Tender For special repair Z.P.Central School Building@ Dharmpuri Tal- Malshiras Dist- Solapur
Tender Value
9.83 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair Z.P.Central School Building@ Dharmpuri Tal- Malshiras Dist- Solapur
BOQ
| Sl. No. | Item Description |
| 1 | A) S.R. Z.P.Central School Building:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means. SSR Page No./Item No. 153/720/21.01/BDA1 Spec. No. Bd.A.1 Page No.259 |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means.SSR Page No./Item No. 153/724/21.05/BDA2 Spec. No. Bd.A.2 Page No.259 |
| 3 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete.SSR Page No./Item No. 157/752/21.38/BDA12 Spec. No. Bd.A.12 Page No.264 |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Page No./Item No. 175/827/24.01/BDE 1 Spec. No. Bd. E. 1 Page No. 287 |
| 5 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR Page No./Item No. 197/889/27.01/BDG 1 Spec.No. Bd.G.1 Page No. 313 |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.SSR Page No./Item No. 157/750/21.36/BDA 10 Spec. No.Bd.A.10, Page No. 262 |
| 7 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR Page No./Item No. 157/751/21.37/BDA 11 Spec. No.Bd.A.11, Page No. 263 |
| 8 | Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.SSR Page No./Item No. 213/992/33.05/BDM3A Spec. No.Bd.M.3 Page One Number 380 |
| 9 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris up to a distance of 50metres or spreading in the compound and cleaning the site etc. complete.SSR Page No./Item No. 211/984/32.33/BDL Spec.No. As directed by Engineer in charge |
| 10 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. SSR Page No./Item No. 209/959/32.05/BDL 2B Spec. No.Bd.L.2, Page No. 368 |
| 11 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. Complete.SSR Page No./Item No. 210/966/32.15/BDL 10 Spec. No.Bd.L.10, Page No. 370 |
| 12 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in allpositions including scaffolding and curing etc. complete.SSR Page No./Item No. 209/962/32.08/BDL 4B Spec. No.Bd.L.4, Page No. 368 |
| 13 | Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curingetc.complete. SSR Page No./Item No. 209/956/32.02/BDL 1 Spec. No.Bd.L.1, Page No. 367 |
| 14 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. SSR Page No./Item No. 212/985/32.34/BDL Spec. No.As Directed By Engineer Incharge. |
| 15 | Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary,preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required etc. complete. SSR Page No./Item No. 225/1090/35.21/BDO 8E As directed by Engineer in charge. |
| 16 | Providing and applying plastic emulsion paint of approved quality,colour and shade to old and new surfaces in two coats including scaffolding,preparing the surface.(excluding the primer coat)etc. complete.SSR Page No./Item No. 227/1107/36.12/BDP 6 Spec. No.Bd.P.6 Page One Number 414 |
| 17 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil,grease,dirt and other materials as required, etc. complete.SSR Page No./Item No. 225/1093/35.24/BDO As directed by Engineer in charge. |
| 18 | Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.SSR Page No./Item No. 210/972/32.21/BDO 8E As directed by Engineer in charge. |
| 19 | Providing and applying two coats of flat oil paint of approved colour and shade to internal/external plastered surfaces including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete.SSR Page No./Item No. 224/1082/35.12/BDO7A Spec. No.Bd.0.7 Page One Number 406 |
| 20 | Providing and laying machine cut machine polished Polish shahbad stone slabs 20 to 25mm thick for treads and risers of steps and staircases,with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float,filling joints with neat cement slurry,curing, polishing and cleaning etc. complete.SSR Page No./Item No. 214/1004/33.17/BDM22 Spec. No.Bd.M.22 Page No.390 |
| 21 | Providing and fixing mild steel grill railing weighing 15 Kilogram/One Square Metre.with PVC handrail cover and newel post for stair cases,including fabricating,fixtures,drilling holes in concrete/other surface,erecting the grillwork,necessary welding,fixing by nuts and bolts,fixing PVC handrail cover,with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade,remaking the damaged surface,cleaning, etc. complete.Spec. One Number : As directed by Engineer in charge. |
| 22 | Providing structural steel work in hollow section of various thickness and sizes in square,rectanular and round shape from 25mm to 450mm section as per IS4923 YST 310 Grade produced from iron or eand blast furnace route etc.as per detailed designs and drawing or as directed including cutting,fabricating,hoisting,erecting,fixing in position, making riveted/bolted/ welded connections and painting complete.SSR Page No./Item No. 174/826/13.12/ Spec. One Number As directed byEngineer in Charge. |
| 23 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade.SSR Page No./Item No. 64/295/6.47/IRC-67 2012 Spec. No.IRC-67 2012 |
| 24 | Test Of Concrete -Compressive Strength OF C.C.M10,M20 Cube (Set of 3 cubes). |
| 25 | Royalty Charges Other Material |
| 26 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender