Tender For Construction Of Public Toilet , Installation Of Street Light And Signage Board At Various Location Of Suru Valley Kargil (Under Pmjuga)
Tender Value
21.29 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
42580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Public Toilet , Installation Of Street Light And Signage Board At Various Location Of Suru Valley Kargil (Under Pmjuga)
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Local Public Toilet(Community infrastructure) for Tangole :Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. 70% |
| 2 | Ordinary rock@20% |
| 3 | Hard rock (blasting prohibited)@10% |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 70% |
| 5 | Ordinary rock@20% |
| 6 | Hard rock (blasting prohibited)@10% |
| 7 | Providing and laying of soling stone in the foundation, excluding cost of stone |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :all works upto P /level |
| 10 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar,using approved quality mud with carriage of material complete. |
| 12 | 15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand |
| 13 | Finishing the wall surface to make water proof by using/applying linseed oil two or more coat to make the surface water proof . |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class teak wood |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Ply wood 5 ply, 9 mm thickecorative plywood one side decorative veneer and commercial veneer on otherface (Type 1) conforming to IS 1328 BWR Type |
| 17 | Painting with synthetic enamel paint of approvedbrandandmanufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitable shadewith ordinary paint of approved brand and manufacture |
| 18 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 19 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaMetre bolts, nuts and wooden plugs and embedding in cement concrete each block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 20 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm |
| 21 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete 125 mm |
| 22 | Providing and fixing L drop os stain less steel of size 14 x 250 mm with stain finish including all items complete. |
| 23 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 24 | Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job |
| 25 | Safeda ballies 1Providing and fixing 25 mm diameter |
| 26 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 27 | Carriage of material from source to site, Cement by MT for avg 35 KM |
| 28 | Carriage of material from source to site, Sand / Agg. by MT for avg 10 KM |
| 29 | Carriage of material from source to site,Stone by MT for avg 10 KM |
| 30 | Carriage of material from source to site, Wood by MT for avg 35 KM |
| 31 | Construction of Local Public Toilet(Community infrastructure) for Lankerchey: Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. 80% |
| 32 | Ordinary rock@20% |
| 33 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 80% |
| 34 | Ordinary rock@20% |
| 35 | Providing and laying of soling stone in the foundation, excluding cost of stone. |
| 36 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 37 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :all works upto P /level |
| 38 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 39 | Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar,using approved quality mud with carriage of material complete. |
| 40 | 15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand |
| 41 | Finishing the wall surface to make water proof by using/applying linseed oil two or more coat to make the surface water proof . |
| 42 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood |
| 43 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class teak wood |
| 44 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Ply wood 5 ply, 9 mm thickecorative plywood one side decorative veneer and commercial veneer on otherface (Type 1) conforming to IS 1328 BWR Type |
| 45 | Painting with synthetic enamel paint of approvedbrandandmanufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitable shadewith ordinary paint of approved brand and manufacture |
| 46 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 47 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaMetre bolts, nuts and wooden plugs and embedding in cement concrete each block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 48 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm |
| 49 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete 125 mm |
| 50 | Providing and fixing L drop os stain less steel of size 14 x 250 mm with stain finish including all items complete. |
| 51 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 52 | Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job |
| 53 | Safeda ballies 1Providing and fixing 25 mm diameter |
| 54 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 55 | Carriage of material from source to site, Cement by MT for avg 15 KM |
| 56 | Carriage of material from source to site, Sand / Agg. by MT for avg 10 KM |
| 57 | Carriage of material from source to site,Stone by MT for avg 10 KM |
| 58 | Carriage of material from source to site, Wood by MT for avg 15 KM |
| 59 | Supply installation and commissioning of solar street light for Karchey Khar under PMJUGA: Providing, supplying, installing, testing and commissioning of standalone solar LED street-light system complete with 75 W SPV module, 12 W LED luminaire, minimum 12.8 V 30 Ah LiFePO₄ battery with BMS, MPPT charge controller, hot-dip galvanized steel pole of 5 m height above GL, module mounting frame, luminaire bracket, DC cable, protections, hardware and including GI pole 5 mtr all accessories complete |
| 60 | Earthwork in excavation by manual means in foundation trenches/drains in all kinds of soil, including dressing, ramming, getting out and disposal within 50 m lead and 1.5 m lift |
| 61 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 62 | Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete. |
| 63 | Supply installation and commissioning of solar street light for Thangduumbur under PMJUGA: Providing, supplying, installing, testing and commissioning of standalone solar LED street-light system complete with 75 W SPV module, 12 W LED luminaire, minimum 12.8 V 30 Ah LiFePO₄ battery with BMS, MPPT charge controller, hot-dip galvanized steel pole of 5 m height above GL, module mounting frame, luminaire bracket, DC cable, protections, hardware and including GI pole 5 mtr all accessories complete |
| 64 | Earthwork in excavation by manual means in foundation trenches/drains in all kinds of soil, including dressing, ramming, getting out and disposal within 50 m lead and 1.5 m lift |
| 65 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 66 | Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete. |
| 67 | Supply installation and commissioning of solar street light for Trespone under PMJUGA: Providing, supplying, installing, testing and commissioning of standalone solar LED street-light system complete with 75 W SPV module, 12 W LED luminaire, minimum 12.8 V 30 Ah LiFePO₄ battery with BMS, MPPT charge controller, hot-dip galvanized steel pole of 5 m height above GL, module mounting frame, luminaire bracket, DC cable, protections, hardware and including GI pole 5 mtr all accessories complete |
| 68 | Earthwork in excavation by manual means in foundation trenches/drains in all kinds of soil, including dressing, ramming, getting out and disposal within 50 m lead and 1.5 m lift |
| 69 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 70 | Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender