Tender For Providing Service Connection, Internal Electrification To Newly Constructed 250 Lph Ro Plant Room Near Wet Canteen At Bsf C Us, Yelahanka Under Stc Bsf Bengaluru.
Tender Value
45367
Estimated cost
Bid Submission
01 Sep 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Service Connection, Internal Electrification To Newly Constructed 250 Lph Ro Plant Room Near Wet Canteen At Bsf C Us, Yelahanka Under Stc Bsf Bengaluru.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.(i) Group C |
| 2 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).Supplying, Installation, Testing & Commissioning ofLED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumptionshould not more than the specified rating andFixture shall be of relevant BIS standard.Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management:heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminiumBody (Thickness > 1.20 mm)(i) 18- 22 Watt . Crompton/ Havells/Bajaj make |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i) 2 X 25 sq. mm (22mm) |
| 4 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 5 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 6 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 7 | (ii) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 8 | Supplying and fixing following way, single pole andneutral, sheet steel, MCB distribution board, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (i) 6 way , Double door . Indoa asian make/ Havells/ /Legrand make |
| 9 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i)Single pole. Indoasian make/ Havells/ /Legrand make |
| 10 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i) 40 A. Indoasian make/ Havells/ /Legrand make |
| 11 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 12 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part IIcomplete with fitting and cutting, jointing etc. in the existing trench, complete as required.(i)63 mm dia (OD-63 mm & ID-51 mm nominal) .Astral/Mangalam/APL Apollo Pipes (or) ISI make |
| 13 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Anchor/ Havells/Bajaj make(i) 5/6 A switch |
| 14 | (ii) 3 pin 5/6 A socket outlet |
| 15 | (iii) 15/16 A switch |
| 16 | (iv) 6 pin 15/16 A socket outlet |
| 17 | Supplying and fixing following PVC surface box with plate on existing modular metal boxes etc. as required. Anchor/ Havells/Bajaj make(i) 3 Module |
| 18 | (ii) 6 Module |
| 19 | Supplying and Laying of XLPE power cable of 1.1 KV grade UG electric cable with aluminium conductor of size 2X25 sq.mm direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. KEI/Polycab/Havells make |
| 20 | Supplying and Laying of XLPE power cable of 1.1 KV grade UG electric cable with aluminium conductor of size 2x25 sq.mm.in the existing RCC/HUME/METAL pipe as requiired. KEI/Polycab/Havells make |
| 21 | Supplying and Laying of XLPE power cable of 1.1 KV grade UG electric cable with aluminium conductor of size 2x25 sq.mm.in the existing masonry open duct as requiired.KEI/Polycab/Havells make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender