Tender For For Renovation / Construction Of Homestays In Suru Valley Kargil (Under Pmjuga)
Tender Value
80.88 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
810
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Renovation / Construction Of Homestays In Suru Valley Kargil (Under Pmjuga)
BOQ
| Sl. No. | Item Description |
| 1 | FOR RENOVATION OF MASHADI HOMESTAY AT TRESPONE: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 3 | White washing with lime to give an even shade : New work (three or more coats) |
| 4 | Satna lime wash on walls with one coat. |
| 5 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 6 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 7 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 9 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 10 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 11 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 12 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 13 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 14 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 15 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 16 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately). ALMERAH/CABINETS/counter desk as per site requiremen |
| 17 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 18 | FOR RENOVATION OF HOMESTAY OF SABIRI HOMESTAY AT TRESPONE: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 20 | White washing with lime to give an even shade : New work (three or more coats) |
| 21 | Satna lime wash on walls with one coat |
| 22 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 23 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 24 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 26 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 27 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 28 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 29 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 30 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 31 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 32 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 33 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately). ALMERAH/CABINETS/counter desk as per site requiremen |
| 34 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 35 | FOR RENOVATION OF HOMESTAY OF ABIDI HOMESTAY AT TRESPONE: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | White washing with lime to give an even shade : New work (three or more coats) |
| 37 | Satna lime wash on walls with one coat |
| 38 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 39 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 40 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 42 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 43 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 44 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 45 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 46 | Providing and fixing of 6mm ply, one side decorative of approved quality for door / frame panel as per site requirement. |
| 47 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 48 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 49 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 50 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately). ALMERAH/CABINETS/counter desk as per site requiremen |
| 51 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 52 | FOR RENOVATION OF HOMESTAY OF ALIS'S HOMESTAY AT TRESPONE: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 53 | White washing with lime to give an even shade : New work (three or more coats) |
| 54 | Satna lime wash on walls with one coat |
| 55 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 56 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 57 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 59 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 60 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 61 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 62 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 63 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 64 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 65 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately). ALMERAH/CABINETS/counter desk as per site requiremen |
| 66 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 67 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 68 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 69 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 70 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 71 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm > Alumunium Duct Clading 0.46mm to 0.71mm) |
| 72 | FOR RENOVATION OF HOMESTAY OF MANZOOR ALI HOMESTAY AT TRESPONE: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 73 | White washing with lime to give an even shade : New work (three or more coats) |
| 74 | Satna lime wash on walls with one coat |
| 75 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 76 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 77 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 78 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 79 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 80 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 81 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 82 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 83 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 84 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 85 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately). ALMERAH/CABINETS/counter desk as per site requiremen |
| 86 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 87 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 88 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 89 | FOR RENOVATION OF HOMESTAY OF ZGOPA HOMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 90 | White washing with lime to give an even shade : New work (three or more coats) |
| 91 | Satna lime wash on walls with one coat |
| 92 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 93 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 94 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 95 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 96 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 97 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 98 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 99 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 100 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cementmortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 101 | Electrification of the ROOM including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 102 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 103 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 104 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 105 | FOR RENOVATION OF HOMESTAY OF GAGSHAW HOMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 106 | White washing with lime to give an even shade : New work (three or more coats) |
| 107 | Satna lime wash on walls with one coat |
| 108 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 109 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 110 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 111 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 112 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 113 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 114 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 115 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 116 | 12mm thick cement paster of mix: 1:4 (1 cement :4 coarse sand) including carraige complete. |
| 117 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 118 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 119 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 120 | providing and fixing of Geyser 15 ltr of approved quaility |
| 121 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 122 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 123 | FOR RENOVATION OF HOMESTAY OF JAFFER HOMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 124 | White washing with lime to give an even shade : New work (three or more coats) |
| 125 | Satna lime wash on walls with one coat |
| 126 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 127 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 128 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 129 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 130 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 131 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 132 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 133 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 134 | 12mm thick cement paster of mix: 1:4 (1 cement :4 coarse sand) including carraige complete. |
| 135 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 136 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 137 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 138 | providing and fixing of Geyser 15 ltr of approved quaility |
| 139 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 140 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. ALMERAH/CABINETS/counter desk as per site requirement |
| 141 | FOR RENOVATION OF HOMESTAY OF HELBIC OMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 142 | White washing with lime to give an even shade : New work (three or more coats) |
| 143 | Satna lime wash on walls with one coat |
| 144 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 145 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 146 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 147 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 148 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 149 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 150 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 151 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 152 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 153 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 154 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 155 | providing and fixing of Geyser 15 ltr of approved quaility |
| 156 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction o fEngineer-in-charge (Note: Fittings to be paid separately). |
| 157 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 158 | FOR RENOVATION OF HOMESTAY OF APO RANJON PA OMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 159 | White washing with lime to give an even shade : New work (three or more coats) |
| 160 | Satna lime wash on walls with one coat |
| 161 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 162 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 163 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 164 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 165 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 166 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 167 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 168 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 169 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 170 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 171 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 172 | providing and fixing of Geyser 15 ltr of approved quaility |
| 173 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction o fEngineer-in-charge (Note: Fittings to be paid separately). |
| 174 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 175 | FOR RENOVATION OF HOMESTAY OF MALIK OMESTAY AT LANKERCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 176 | White washing with lime to give an even shade : New work (three or more coats) |
| 177 | Satna lime wash on walls with one coat |
| 178 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 179 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 180 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 181 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 182 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 183 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 184 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 185 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 186 | 12mm thick cement paster of mix: 1:4 (1 cement :4 coarse sand) including carraige complete. |
| 187 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 188 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 189 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 190 | providing and fixing of Geyser 15 ltr of approved quaility |
| 191 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 192 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 193 | FOR RENOVATION OF HOMESTAY OF ISSA PA OMESTAY AT THANGDUMBUR: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 194 | White washing with lime to give an even shade : New work (three or more coats) |
| 195 | Satna lime wash on walls with one coat |
| 196 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 197 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 198 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 199 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 200 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 201 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 202 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 203 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 204 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 205 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 206 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 207 | providing and fixing of Geyser 15 ltr of approved quaility |
| 208 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 209 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 210 | FOR RENOVATION OF HOMESTAY OF MOHD PA OMESTAY AT THANGDUMBUR: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 211 | White washing with lime to give an even shade : New work (three or more coats) |
| 212 | Satna lime wash on walls with one coat |
| 213 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 214 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 215 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 216 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 217 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 218 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 219 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 220 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 221 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 222 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 223 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 224 | providing and fixing of Geyser 15 ltr of approved quaility |
| 225 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 226 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 227 | Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\\",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge) |
| 228 | Providing and fixing of bathroom accessories like bibcock,faucet,cistern etc direction as per site engineer complete job |
| 229 | FOR RENOVATION OF HOMESTAY OF ZAKIR PA OMESTAY AT THANGDUMBUR: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 230 | White washing with lime to give an even shade : New work (three or more coats) |
| 231 | Satna lime wash on walls with one coat |
| 232 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 233 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 234 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 235 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 236 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 237 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 238 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 239 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 240 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 241 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 242 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 243 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 244 | FOR RENOVATION OF HOMESTAY OF ABDULI OMESTAY AT THANGDUMBUR: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 245 | White washing with lime to give an even shade : New work (three or more coats) |
| 246 | Satna lime wash on walls with one coat |
| 247 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 248 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 249 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 250 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 251 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 252 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 253 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 254 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 255 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 256 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 257 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 258 | providing and fixing of Geyser 15 ltr of approved quaility |
| 259 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 260 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 261 | FOR RENOVATION OF HOMESTAY OF HAIDARY HOMESTAY AT THANGDUMBUR: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 262 | White washing with lime to give an even shade : New work (three or more coats) |
| 263 | Satna lime wash on walls with one coat |
| 264 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 265 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 266 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 267 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 268 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 269 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 270 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 271 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 272 | Providing and fixing of 6mm ply, one side decorative of approved quality for door / frame panel as per site requirement. |
| 273 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 274 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 275 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 276 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 277 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 278 | FOR RENOVATION OF SASKHAN HOMESTAY AT KARTSEY KHAR: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 279 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 280 | White washing with lime to give an even shade : New work (three or more coats) |
| 281 | Satna lime wash on walls with one coat |
| 282 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 283 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 284 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 285 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 286 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 287 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 288 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 289 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 290 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 291 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 292 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 293 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 294 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 295 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 296 | Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\\",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge) |
| 297 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm > Alumunium Duct Clading 0.46mm to 0.71mm) |
| 298 | Providing and fixing of bathroom accessories like bibcock,faucet,cistern etc direction as per site engineer complete job |
| 299 | FOR RENOVATION OF WAZIR HOMESTAY AT KARTSEY KHAR:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 300 | White washing with lime to give an even shade : New work (three or more coats) |
| 301 | Satna lime wash on walls with one coat |
| 302 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 303 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 304 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 305 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 306 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 307 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 308 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 309 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 310 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 311 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 312 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 313 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 314 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 315 | FOR RENOVATION OF HAJI MOHD HOMESTAY AT KARTSEY KHAR:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 316 | White washing with lime to give an even shade : New work (three or more coats) |
| 317 | Satna lime wash on walls with one coat |
| 318 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 319 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 320 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 321 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 322 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 323 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 324 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 325 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 326 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 327 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 328 | FOR RENOVATION OF MOHD JAVID HOMESTAY AT KARTSEY KHAR: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 329 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 330 | White washing with lime to give an even shade : New work (three or more coats) |
| 331 | Satna lime wash on walls with one coat |
| 332 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 333 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 334 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 335 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 336 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 337 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 338 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 339 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 340 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 341 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 342 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 343 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 344 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 345 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 346 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm > Alumunium Duct Clading 0.46mm to 0.71mm) |
| 347 | FOR RENOVATION OF STEYANGONG HOMESTAY AT KARTSEY KHAR:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 348 | White washing with lime to give an even shade : New work (three or more coats) |
| 349 | Satna lime wash on walls with one coat |
| 350 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 351 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 352 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 353 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 354 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 355 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 356 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 357 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 358 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 359 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 360 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 361 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 362 | FOR RENOVATION OF MOHD ISSA HOMESTAY AT KARTSEY KHAR:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 363 | White washing with lime to give an even shade : New work (three or more coats) |
| 364 | Satna lime wash on walls with one coat |
| 365 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 366 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 367 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 368 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 369 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 370 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 371 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 372 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 373 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 374 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 375 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 376 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 377 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 378 | Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge,complete with; Budloo wood |
| 379 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm > Alumunium Duct Clading 0.46mm to 0.71mm) |
| 380 | FOR RENOVATION OF GOYAL BIBI HOMESTAY AT KARTSEY KHAR:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 381 | White washing with lime to give an even shade : New work (three or more coats) |
| 382 | Satna lime wash on walls with one coat |
| 383 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 384 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 385 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 386 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 387 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 388 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 389 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 390 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 391 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 392 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 393 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 394 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 395 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 396 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 397 | FOR RENOVATION OF HADI PA HOMESTAY AT PURTIKCHEY: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 398 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 399 | White washing with lime to give an even shade : New work (three or more coats) |
| 400 | Satna lime wash on walls with one coat |
| 401 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 402 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 403 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 404 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 405 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 406 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 407 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 408 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 409 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 410 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 411 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 412 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 413 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 414 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 415 | FOR RENOVATION OF ABDULPA HOMESTAY AT PURTIKCHEY: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 416 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 417 | White washing with lime to give an even shade : New work (three or more coats) |
| 418 | Satna lime wash on walls with one coat |
| 419 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 420 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 421 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 422 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 423 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 424 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 425 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 426 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 427 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 428 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 429 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 430 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 431 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 432 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 433 | FOR RENOVATION OF HUSSAINPA HOMESTAY AT PURTIKCHEY: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 434 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 435 | White washing with lime to give an even shade : New work (three or more coats) |
| 436 | Satna lime wash on walls with one coat |
| 437 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 438 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 439 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 440 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 441 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 442 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 443 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 444 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 445 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 446 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 447 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 448 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 449 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 450 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 451 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 452 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 453 | FOR RENOVATION OF JAVID HOMESTAY AT PURTIKCHEY: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 454 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 455 | White washing with lime to give an even shade : New work (three or more coats) |
| 456 | Satna lime wash on walls with one coat |
| 457 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 458 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 459 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 460 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 461 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 462 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 463 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 464 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 465 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 466 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 467 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 468 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 469 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 470 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 471 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 472 | FOR RENOVATION OF SYNTIC LA HOMESTAY AT TANGOLE: Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. @70% |
| 473 | Soft Rock @30% |
| 474 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 475 | Dumping stone excluding cost of stones. in Horizontal on level |
| 476 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Mut mat |
| 477 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 478 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 479 | Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar using approved quality mud with carriage of material complete. |
| 480 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 481 | Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job |
| 482 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;Local willow wood |
| 483 | Providing fixing Safeda ballies of 25mm diameter. |
| 484 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 485 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class Kail wood |
| 486 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood |
| 487 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm thick |
| 488 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 489 | 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 490 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 491 | White washing with lime to give an even shade : New work (three or more coats) |
| 492 | Satna lime wash on walls with one coat |
| 493 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 494 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 495 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 496 | Providing and fixing white vitreous china pedestal type Water closet (European type, wash down type). |
| 497 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps. |
| 498 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 499 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 500 | FOR RENOVATION OFMOHD PA HOMESTAY AT TANGOLE: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 501 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 502 | White washing with lime to give an even shade : New work (three or more coats) |
| 503 | Satna lime wash on walls with one coat |
| 504 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 505 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 506 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 507 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 508 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 509 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 510 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 511 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 512 | 12mm thick cement paster of mix: 1:4 (1 cement :4 coarse sand) including carraige complete. |
| 513 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 514 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 515 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 516 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 517 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 518 | FOR RENOVATION OF NUN KUN HOMESTAY AT TANGOLE: Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. @70% |
| 519 | Soft Rock @30% |
| 520 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 521 | Dumping stone excluding cost of stones. in Horizontal on level |
| 522 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Mut mat |
| 523 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 524 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 525 | Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar using approved quality mud with carriage of material complete. |
| 526 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 527 | Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job |
| 528 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;Local willow wood |
| 529 | Providing fixing Safeda ballies of 25mm diameter. |
| 530 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 531 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class Kail wood |
| 532 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood |
| 533 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm thick |
| 534 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 535 | 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 536 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 537 | White washing with lime to give an even shade : New work (three or more coats) |
| 538 | Satna lime wash on walls with one coat |
| 539 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 540 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 541 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 542 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 543 | Providing and fixing white vitreous china pedestal type Water closet (European type, wash down type). |
| 544 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps. |
| 545 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 546 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 547 | FOR RENOVATION OF SHAHI HOMESTAY AT TANGOLE: 20mm thick pure mud plaster constituents of mud itself act as binder (clay in mud) and aggregatte sand in mud) in case of claley soil or sandy soil, clay content of mud is preferably kept between 12% -3% by mixing Markaalk in prequired prop phukma strad to be added with linseed oil to water proof the surface and with cement to be added @5% and crusher dust 10% fine using good quality of earth |
| 548 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 549 | White washing with lime to give an even shade : New work (three or more coats) |
| 550 | Satna lime wash on walls with one coat |
| 551 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 552 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 553 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 554 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 555 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 556 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 557 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 558 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 559 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 560 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 561 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 562 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 563 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 564 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 565 | FOR RENOVATION OF IBEX HOMESTAY AT TANGOLE: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 566 | White washing with lime to give an even shade : New work (three or more coats) |
| 567 | Satna lime wash on walls with one coat |
| 568 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 569 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 570 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 571 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 572 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 573 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 574 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 575 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 576 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 577 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 578 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 579 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) |
| 580 | Electrification of the building including accessories complete include bulbs,sockets, heating/light/lan/MCBs/ etc direction as per site engineer. |
| 581 | FOR RENOVATION OF HIMALAYAN HOMESTAY AT TANGOLE: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 582 | White washing with lime to give an even shade : New work (three or more coats) |
| 583 | Satna lime wash on walls with one coat |
| 584 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 585 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 586 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 587 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 588 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 589 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 590 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 591 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate including carriage complete |
| 592 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 593 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 594 | FOR RENOVATION OF SINGAY HOMESTAY (NASRULLAH) AT LANKARCHEY: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 595 | White washing with lime to give an even shade : New work (three or more coats) |
| 596 | Satna lime wash on walls with one coat |
| 597 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 598 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 599 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 600 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 601 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood |
| 602 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 603 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 604 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows, clerestory windows 4mm thick glass panes |
| 605 | Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,Robina or any other approved brand as per specification approved by engineer In charge ) |
| 606 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 607 | S/F of wall lamp of approved quality which impart rich look and trendy style to the table, direction as per site engineer |
| 608 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 609 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providingandfixing auto closing hinges shall be paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender