Tender For Special Repair And Paint Work Of Toe Wall, Ms Flat Railing, And Gate Of Sector 18, Chandigarh Under Landscaping.
Tender Value
20.28 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
40571
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Paint Work Of Toe Wall, Ms Flat Railing, And Gate Of Sector 18, Chandigarh Under Landscaping.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantlling of existing M.S. flat railig on brick masonary toe wall or on ground and removing of CC 1:2;4 block of size 1'-0\\"x0'-9\\"x1'-0\\" complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 2 | Refixing of old MS flat railing on brick masonary toe wall by providing CC 1:2:4 block of size 1'-0\\"x0-9\\"x1'-0\\" including cost of applying coat of synthetic enamel paint of approved brand complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge rate also includes credit of servicable bricks / Bats. In Cement mortar Based on DSR 15.7.4 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR : 6.1.1) |
| 5 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2) |
| 6 | Providing and fixing M.S flat gate having flat size 50 x12 mm having 6'-0\\" long of each openable shutter and 3'-3\\" high above ground level and ,1'-0\\" below ground level welded with 2 no's M.S flat 40 x10mm including horizontally at 6' upper and 6' from bottom and 10 no's M.S square bars of 45 degree angle at 6'' center to center between the 2 no's horizontally M.S flat 40 x 10mm including the 2 no's M.S. Channel 75x40mm in posts having 2no's channel welded to form post of size 75x80mm & 6'-0\\" long with lugs 1'-3\\" long 2no's M.S. Flat 40x10mm at bottom under each post to be provided on both sides of shutter with 2 no's hinges for openable arrangements with sliding bolt for locking arrangements and gate shall be properly embedded in cement concrete 1:2:4 be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfication of Engineer- in-Charge. |
| 7 | Providing and fixing M.S. flat railing having flat size 50x12mm,(2\\"x1/2\\") 4'-0\\" high(3' high above ground level) welded with 2no's M.S. flat 38x10mm horizontally at distancwe 9.5\\" upper and 9.5” from bottom and 1no's M.S. flat 25x10mm on the lower side of top M.S. flat including 8mm M.S. square bars of 45 degree angle at 6\\" center to center between the 2no's horizontally M.S. flat iron. The rates also includes the cost of 2 No. 12mm dia nut and bolts with 2no's M.S. pipe of 19mm dia and 3\\" long imbeded in ceme sleeve piece embedded in cement concrete 1:2:4 block of size 1'-0\\"x0'-9\\"x1'-0\\" and painted with three coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 8 | Providing and fixing M.S. flat railing having flat size 50x12mm having 6'-0\\" long and 2'-3\\" high above ground level and 1'-0\\" below ground level welded with 2no's M.S. flat 40x10mm horizontally at 6” upper and 6” from bottom and 10no's M.S. square bars of 45 degree angle at 6\\" center to center between the 2no's horizontally M.S. flat 40x10mm including the cost of 2no's 12mm dia nut and bolts with 2no's M.S. pipe of 19mm dia and 3\\" long sleeve piece. The bottom of vertical ounter M.S. flat 50x12mm shall be provided with 9\\" long anchorage piece of MS flat 50x12mm welded at bottom and railing shall be properly embedded in cement concrete 1:2:4 block of size 1'-0\\"x0'-9\\"x1'-0\\". The complete railing shall be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 9 | 15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1) |
| 10 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) Flush/ Ruled/ Struck or weathered pointing to the entire satisfaction of Engineer-in-Charge. (DSR 13.31.1) |
| 11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Engineer-in-Charge.( DSR 15.56) |
| 12 | Finishing walls with acrylic Smooth exterior paint of required shade:- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm. (DSR 13.46.1) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR 14.54.1) |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender