as specified and as directed. |
| 10 | M & L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 11 | Use and waste formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings sun shade, chajja, floors, roofs, landings, balconies etc., n exc 200 mm thick (horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed. |
| 12 | (a) Demolition of old sunken surfaces complete and cleaning of all loose particles and apply cement slurry @ 3.00 kg / sqm on old surfaces by brushing.(b) Provide PCC 1: 1.5:3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement.(c) Rendering 10mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(d) Applying evenly a coat of blown type bitumen at the rate of 1.50Kg per Sqm and binding with clean dry sand @ 0.05Cum per Sqm(e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sides of sunken portion upto 600 mm height.(f) polythene film,150 micron thick laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm complete all as specified and directed.(g) Fill the sunken floor with PCC 1:5:10 type E-2 using brick aggregate.(h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall shall be provided to drain out seepage water if any.(j) Testing of sunken as per specification mentioned in SSR part-I/ P.S.(NOTE : CPVC pipe, WPC and PCC 1:5:10 measured and paid separately, Floor Area shall be measured for payment). |
| 13 | M&L for PCC 1:5:10 Type E-2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and as directed. |
| 14 | Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 15 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 16 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 17 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 18 | M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M & L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 3mm thick (average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all specified and as directed. |
| 21 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using Airless Paint Primer Sprayer using smart technique, on newly plastered surface of wall, cornices complete all as specified and as directed . |
| 22 | M & L for preparation of old plastered surfaces of wall and applying two coats of cement base paint using Airless Paint Primer Sprayer using smart technique complete all as specified and as directed. |
| 23 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 24 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 25 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm complete all as specified and as directed.Note : Rate shall be deemed to be include for cutting holes/demolition of masonry walls etc for taking down chowkhats and making good the damaged surfaces |
| 26 | S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 27 | S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 28 | S & F 100 mm size aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 butt hinges, complete all as specified and as directed. |
| 29 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S&F 150mm size aluminium handles, cast type, anodised complete all as specified and as directed. |
| 31 | S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 32 | S & F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead frosted glass and remaining portion to be louvered using 4 mm thick pinhead frosted glass and outer side louvered portion covered with aluminium expanded mosquito proof wire cloth 0.45 mm dia and average width of aperture 1.4 mm with necessary frame work, rubber gasket and aluminium beading complete all as specified and as directed.Note : Rates shall include all glazing/aluminium expanded wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc |
| 33 | S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed. |
| 34 | M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed. |
| 35 | S & F in repairs, Aluminium wire cloth, expanded mesh type, 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples, nails, screws, beads, etc in wooden/metal joinery as required complete all as specified and as directed. |
| 36 | S & F 3mm thick sheet glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old glass at a height upto G+3 complete all as specified and as directed. |
| 37 | S & F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old glass at a height upto G+3 complete all as specified and as directed. |
| 38 | S & F in repairs, 25mm dia heavy duty stainless steel curtain rod (SS-304), cut in required length and size to fit with opening including fixing in bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed. |
| 39 | S & F 125mm long curtain rod side brackets of stainless steel (SS 202), angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod including stainless steel (SS 202) decorative design plain metal colour nobs (oval/sphere shape) with fixing arrangement complete all as approved and shown by Engr-in-charge. |
| 40 | S & F 25mm thick solid PVC composite sheet, prelaminated on front side and plain matching dark shade laminated background as in Cubboard flush shutters, fixed with SS flush screws, necessary cutting for required shape, rebate, hinges, hooks, etc., fixing with self closing hinges, wall hanging hooks, magnetic locks, handles, etc including dismantling of old decay boarding of any description complete all as specified and as directed.Note :- For item No 40 & 41, Necessary Hinges, hooks, handles and locks shall be measured and paid separately as supply only. |
| 41 | S & F 18/19mm thick solid PVC composite sheet, prelaminated on front side and plain matching dark shade laminated background as in kitchen cabinet shutters, backing, sides, top/bottom, etc, fixed with SS flush screws, necessary cutting for required shape, rebate, hinges, hooks, etc., fixing with self closing hinges, wall hanging hooks, magnetic locks, handles, etc including dismantling of old decay boarding of any description complete all as specified and as directed. |
| 42 | Supply only heavy duty Slim Nickel plated Stainless steel magnetic catch (L shape) with strong magnet of size 11mm x 35mm x 4mm complete all as specified and as directed. |
| 43 | Supply only heavy duty stainless steel slip on hinges, self closing type with opening full overlay or 105°, suitable for 25mm thick shutter of maximum size 850mm x 550mm complete all as specified and as directed. |
| 44 | Supply only Ergonomically designed powder coated Aluminium anodised handle, suitable for 25mm thick shutter, size 10-15mm x 200mm complete all as specified and as directed. |
| 45 | Supply only Ergonomically designed powder coated Aluminium anodised handle, suitable for 18/19mm mm thick shutter, size 10-15mm x 100mm complete all as specified and as directed. |
| 46 | S & F 75mm size Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. |
| 47 | M & L for 25mm thick PCC 1:2:4, type B-1 using (20 mm graded crushed stone aggregate) as in floors to receive tiles complete all as specified and as directed. |
| 48 | M & L for coloured joint free non skid ceramic tiles (Matt finish), 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc. over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed. |
| 49 | M & L for coloured joint free non skid ceramic tiles (Matt finish), 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc. over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed. |
| 50 | M&L for coloured joint free non skid ceramic tiles (Matt finish) 7 to 8mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 51 | M&L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 52 | M&L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 53 | S&F for Vitrified Ceramic dark shade-coloured double charged tiles, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 54 | S&F for Vitrified Ceramic dark shade-coloured double charged tiles, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 55 | M&L for glazed light coloured/printed ceramic tiles 350x250x7mm /450x350x7mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 56 | Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed. |
| 57 | M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15 mm thick screed in cement mortar (1:6) including rubbing and polishing complete all as specified and as directed. |
| 58 | M&L for Machine cut Kota stone slab 20 to 25 mm thick in verticle surface such as riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10 mm thick rendering in CM (1:4) including rubbing and polishing complete all as specified and as directed. |
| 59 | S & F 22 to 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 15mm thick rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 60 | M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 10mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc., complete all as specified and asdirected. |
| 61 | M&L for 18 to 20 mm thick green marble work (table rubbed and polished) in urinal partition steps, jambs, pillars, window cills, cooking platform and the like including pointing in coloured cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work including rounding of exposed edges of marble over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 62 | Providing edge moulding to 18-20mm thick granite stone slab including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 63 | S and F Rotational molded PVC water storage tanks 500 litre capacity ( cylindrical vertical with closed top) hoisted and fixed in position fixed with ball brass valve of 20mm dia high pressure with polythene float and fly nut and 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or brass including dismantling of old PVC tank of any description complete all as specified and as directed. |
| 64 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed. |
| 65 | S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of old tubing complete all as specified and as directed. |
| 66 | S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of old tubing complete all as specified and as directed. |
| 67 | S & F GI tubing 25mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of old tubing complete all as specified and as directed. |
| 68 | S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 69 | S & F in repairs, 2 way bib taps Concealed type, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 70 | S&F in repairs, 15mm bore dia concealed stop valves/angular stop valve, cast copper alloy chromium plated, fancy type with long shank and cup screwed down high presure with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 71 | S & F in repairs, 2 way angle valve concealed type, 15mm dia cast copper alloy chromium plated, fancy type with long shank and cup screwed down high presure with crutch or butterfly handle screwed both ends (suitable size for 20mm outer dia CPVC pipe) complete all as specified and as directed. |
| 72 | S & F in repairs, Brass chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 73 | S&F in repairs, Brass CP Sink Mixer with movable neck, fixed to wall, for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, Teflon tape, etc complete all as specified and as directed. |
| 74 | S&F in repairs, tubular towel Rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed. |
| 75 | S & F in repairs, towel ring brass chromium plated complete all as specified and as directed. |
| 76 | S&F in repairs, glossy finish chromium plated ABS body shower rose, 175-180mm dia incl brass chromium plated 375mm long arm with flange, fixed to 20mm outer dia CPVC complete all as specified and as directed.Make : Prayag Cat No. BS-78 |
| 77 | S&F in repairs, Brass chromium plated glossy soap dish, oval dish shape, fixed with SS-304/brass screws complete all as specified and as directed.Make : Prayag SAGA ROUND Cat No. BA-45 |
| 78 | Supply and fix in repair Brass chromium plated glossy Toilet paper holder with spring cap, fixed with SS-304/brass screws complete all as specified and as directed.Make : Prayag SAGA Cat No. BA-08 |
| 79 | S&F in repairs, brass chromium plated bottle traps for wash basins with inlets and outlet screwed for pipe or connections including necessary packing union and cap and fixed complete all as specified and as directed. |
| 80 | S&F in repairs, 500mm x 125mm glossy finish brass chromium plated framed glass shelf and bracket with 5mm thick glass, fixed with SS-304/brass screws complete all as specified and as directed.Make : Prayag Cat No. BEA-45 |
| 81 | S&F in repairs, 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 82 | S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 20mm outer dia CPVC pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 83 | S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets and pillar tap, 15 mm bore, chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia 450mm long PVC connection pipe complete all as specified and as directed. |
| 84 | S&F in repairs, snow white table top wash basin size 600mmx400mmx160mm including brackets (with 32 mm waste coupling brass chromium plated suitable for wash hand basins, and PVC waste pipe) complete all as specified and as directed.Make CERA Cat No. S2020103 |
| 85 | S&F in repairs, vitreous China bowl, urinal flat back or corner wall type, size of 465X 355 X 265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, PVC connection pipe 15mm dia 450mm long, CP waste coupling 32mm (half or full thread) etc pointing around urinal back in cement etc. complete all as specified and directed. |
| 86 | S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed. |
| 87 | S&F in repairs, Vitreous China wash down water closet pan (pedestal pattern), white colour one piece EWCs with slim soft close seat cover and twin flush fitting including fixing bolts, flushing cistern and flush pipe) including connection to 'S & 'P'’ trap, and to flushing pipe, anti-siphonage pipe, etc complete all as specified and as directed.Make:- Cera Chanel of Cat No S1013210 and Seat Cover S1013227 |
| 88 | S & F in repairs, Vitreous China Squatting Pan\\"Orissa pattern\\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. |
| 89 | S & F in repairs, Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 90 | S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 450mm long etc complete all as specified and as directed. |
| 91 | S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipe of any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 92 | S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipe of any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender