Tender For Renovation Of Library On Turnkey Basis At Ff, Sf, Cri, Actrtec
Tender Value
2.75 Crore
Estimated cost
Bid Submission
10 Sep 2026
17 days left
EMD
5.51 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Library On Turnkey Basis At Ff, Sf, Cri, Actrtec
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL & INTERIOR WORKS |
| 2 | DISMANTLING WORKS |
| 3 | Appointment of reputed registered Archiect and Interior designer to prepare 3D views as per site requirement and existing approved 3D design, issue of GFC drawings with MEP inputs, selection of material, site visit min weekly once giving directions and instriuctions to all contractors/sub contractos and more as per requirment as and when work needs, attending offical meetings and briefing, market visit for selection of material complete as directed and instructed. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 6 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 9 | Removing existing Metal Compactors for induvidual block incluing its railing and accessories |
| 10 | Reinstalltion of above removed MS Compactors at required location including its accessories and addingg and damaged accessories to make it functional through expert agency complete as directerd and instructed |
| 11 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. In floor/dado |
| 13 | Same as above but in frame works Provinding & fixing frame tile using 3'x8' vitirfied tile as per drawing & details etc. complete Window & Door Frame |
| 14 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. |
| 15 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 16 | MASONARY WORK |
| 17 | Providing and laying autoclaved aerated Concrete (AAC) blocks masonry with 100mm / 125 mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 18 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | False Ceiling work. |
| 21 | P/f false ceiling on GI ,metal frame with 12 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. |
| 22 | Extra for providing and fixing ceiling to curved surfaces in narrow widths |
| 23 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels with ACP panel board of approved shade with necessarry aluminum framing with silicon joint filling |
| 24 | Painting Work |
| 25 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: |
| 26 | Providing & applying PU / Polishing the wooden surfaces as per design and details. |
| 27 | Providign & applying Synthetic enamel paint on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 28 | CARPENTRY WORK |
| 29 | Providing & fixing Both side Laminate finish Partition using 12mm thck commerical grade ply with laminate and aluminum hollow section frame of 50x50mm size (Basic rate-1200/sqft) as per design & detail complete. |
| 30 | Providing & fixing Glass Partition using 10 mm thk. Toughen Glass with profile alminum sections as per design & detail complete. |
| 31 | Providing & fixing Wall Paneling finish Partition using 12mm thick commerical grade ply with laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 32 | Providing & fixing Base for Mural wall Art using 12mm thick commerical grade ply with upto 18mm MDF finish as per design & detail complete. |
| 33 | Providing & fixing Base for Doodle wall Art using 12mm thick commerical grade ply with upto 18mm MDF finish as per design & detail complete. |
| 34 | Providing & fixing 14\\"/18\\" Deep Storage full height storage using commerical grade ply with internal & External laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 35 | Providing & fixing 14\\" Deep Storage Half height storage using commerical grade ply with External laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 36 | Providing & fixing Window & Door frame Paneling storage using commerical grade ply with External laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 37 | Providing & fixing Laminate finish Ply boxing work using commerical grade ply with External laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 38 | Providing & fixing Discussion wall panel board using commerical grade ply with External laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 39 | Providing & fixing seminar room Seating Area Boxing without Carpert using 35 mm thick commerical grade ply with MDF as per design & detail complete. |
| 40 | Providing & fixingseminar room wall paneling using commerical grade ply with MDF as per design & detail complete. |
| 41 | Providing & fixing seminar room Partition using commerical grade ply with MDF as per design & detail complete. |
| 42 | Providing & fixing Staircase trade & riser using Italian / marble of approved design with grooves. |
| 43 | Providing & fixing Wall Paneling finish Partition using 12mm thick commerical grade ply with laminate (Basic rate-1200/sqft) as per design & detail complete. |
| 44 | As Per design & detail, Budgtory cost considerd. |
| 45 | As Per design & detail, Budgtory cost considerd. |
| 46 | L shape Work station with modular alum low level partion with draer units, Power point raceway complete. |
| 47 | Work station with modular alum low level partion with draer units, Power point raceway complete. |
| 48 | Premuim quality designer Roller Blinds as per selection |
| 49 | MODULAR FURNITURE |
| 50 | Fully laminated Meeting room table on metal frame with |
| 51 | Reception Table-1 made out of commercial ply, lamnated finish, MDF detailing with corien stone top etc complete |
| 52 | As Per design & detail, Budgtory cost considerd. |
| 53 | Reception Table-2 made out of commercial ply, lamnated finish, MDF detailing with corien stone top etc with partion stone finish complete |
| 54 | Modular Work station with alu partition, metal drawer unit with power & LAN points. |
| 55 | DECORATIVE WORK |
| 56 | Doing Mural design on wall as per design and instructions |
| 57 | Doing Doodle Wall desigin on wall as per design, instruction and drawings |
| 58 | Providign & doing wooden flooring with necessarry eboxy base, as per reputed manufacturer specification and requrement/ |
| 59 | Doing Mural design on wall as per design and instructions along staricase side wall |
| 60 | Doing Doodle Wall desigin on wall as per design, instruction and drawings |
| 61 | Providing & fixing 4' wide flush door using Flush door finished with laminate, with standred hardware as per design & detail complete. |
| 62 | Providing & fixing 3' wide flush door using Flush door finished with laminate, with standred hardware as per design & detail complete. |
| 63 | Providing & fixing 2.5' wide flush door using Flush door finished with laminate, with standred hardware as per design & detail complete. |
| 64 | Providing & fixing 4' wide Glass door using 12 mm thk. Glass door on floor spring with standred hardware as per design & detail complete. |
| 65 | Signages - Branding, Door signage, Numbering etc |
| 66 | DESIGNER FURNITURES |
| 67 | Suppling & installing Sofa (3D design & Selection) |
| 68 | Suppling & installing island Sofa (3D design & Selection) |
| 69 | Suppling & installing Workpod (3D design & Selection) |
| 70 | Suppling & installing Chair (3D design & Selection) |
| 71 | Suppling & installing Discussion table (3D design & Selection) |
| 72 | Suppling & installing Touchscreen table(3D design & Selection) |
| 73 | Suppling & installing Ampitheare Seating(3D design & Selection) |
| 74 | POWER CABLES FOR DISTRIBUTION BOARD All works are SITC works |
| 75 | Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class |
| 76 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, XLPE insulated, PVC sheathed, FRLS, Copper/Aluminium conductor, 1.1 kV, IS 7098 3.5 core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 77 | SITC of cable gland 50sqmm double compression type including black PVC shroud on gland with earthing and all accessories |
| 78 | SITC of 50sqmm lugs aluminium type complete with crimping, hardware, insulation tape, ferrules and all necessary accessories, complete in all respects as directed by Engineer-in-Charge. |
| 79 | SITC of 25sqmm lug aluminium type complete with crimping, hardware, insulation tape, ferrules and all necessary accessories, complete in all respects as directed by Engineer-in-Charge. |
| 80 | SITC of 4c x 16 sqmm copper armoured cable 1100 volt FRLS , PVC Insulated XLPE insulated, PVC sheathed, FRLS, Copper/Aluminium conductor, 1.1 kV, IS 7098 |
| 81 | Providing, supplying, installing and commissioning of suitable size cable gland for 4 c x 16 sq.mm cable, made of brass/aluminium double compression as required, complete with lock nut, washers, earth tag, PVC shroud and all necessary accessories |
| 82 | EARTHING |
| 83 | SITC of Hot Dipped GI Earth Plate Electrode 600 x 600 x 6.3 mm earth station 2.5 mtr below the ground level --- Same as above-- as per drawing & specifications complete with all required materials like coke/charcoal, salts , brass nut bolts & washers, watering arrangement, GU pipe 25 mm pipe (B class) concrete/brick chamber, heavy duty cast iron cover plate & excavation in ground, refilling & removing of excess earth within a radius of 500 mtr.etc. scope also includes dewatering, shoring, & consolidation etc. |
| 84 | SITC of GI Strip 25 mm × 3 mm for earthing system, manufactured from hot-dip galvanized mild steel conforming to IS 2629/IS 4759, including supply, laying, fixing on wall/ceiling/cable tray/supports using suitable GI saddles, spacers, clamps, bolts, nuts, washers and all necessary fixing accessories, making joints by bolting/welding, applying zinc-rich paint on welded portions, connection to earth electrodes/equipment, testing for continuity, and commissioning, complete as required. |
| 85 | SITC of GI Wire 8 SWG (One Run) for earthing system, made of hot-dip galvanized mild steel conforming to relevant IS standards, including supply, laying, stretching, fixing on insulators/supports or along structures as required, complete with GI saddles, clamps, nuts, bolts, washers and all fixing accessories, making necessary joints and terminations, testing for continuity, and commissioning, complete in all respects as required. |
| 86 | 12 WAY DISTRIBUTION BOARD |
| 87 | Supply, Installation, Testing & Commissioning (SITC) of 12-Way TPN Distribution Board (36 Poles)Supply, installation, testing and commissioning of Triple Pole and Neutral Distribution Board (TPNDB) suitable for SP/TP MCBs, comprising 12 ways (36 poles), fabricated from 1.2 mm thick CRCA sheet steel, powder-coated after seven-tank treatment, complete with hinged and lockable door, suitable for surface/flush mounting, having minimum IP43 degree of protection, mounted on suitable MS/GI frame with vertical busbar arrangement, complete with tinned electrolytic copper phase busbars, neutral link, earth bar, DIN rails, removable gland plates, knockouts, interconnections, hardware, danger notice, engraved circuit identification labels, earthing terminals, and all fixing accessories.The DB shall be complete with all internal wiring, termination, testing and commissioning, conforming to relevant IS/IEC standards and for Electrical Works, including , complete in all respects and as directed by the Engineer-in-Charge. |
| 88 | Providing & erecting 4 Pole MCB, 415V, up to 63A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel. |
| 89 | Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 90 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 91 | Supplying and fixing Cable End Box (Loose Wire Box)suitable for following single pole and neutral, sheetsteel, MCB distribution board, 240 Volts, on surface/recess, complete with testing and commissioning etc.as required. |
| 92 | 14 WAY 2+10Way |
| 93 | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 94 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 95 | 3c x 6 sqmm copper armoured cable |
| 96 | VTPN Distribution board |
| 97 | Supply, installation, testing and commissioning of 415 V, 50 Hz, Vertical Type Triple Pole and Neutral (VTPN) MCB Distribution Board, fabricated from 1.6 mm thick CRCA sheet steel, dust and vermin proof, suitable for surface/recess mounting, powder coated after seven-tank treatment, complete with hinged and lockable door, shrouded electrolytic tinned copper busbars of adequate current rating, common neutral link, earth bar, DIN rails, removable gland plates, cable alleys, interconnections, danger notice, engraved circuit identification labels, and all necessary fixing accessories. with provision of Incoming 160 amps 4Pole 16 KA MCCB and Outgoing , 63 A TPN MCB Qty 04 Nos and 40 A TPN MCB Qty 04 Nos , 03 Nos 40 A DP MCB interconnection between incomer MCCB and bus bars as required and outgoing MCB . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 98 | Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 99 | SITC of DP MCB Enclosure box Metal type IP 67 with waterproof PVC Glands |
| 100 | CABLING FOR LIGHTING |
| 101 | SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including heavy-duty HMS grade rigid PVC conduit bends , and all fixing accessories ( Rate for one mtr circuit i.e. 3 x 2.5sqmm wire) for power points |
| 102 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable including surface/ recessed heavy-duty HMS grade rigid PVC conduit asrequired. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS |
| 103 | LIGHTING |
| 104 | LED Panel light decorative design type . (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Panel light offollowing body material and construction as per IS : 10322 with driver as perthe requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuitprotection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified GlareRating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver& electrical circuitry), of minimum 50000 Burning Hours with, 70% of initialLumen maintained till life ends as per LM80 extrapolation IES TM-21-11report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As perANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximumpower consumption should not more than the specified rating and Fixtureshall be of relevant BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. complete in all respect i/c connections with 1.5 sq mm FRLS,PVC insulated copper conductor single core cable and earthing etc. asrequired . System lumen efficacy ≥105<120 lm/Watt output . LM79 & LM80 Test report from NABL lab for alltesting required for LED fixtures as per BIS shall be submitted. Shape sizeand CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LEDjunction temperature shall not rise above 90°C). |
| 105 | CRCA Sheet Body 36 watt Surface mounted / concealled mounted Linear light / square light with with required CRCA BOX and supporting GI pipe for below ceiling fixing 1.5 Mtr |
| 106 | LED Down lighter (Cylindrical COB Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures WordMark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt outputLM79 & LM80 Test report from NABL lab for all testing required forLED fixtures as per BIS shall be submitted. Shape size and CCT shall be asapproved by Engineer-in-Charge as per requirement. (Thermalmanagement: heat sink of aluminum housing such that LED junctiontemperature shall not rise above 90°C) |
| 107 | 22 watt Cylindrical Supply, Installation, Testing & Commissioning (SITC) of decorative LED Track Light fitting complete with aluminium housing, integrated COB LED, high efficiency electronic driver, adjustable mounting arrangement, track adapter ceiling mounting system, and all required accessories suitable for operation on 230V AC supply The track lighting system to be installed below 1.5 Mtr using suitable metallic suspension rods/cables with necessary fasteners, anchor bolts, clamps, and fixing arrangement as directed by Engineer-in-Charge. |
| 108 | 18watt surface / concealed CRCA / Aluminium body light fixture external driver of required capacity light ceiling fixing using approved design and finish complete with clamps, and all accessories required for complete installation as approved by Engineer-in-Charge. |
| 109 | Supply, Installation, Testing & Commissioning (SITC) of 8W LED Spot Light fitting complete with high efficiency COB LED, pressure die-cast aluminium housing, electronic driver, mounting arrangement, connector, and all accessories required for complete installation suitable for operation on 230V AC supply as directed by Engineer-in-Charge. |
| 110 | Supply, installation, testing and commissioning of Designer LED Chandelier of approved design, size, finish and wattage, suitable for operation on 230 V AC, 50 Hz, complete with high-efficiency LED light source/lamps, integrated electronic driver(s), decorative metal frame with crystal, acrylic or glass elements including fixing arangement for adjustable sttel wires / chains , brackets etc. |
| 111 | Decorative Pendent Light 40 Watt complete with high-efficiency LED module, integrated electronic constant-current driver, decorative housing made of aluminium/CRCA sheet/metal with po complete with high-efficiency LED module, integrated electronic constant-current driver, decorative housing made of aluminium/CRCA sheet/metal with powder-coated finish, acrylic/PMMA/polycarbonate diffuserwder-coated finish, acrylic/PMMA/polycarbonate diffuser |
| 112 | Providing, supplying, installing, testing and commissioning of flexible LED strip light of approved make, suitable for indoor decorative lighting application, complete with high brightness SMD LEDs, aluminium profile/channel with diffuser, connectors, accessories, and mounting arrangement, as required. The LED strip shall operate on 12V/24V DC supply, having minimum 60 LEDs per meter, complete in all respects as directed by Engineer-in-Charge. |
| 113 | Providing, supplying, installing, testing and commissioning of electronic LED driver suitable for LED strip lighting, having input supply of 230V AC and output voltage of 12V/24V DC as required, complete with overload, short circuit and surge protection, suitable mounting arrangement, necessary connections and accessories, complete in all respects as directed by Engineer-in-Charge. |
| 114 | Supplying and fixing following size/surface / concealled fixing modules, PVC / GI box alongwith modular base & cover plate for modular switches in surface or recess etc. as required. • All the power socket tagging to be provided , PVC tags to be provided.• All the power sockets inside and power panel inside wiring ferruling to be done as instructed by EIC ES |
| 115 | 3 Module |
| 116 | 6 Module |
| 117 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required. |
| 118 | Modular switch 6A/16A |
| 119 | Modular Socket 6A/16A |
| 120 | Point wiring |
| 121 | SITC of Primary point wiring for light point/ fan point/ exhaust fan point/ call bell point with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including PVC conduit Heavy(HMS) / casing capping , with modular switch , modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Average circuit lenght 20 mtr) |
| 122 | SITC Secondary point wiring light to light looping with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including PVC conduit Heavy(HMS) / casing capping , with modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. ( Average circuit length 10 Mtr ) |
| 123 | SITC Providing, supplying, installing, testing and commissioning of telephone caller ID unit with keypad, LCD display, speakerphone facility, redial, memory function, incoming call display and all standard features, complete with handset, line cord, power adaptor/battery, mounting/accessories and necessary connections, complete in all respects as directed by Engineer-in-Charge. |
| 124 | Brush Less Direct Current (BLDC) Fan with regulator operated Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos.canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 125 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 126 | CCTV system / Telephone |
| 127 | SITC of 5 MP IR Vandal Dome Camera with(2mm to 4mm at lower end) & (9mm to 15mm at higher end) auto focus motorized optical zoom vandal proof metal body , 1/2.8” or better PoE Support, NAS Storage, SD Card(256GB or better ) Support, In-built MicrophoneTrue WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming andCyber Security Features: STQC Certified including all required fixing accessories , and as per technical specificatons mentioned in tender documents |
| 128 | SITC of 32 Channel NVR with 4K Support as per technical specifications , 32 IP Channel Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm I/O , 4 SATA HDD Support (12TB Capacity per Slot, Hard Disk Not Included) including video management software for client PC and as per technical specifications mentione din tender documents. |
| 129 | SITC of 256 GB SD card for camera |
| 130 | SITC of 10TB or higher Sata Enterprise Hard disk , surveillance grade for Recording as per technical specifications mentioned in tender |
| 131 | SITC of fully loaded RJ-45 24 port Patch Panel with tool-less keystone jacks having the compliance / Certifications for ISO 9001:2015 & ROHS |
| 132 | SITC of 24 Port 10/100/1000 Gigabyte PoE Network Switch , 24 Nos RJ 45 ,10/100/1000 PoE+ ports and 4 combo ports (RJ-45 interface and SFP port ) , power cords and mounting accessories and equivalent to technical specification mentioned in tender documents. |
| 133 | SITC of IT rack -19\\" Wall mounted rack 15U(double section) 600 x 600 mm with acrylic glass door with the accessories -[Two Fan position tray with two 90 CFM fans(AC 230V),3 Horizontal cable manager- 3nos, AC power panel strip with 5 X 5 AMP /15Amp sockets ,fuse and on/off switch, 1 packet mounting hardware. |
| 134 | Supplying and fixing (rack dressing) 2 meter length, UTP Patch cord of Cat 6 type in position having the compliance / Certifications for ISO 9001:2015 & ROHS. |
| 135 | SITC of CAT-6 cable through casing-capping, PVC conduit for camera to switch connectivity. Cat6 cable series consists of 100- Ohm impedance, 4-pair UTP cables for horizontal installations in local area networks (LANs). All cables meet and exceed Category 6/Class E requirements in TIA 568-C.2, and ISO/IEC11801. These cables are UL Listed and UL & ETL verified. |
| 136 | SITC of PVC Conduit pipe 32mm surface / concealled fixing for Cat 6 cable laying Supply, Installation, Testing and Commissioning (SITC) of 32 mm dia heavy-duty rigid PVC conduit (ISI marked) for laying of CAT 6 UTP cables, including all necessary accessories such as bends, couplers, junction boxes, inspection boxes, saddles, spacer bars, adaptors, bushes, draw wire, screws, rawl plugs, clamps, supports, cutting, threading (where required), chasing in walls/slabs or surface mounting, making good the damaged surfaces, and all incidental works, complete as per approved drawings, BOQ and technical specifications. |
| 137 | SITC of Accessories & Connecotrs RJ45 & DC Pins Pair |
| 138 | SITC of PVC Box 4 x 4 weather proof for camera IP 67 |
| 139 | SITC of HDMI cable 10MTr |
| 140 | Online UPS - Input supply: Single Phase, OutputSupply: Single Phase. Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS)system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall beMicroprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both forthe rectifier & inverter with PWM (Pulse WidthModulation) Technology. The quality of design,manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ totaldemand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall beincluded in UPS cost), extreme power factor kit to beinclude to limit the input pf to 0.99 and output powerfactor shall be unity (i.e. kw rating of the UPS shallbe kva rating x 1 ) however UPS shall be suitable totake load at 0.7 laging to 0.7 leading power factorloads. UPS shall be suitable for incoming supplyAC single phase 160-270V 50 Hz and deliveringoutput AC supply true sine wave single phase220/230/240 Volt, 50 Hz +/- 0.2Hz, Overloadcapacity of 120% for 10 mins and 150% for 1minute. Operating temperature 0 to 40 0C, Relativehumidity 0-95% non condensing, noise level lessthan 60db at 1 meter distance, Protection for Undervoltage, over voltage, abnormal output voltage,battery over charging, output over current, short circuit, battery deep discharge , 10 KV surge.Display for watt/VA,Amp and Voltage powerparameters etc. UPS shall comply with low voltageelectromagnetic compatibility (EMC) achieved asper EN 6204, EN6204 Part I and Part 2, it shall be aVoltage and Frequency Independent (VFI) type UPS(as per standard IEC 62040-1, 2 & 3) . The UPSshould be with IGBT Based Inverter Technology,Communication RS232/ RS485/ SNMP port openprotocol for BMS integration as per approved byEngineering in charge. Required battery racks, DCbreaker of suitable rating and interconnectingcopper conductor cable of suitable size andconnectors and all required accessories areinclusive in the cost. The UPS should have QRcode which should contain drawing, test report OEMmanual, Geo- Tag of manufacturing location etc |
| 141 | SITC of 2 KVA UPS including external batteries racks , interlinks and all fixing accessories |
| 142 | SITC of 55\\" LED 4K UHD smart LED TV with VGA input , 2HDMI port with Wallmount Stand , with remote and other accessories as per site installation and as directed by OIC-EIC Resolution: 4K Ultra HD (3840x2160) | Refresh Rate: 60 hertzConnectivity: Wi-Fi (Built-in) | 3 HDMI portse | 1 USB ports to connect hard drives and other USB devices | eARC | Bluetooth 5.0 | Optical | EthernetSound: 20 Watts Output | 2.0 Ch Speaker | AI Sound (Virtual Surround 5.1 up-mix) | Auto Volume Levelling | Bluetooth Surround ReadySmart TV Features: AI ThinQ & WebOS 22 with User Profiles α5 Gen5 AI Processor 4K | Display: 4K Ultra HD LED Display | 4K Upscaler | AI Brightness Control |
| 143 | Configuration and integration charges for New CCTV system, and installation of software in work station. Providing View at Security. |
| 144 | SITC of PC workstation: Intel Core i7 14th Gen Processor16 GB Ram, 512 GB SSD + 1 TB Seagate SATA HDD2 GB Graphic Card, Wired Keyboard & Mouse23.8” or more Monitor, 2 Port Serial Card, 1 Port Parallel CardWindows 11 Pro Preloaded, 1 Yrs Warranty by OEM as per technical specifications mentioned in Tender. |
| 145 | IT networking work detail specification to be submitted by IT department |
| 146 | SITC of IT rack -19\\" Wall mounted rack 15U(double section) 600 x 600 mm with acrylic glass door with the accessories -[Two Fan position tray with two 90 CFM fans(AC 230V),3 Horizontal cable manager- 3nos, AC power panel strip with 5 X 5 AMP /15Amp sockets ,fuse and on/off switch, 1 packet mounting hardware. |
| 147 | SITC of fully loaded RJ-45 24 port Patch Panel with tool-less keystone jacks having the compliance / Certifications for ISO 9001:2015 & ROHS |
| 148 | Supplying and fixing (rack dressing) 0.5 meter length, UTP Patch cord of Cat 6 type in position having the compliance / Certifications for ISO 9001:2015 & ROHS. |
| 149 | Supplying and fixing (rack dressing) 2 meter length, UTP Patch cord of Cat 6 type in position having the compliance / Certifications for ISO 9001:2015 & ROHS. |
| 150 | SITC of CAT-6 cable through casing-capping, PVC conduit for camera to switch connectivity. Cat6 cable series consists of 100- Ohm impedance, 4-pair UTP cables for horizontal installations in local area networks (LANs). All cables meet and exceed Category 6/Class E requirements in TIA 568-C.2, and ISO/IEC11801. These cables are UL Listed and UL & ETL verified. |
| 151 | SITC of PVC Conduit pipe 32mm surface / concealled fixing for Cat 6 cable laying Supply, Installation, Testing and Commissioning (SITC) of 32 mm dia heavy-duty rigid PVC conduit (ISI marked) for laying of CAT 6 UTP cables, including all necessary accessories such as bends, couplers, junction boxes, inspection boxes, saddles, spacer bars, adaptors, bushes, draw wire, screws, rawl plugs, clamps, supports, cutting, threading (where required), chasing in walls/slabs or surface mounting, making good the damaged surfaces, and all incidental works, complete as per approved drawings, BOQ and technical specifications. |
| 152 | SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS |
| 153 | Supplying and drawing following core Multi mode OS 3 Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 μm with HDPE jacket, LSZH(Low smoke Zero Halogen), Tight-buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at850 nm, > 500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568- C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall be Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793- 1/60794-1-2, ITU-T-REC G.652D and Telecordia GR- 20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature should be – 5 0C to +50 0C, Maximum Attenuation ± 3.5 dB/km atOperational Wavelength 850 nm and ± 1.5 dB / km at Operational Wavelength 1300 nm . type of fiber should be 50/125 / G.652D & Refractive Index shouldbe 1.483/1.478, The value for Mode-filed,Cladding Diameter 50 ± 2.5 μm and 125 ± 1μm correspondingly i/c splicing & marking etc complete as required. fiber multi mode 6 core armoured with OTDR testing |
| 154 | Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splicesand terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spoolsbuilt-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber 277 DELHI SCHEDULE OF RATES (E&M)-2025 per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. liu 12 port LC LC OM3 Lazrspeed 12 port fully loaded fibre tray LC type (LIU), including adaptors, pigtails, splice protectors, etc. for the terminations of 12 port laser-optimized 50/125µm multimode fiber (OM3), with suitable required accessories / Cords having the compliance/certifications for ISO 9001:2015 & ROHS. |
| 155 | lc lc patch cord multi mode Supplying and fixing Patch Cord of Optical Fiber MultiMode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 μm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Workingambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required. |
| 156 | fiber core splicing |
| 157 | HVAC BOQ |
| 158 | Chilled water Fan Coil Unit |
| 159 | Supply, Installation, Testing and Commissioning of chilled water Fan Coil Unit(One way Cassette Type / 4- way Cassete types / Hi Wall/ Fan Coil Unit- Ceiling) complete with G.I. casing, with Side/bottom return Air Plenum (5mm PE insulation) or as per site requirement For Hi Wall Units the Casing has to be as per OEM(ABS casing) , Filter box with 8mm Nylon Filter, 3 Row Deep cooling coil with coper tube diameter is 9.52 mm and thickness 0.33 mm with hydrophilic Aluminium fins. Complete coil must be designed for standard working pressure is 1.6 MPa(16bar) and the test pressure is 3.3MPa(33bar). Unit to be provided with SS drain pan with 7mm PE insulation and +200 mm extended. Direct driven fan (three speed) motor, operated on 230 volts, single phase, 50Hz, AC supply. Unit to be provided with Wireless remote. It shall also have RS485 Modbus communication function for BMS control. ESP for the Fan Coil Unit be 80 Pa Minimum( In case of 3 Tr, 4 Tr and 5 Tr) or Else Specified. Units need to BIS/Euro vent Certified.The unit included with Infrared Remote Control,micro-controller, drain pump & necessary supporting arrangement with ready made Valve Station with tray complete with set of butterfly Valves / Ball valves , PIBCV, with and without strainer ball valve. The entire skid shall be coated with Zinc-chromate primer coating and then painted with enamel paint. Price should be included for Electrical cable connection from MCB/Isolator to Cassette unit shall be done by HVAC contractor. Pipe line require from the main header also to be considered. no additional cost given for the same. Minimum Capacity should be as follows: |
| 160 | Each Unit to be provided with Cordless Remote with Temperature display. It has to based on microprocessor operations which can realize intelligent control of room temperature. It shall also have RS485 Modbus communication function or BACnet for BMS control. |
| 161 | 3 TR (1200CFM) One Way Chilled water cassette unit |
| 162 | 2 TR (800CFM) 4Way Chilled water cassette unit |
| 163 | 1.5 TR (600CFM) 4Way Chilled water cassette unit |
| 164 | 1.0 TR (400CFM) 4Way Chilled water cassette unit |
| 165 | 1.5 TR (600CFM) Decorative Hi wall unit |
| 166 | SITC of Centralized Controller System for Chilled Water Cassette Type FCUs -Supply, Installation, Testing & Commissioning of microprocessor based centralized controller system for chilled water cassette type FCUs complete with central controller having LCD/touch screen display, RS-485 communication network, digital programmable room thermostats with temperature sensor & 3-speed fan control, two-way motorized chilled water control valves with actuators, communication modules, control wiring, shielded communication cables, PVC/MS conduits, power supply arrangement and all accessories required for proper operation of HVAC system.The controller shall be suitable for centralized monitoring & control of minimum 32 FCUs with ON/OFF control, temperature setting, fan speed selection, scheduling, alarm indication and BMS integration through BACnet/Modbus protocol. The system shall maintain adjustable room temperature between 18°C to 30°C automatically through thermostat and motorized chilled water valve operation.The complete system shall be tested & commissioned including functional testing, communication testing, valve operation and temperature calibration, complete as per technical specification and as directed by Engineer-in-Charge. |
| 167 | Supply, laying, testing & commissioning of shielded twisted pair FRLS communication cable suitable for RS-485 BACnet/Modbus communication network for centralized controller system of chilled water cassette type FCUs, complete with necessary termination, ferruling, dressing, PVC/MS conduit/tray routing, accessories and connections as required.Cable shall be minimum 2 Core x 1.5 Sq.mm copper conductor,(or Communication cable shall be used as per requirement of centralized controller system) shielded twisted pair type, suitable for reliable communication between centralized controller and FCUs, complete as required and as directed by Engineer-in-Charge. |
| 168 | Design,Supplying, laying, fixing, testing and commissioning of following nominal sizes of insulated chilled water piping inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with minimum 36 kg/cum, 90% minimum closed cell content, minimum compressive strength of 2.7 kg/cm2 and initial thermal conductivity of 0.02 W/mK. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation and aluminium clading as specified/approved. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams. |
| 169 | Note:-The Pipes of sizes 150mm & below shall beM.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum6.35mm thick M.S. Sheet for pipes upto Note:- Pipe line inside the room area should have proper cable tray with cover/PVC casing caping as per instructed as directed by OIC-ES price should be included for the same. All pipe line Inside the room require Nitrile Rubber insulation with GC cloth of appropriate size. |
| 170 | 80 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 171 | 65 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 172 | 50 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 173 | 40 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 174 | 32 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 175 | 25 mm with 36 mm PUF thickness and 26 GaugeAI Cladding |
| 176 | SITC PVC drain pipe having pressure holding of 6kg/cm2. Drain piping complete with all accessories with 12mm Nitrile Rubber Insulation |
| 177 | 25 mm Dia. |
| 178 | 32 mm Dia. |
| 179 | 40 mm Dia. |
| 180 | INSULATED VALVES |
| 181 | FULLY LUGGED BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & 0- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified |
| 182 | 80 mm dia |
| 183 | 65 mm dia |
| 184 | 50 mm dia |
| 185 | BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.( INSULATED) Balancing valve vendor shall certify the site installation and shall be responsible to bring digital manometer to the site and commission and balance all the manual balancing valves as per the approved chilled water SLD. |
| 186 | 80mm dia. |
| 187 | 65mm dia. |
| 188 | 50mm dia. |
| 189 | AUTO AIR VENT WITH BALL VALVE |
| 190 | 25 mm Dia |
| 191 | Removal, safe dismantling, and shifting of existing 11 TR Air Cooled Ducted Package Air Conditioner unit (IDU + ODU) to new location as per engineer’s instructions, including disconnection of electrical, refrigerant, and duct connections, safe handling, temporary storage, and compliance with safety standards. |
| 192 | Refixing, installation, and commissioning of 11 TR Air Cooled Ducted Package Air Conditioner unit (IDU + ODU) at the new location as per engineer’s instructions, including mounting, leveling, alignment, connection of ducting, electrical and control wiring, refrigerant piping, charging with eco-friendly refrigerant (R-410A / R-407C), vibration isolation, testing, and compliance with safety standards. |
| 193 | Supply , Installation, Testing & commissioning of Hard drawn copper tube complete with all accessories and support between indoor & outdoor units RMT indicated is for set of piping (Liquid+ Gas) between indoor and outdoor machine, (individual piping will not be measured]. Piping should be laid in GI tray with proper clamping. Note:- Package unit piping should have UV paint protecting from weather condition & 19 mm nitrile rubber insulation with GC cloth. |
| 194 | copper piping equivivalent to the Package Unit system. |
| 195 | Supply, laying & termination of copper cable from Departmental power supply to IDU & between IDU and ODU unit. Complete with lug fitting, ferruling, gland fitting etc. All Cable should be laid in GI tray. |
| 196 | copper cable for Package units |
| 197 | Dismantling, removal, and shifting of existing GI ducts ( approximately 2000 sqmtr ducting) including all branches, grills, dampers, fire dampers, diffusers, VCDs, flexible canvas connections, plenums, and related accessories from the site to the scrap yard as per engineer’s instructions, including careful handling, temporary storage, and compliance with safety standards. |
| 198 | Dismantling, removal, of existing chilled water pipe with including puf insulation,aluminum cladding all branches, valves all related accessories from the site to shifting the scrap yard as per engineer’s instructions, including careful handling, temporary storage, and compliance with safety standards. |
| 199 | Dismantling and safe removal of existing 2 TR Chilled Water Hi-Wall FCU unit including chilled water piping, insulation, drain piping, control wiring, supports and accessories, complete with shifting of dismantled material to designated location and making good of dismantled area as per site conditions and instructions of Engineer-in-Charge. |
| 200 | Reinstallation, testing and commissioning of existing 2 TR Chilled Water Hi-Wall FCU unit including fixing of unit, alignment, electrical reconnection, drain piping connection, valve connection, testing and balancing complete with necessary supports, clamps and accessories as required as per site conditions and instructions of Engineer-in-Charge. |
| 201 | Supply, installation, testing and commissioning of copper chilled water piping suitable for 2 TR FCU unit comprising supply and return lines with 19 mm thick nitrile rubber insulation, fittings, elbows, brazing, supports, clamps and accessories complete as required.Pipe Size : 3/4\\" NB Copper Pipe (Supply & Return) or equivent of UnitInsulation : 19 mm thick nitrile rubber insulation |
| 202 | Dismantling and safe removal of existing 2 TR Split Air Conditioner unit including indoor unit, outdoor unit, existing copper refrigerant piping, drain piping, control wiring, supports and accessories, complete with recovery of refrigerant gas, shifting of material to designated location and making good of dismantled area as per site conditions and instructions of Engineer-in-Charge |
| 203 | Re-installation, testing and commissioning of existing 2 TR Split Air Conditioner unit including fixing of indoor & outdoor units, electrical reconnection, drain piping connection, refrigerant gas charging, testing, trial run and commissioning complete with necessary supports, clamps and accessories as required as per site conditions and instructions of Engineer-in-Charge. |
| 204 | Supply, installation, testing and commissioning of insulated copper refrigerant piping for 2 TR Split Air Conditioner unit comprising liquid line and suction line with nitrile rubber insulation, fittings, brazing, clamping, sleeves, supports and accessories complete as required.Liquid Line : 1/4\\" OD Copper Pipe or as requireSuction Line : 1/2\\" OD Copper Pipe or as require |
| 205 | SITC of Elelctrical cable require for installtion of Split Units as reuired. |
| 206 | MEP Consultancy – Design Stage: Preparation of conceptual, schematic, and detailed design drawings; preparation of specifications, schedules, and vetting the BOQs; coordination with architectural and structural designs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender