Tender For Minor Repair Works At Community Hall At Bsnl Premises For Emri 108 Green Health Services At Bambolim-Goa.
Tender Value
19.82 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
0 days left
EMD
39656
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Minor Repair Works At Community Hall At Bsnl Premises For Emri 108 Green Health Services At Bambolim-Goa.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however only grass is met with the area will be measured and paid for under item 4001). |
| 2 | Removing white or colour wash by scrapping sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand) |
| 4 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 5 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. |
| 6 | Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer - in - charge;Above 1 Sq.m area |
| 7 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading danger lighting guarding as directed in :;All kinds of soil;All types of Ordinary rock including all types of laterite rock blasting prohibited;Hard rock where blasting prohibited |
| 8 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 9 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level |
| 10 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 11 | Centering & shuttering including Strutting Propping & removal of forms for :;Vertical surfaces such as retaing walls return walls Partitions walls (any thickness) including attached Pilasters Buttresses Plinth and string courses Fillets and the like |
| 12 | Centering & shuttering including Strutting Propping & removal of forms for :;Suspended floors roofs landings shelves & their supports |
| 13 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size);All works upto plinth level |
| 14 | Providing TMT steel reinforcement bars of (SAIL TATA. VIZAG JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 15 | 12mm cement plaster 1:4 (1 cement : 4 coarse sand) |
| 16 | Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. |
| 17 | Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 18 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.;Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 19 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 20 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 21 | UPVC ONLY DOOR FRAME:-;Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods. |
| 22 | 20 MM DOOR SHUTTER:-;Providing & fixing 20 mm door shutter Yashashri make or equivalent made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 23 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;Second class Indian teak wood |
| 24 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:;Second class Indian teak wood |
| 25 | Providing and and laying vitrified floor tiles in different sizes of Johnson Somany Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc. complete;600 x 600 mm light Shades |
| 26 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 27 | Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid |
| 28 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 29 | Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality shape & size complete with CP brass screws and washers Cleats CP studs etc Complete. |
| 30 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore. |
| 31 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 32 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 33 | Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 34 | Providing and fixing brass stop cock (heavy) of approved quality :;15 mm nominal bore |
| 35 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws;600 x 20 mm size |
| 36 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:;150 mm diameter. |
| 37 | Providing & fixing (4') 100 mm sand cast iron grating for gully floor or nahni trap. |
| 38 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;20 mm nominal bore |
| 39 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes. |
| 40 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door :;110 mm dia |
| 41 | Supplying of centrifugal pump of following capacity at the site of work including loading unloading excluding taxes i freight loading & etc. complete.;Three Phase Submersible Monoblock Pump Sets of SYNC spreed as 3000 RPM of 1.50 HP |
| 42 | Cleaning the surface and filling cracks (if any) applying epoxy putty wherever necessary Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 43 | Providing and Fixing in position of LOFT WATER TANK 5000 LTS SINTEX with necessary screws and accessories as per the direction of the Engineer Incharge. |
| 44 | Providing and fixing 10 litres pvc. Automatic flushing cistern with fittings. |
| 45 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :;All works upto plinth level |
| 46 | Floor polishing on masonry or concrete floors with superior quality wax polish of approved brand and manufacture. |
| 47 | Providing and fixing steel glazed doors windows and ventilators of standard rolled steel sections joints mitred and welded with 16 x 3.15 cm lugs 10 cm long embedded in cement concrete block 15cm x 10 cm size of 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws of raw plugs and screws for with fixing clamps or with bolts and nuts as required including providing and fixing of glass panes with glazing clips and special metal sash putty of approved made on metal beading with screws complete including applying a priming coat of red lead paint.;Steel door (Fixed doors) |
| 48 | Providing and fixing steel glazed doors windows and ventilators of standard rolled steel sections joints mitred and welded with 16 x 3.15 cm lugs 10 cm long embedded in cement concrete block 15cm x 10 cm size of 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws of raw plugs and screws for with fixing clamps or with bolts and nuts as required including providing and fixing of glass panes with glazing clips and special metal sash putty of approved made on metal beading with screws complete including applying a priming coat of red lead paint.;Fixed steel windows |
| 49 | Carrying of materials by mechanical transport including loading, unloading and stacking upto 10km(A) Lime, building rubbish, manure sludge, moorum excavated rock (i) Lime, moorum, building rubbish Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender