Tender For Repair Upgradation And Other Allied Works At House No. 1373 (Type-Vi) Sector-19, Chandigarh (Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
9.35 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
6 days left
EMD
18719
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Upgradation And Other Allied Works At House No. 1373 (Type-Vi) Sector-19, Chandigarh (Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, all depth including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. But not exceeding 300mm dia DSR 2.10.1.2 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plith level. DSR 4.1.3 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with F.P.S.bricks of class esignation 75 in superstructure above plinth level up to floor V level in all shapes and size in:as per DSR 6.4 |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR 6.4.2 |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7 |
| 9 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :DSR 17.3 |
| 11 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting Complete DSR 17.7 |
| 13 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 14 | Providing & Fixing of SS AISI 304 ( 18/8) Kitchen Sink as per IS 13983 with CI Brackets and SS Plug 40 mm including painting of fittings and brackets, cutting and making good the walls where ever required : DSR 17.10 |
| 15 | Kitchen sink without drain board DSR 17.10.2 |
| 16 | 610 x 460 mm bowl depth 200 mm: DSR 17.10.2.2 |
| 17 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR 17.16A |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28 |
| 19 | 32 mm dia DSR 17.28 2.1 |
| 20 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 21 | 100 mm dia DSR 17.35.1.2 |
| 22 | 75 mm dia DSR 17.35.2.2 |
| 23 | Providing and fixing HR bend of required degree : DSR 17.40 |
| 24 | 100 mm dia DSR 17.40.1.2 |
| 25 | Providing and fixing collar : DSR 17.57 |
| 26 | 100 mm dia DSR 17.57.1.2 |
| 27 | 75 mm dia DSR 17.57.2.2 |
| 28 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good : DSR No. 17.60 |
| 29 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 30 | Sand Cast Iron S&S as per IS- 3989 DSR 17.60.2.1 |
| 31 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81 |
| 32 | Providing for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10 |
| 33 | 15 mm dia. nominal bore as per DSR 18.10.1 |
| 34 | 20 mm dia. nominal bore as per DSR 18.10.2 |
| 35 | Supplying and fixing of Gun metal Peat Valve DSR: 18.17A |
| 36 | 20 mm dia. nominal bore: DSR 18.17.1A |
| 37 | 15 mm dia. nominal bore: NSR |
| 38 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 39 | 45 cm length DSR 18.21.2 |
| 40 | 15 mm nominal bore DSR 18.21.2.1 |
| 41 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 42 | 15 mm nominal bore DSR 18.46.2 |
| 43 | 20 mm nominal bore DSR 18.46.2 |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank : DSR 18.48 |
| 45 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49 |
| 46 | 15 mm nominal bore DSR 18.49.1 |
| 47 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 48 | 15 mm nominal bore DSR 18.51.1 |
| 49 | Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52 |
| 50 | 15 mm nominal bore. DSR 18.52.1 |
| 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53 |
| 52 | 15mm nominal bore DSR 18.53.1 |
| 53 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A |
| 54 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 55 | 20 mm nominal bore, DSR 18.62.2 |
| 56 | Cutting holes up to 30x30 cm in walls including making good the same: DSR No. 18.76 |
| 57 | With F.P.S. bricks DSR 18.76.1 |
| 58 | Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 59 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR 18.78 |
| 60 | Providing and fixing of GI Tank Nipple of size 20 mm dia of approved make. |
| 61 | Supplying and fixing of monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent model of approved make to the satisfaction of EIC |
| 62 | Providing and fixing Hydro Pneumatic Pump of size 0.5 HP Single Pump complete with Connecting Cable, NRV , having discharge 2000 LPH at 6 mtr head make Crompton Model MiniForce II or equivalent model of approved make to the satisfaction of EIC |
| 63 | Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD (Basin - 1022 & Pedestal 1121 ) or equivalent model of approved make to the satisfaction of EIC |
| 64 | P/F of C.P. Bib Cock with flange Make Jaquar Range Opal Model OPL-15037 or equivalent model of approved make to the satisfaction of EIC |
| 65 | Providing and fixing Angular Stop Cock Make Jaquar Range Opal Model OPL-15053 or equivalent model of approved make to the satisfaction of EIC |
| 66 | Providing and fixing of Single lever Basin Mixer without popup waste system with 450mm long braided hoses complete Make Jaquar Range Opal Model OPL-15011B or equivalent model of approved make to the satisfaction of EIC |
| 67 | Providing and fixing of Sink Mixer with Swiniging Casted Spout ( Wall Mounted Model ) with connecting legs and Wall Flanges complete make Jaquar range Continental Model FLR-5309N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 68 | Providing and fixing of C.P. Single lever Sink Cock with swinging spout on upper side (wall mounted model) with connecting legs and wall flanges Make Jaquar Range FLORENTINE FLR-5347N or equivalent model of approved make to the satisfaction of EIC |
| 69 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model FLR-5053N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 70 | Providing and fixing of Single 3-inlet Divertor Exposed Part kit & conceled Body Consisting of operating lever wall flange & Butten Assembly ,Make Jaquar Range Opal Model 15193K & Conceled part ALD-193 or equivalent makes in the same range of AOR to the satisfaction of EIC |
| 71 | Providing and fixing CP Brass Bath Spout with wall flange Jaquar make or equivalent model of approved make to the satisfaction of EIC |
| 72 | Providing & fixing of Overhead Shower 180 mm Make Jaquar Model 1759 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 73 | Providing and fixing Shower Arm 450 mm long make Jaquar Model SHA-479L450 or equivalent model of approved make to the satisfaction of EIC |
| 74 | Providing & fixing Hand Shower 100 mm Round Shape Single/Multi Flow Make Jaquar Model HSH-1937or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 75 | Providing and fixing Flexible tube for Hand Shower Make Jaquar Model SHA-549 or equivalent model of approved make to the satisfaction of EIC |
| 76 | Providing and fixing of Wall Bracket for Hand Shower make Jaquar or equivalent in the same range of AOR |
| 77 | Providing and fixing of Glass Shelf Corner Jaquar range Continental Model ACN-1171N or equivalent model of approved make to the satisfaction of EIC |
| 78 | Providing and fixing of Glass Shelf make Jaquar range Continental Model ACN-1173N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 79 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of approved make to the satisfaction of EIC |
| 80 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 81 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of approved make to the satisfaction of EIC |
| 82 | Providing and fixing of C.P. Towel Rack with lower hangers Make Jaquar - Continental Model ACN-1181S or equivalent model of approved make to the satisfaction of EIC |
| 83 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 84 | Providing and fixing of C.P. Steel Grating Heavy (With hole or without hole) 100 mm dia, of approved make. |
| 85 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 86 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 87 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 88 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 89 | Providing & fixing of C.P Cup heavy duty of approved make |
| 90 | Providing& Fixing of Drip Seal joints to sand cast iron/centrifugally cast (spun) iroof |
| 91 | 100mm |
| 92 | 75 mm |
| 93 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. |
| 94 | Providing and fixing of C.P. Nozzle Tap for Gardening |
| 95 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 96 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 97 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar or equivalent model of approved make to the satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender