Tender For Repair/Renovation Of Cartridge Pit At Proof Range At Afk
Tender Value
41.76 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
83540
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Cartridge Pit At Proof Range At Afk
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 2 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 4 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article. |
| 5 | Excavating over areas, n exc 1.5m deep and getting out hard/ dense soil. |
| 6 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/ dense soil. |
| 7 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft rock. |
| 8 | Exacation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out hard rock by using pneumatic concrete breakers, chisels and wedges etc. |
| 9 | M&L for murum filling in pavings, laid in layers n. exc 15cm thick. Spread, levelled and rommed including watering. |
| 10 | M&L for providing cement concrete type I (M-15) 1:2:4 mix (20mm graded aggregate) in foundations, filling and mass concrete fair finished.with necessary centering |
| 11 | M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) 20mm graded aggregate in Foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete etc complete. |
| 12 | M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) 20mm graded aggregate Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses |
| 13 | M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) 1:1.5:3 mix (20mm graded aggregate) in Columns,Pillars,piers,posts and struts etc. |
| 14 | M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) 1:1.5:3 mix (20mm graded aggregate) in beams,cantilevers,lintels over 1.5m span. |
| 15 | M&L for providing formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter rough finished surface of concrete flat. |
| 16 | M&L for providing formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surface of concrete flat. |
| 17 | M&L for providing formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanctions for rough finished surface of concrete flat. |
| 18 | M&L for providing formwork to sides and soffits of beams, lintels, etc for rough finished surface of concrete flat. |
| 19 | M&L for deformed or twisted bars 10mm Dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 20 | M&L for Firebrick work in linings to fire places, flues, etc. (other than in chimney shafts), set, jointed and pointed in fireclay. |
| 21 | M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:6, complete |
| 22 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the surface even and smooth without using extra cement |
| 23 | Finishing cement concrete surface even and smooth using extra cement. |
| 24 | S&F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws. |
| 25 | M&L Mild steel of grade Fe-410-W (Gde-E-250) quality A for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 26 | S&F Mild steel of grade Fe-410-W (Gde-E-250) quality A for MS Plates/ sheets (plain or chequered) channels, square cut or notched with riveted, bolted or welded attachment |
| 27 | Fabrication and erection fixing only of Mild steel of grade Fe-410-W for MS Plates/ sheets (plain or chequered) channels, square cut or notched with riveted, bolted or welded attachment. |
| 28 | M&L Mild steel of grade Fe-410-W (Gde-E-250) quality A for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc |
| 29 | S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 22.5cm and n exc 30cm or more length and diameter of neck 16 to 20mm. |
| 30 | S&F Mild steel of grade Fe-410-W (Gde-E-250) quality A for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete. |
| 31 | M&L for Reinforced concrete drain pipe (for sewer and drains) of class NP2, laid and jointed complete with collors, including testing drains as specified by filling the pipes with water to a head of 1.5m at the highest point including tempararily fixing of bends, etc as required. Bore of pipe 150 mm |
| 32 | M&L for providing concrete bed to drain pipes including forming cradles; in cement concrete 1:3:6: type C2 Bore of pipe 150 mm |
| 33 | M&L for preparing plastered or unplastered new surfaces and applying two coats of cement paint on walls. |
| 34 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 35 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25cm. Soft/loose soil |
| 36 | Removing surplus excavated soil/rock and demolished material to a distance exc 500m but n exc 1.5 KM and depositing where directed. |
| 37 | Credit Item-Dismantled mild steel member, wrought iron (of any description) obtained from dismantling. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender