Tender For Repair/ Maintenance Of Point Wiring, Modular Fittings And Fixture, External Lighting Including Lt Cable, Lt Panel Pole Box And Other Misc Connected E/M Works At Cgda Hq And Centrad Complex Under Ge (East) Delhi Cantt-10
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
19 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Point Wiring, Modular Fittings And Fixture, External Lighting Including Lt Cable, Lt Panel Pole Box And Other Misc Connected E/M Works At Cgda Hq And Centrad Complex Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power, submain etc) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed. |
| 2 | M&L for point wiring concealed type for Modular fitting with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box,modular white cover plate with frame, blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match theexisting for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. |
| 3 | Description all as per item No. 2.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed. |
| 4 | Description all as per item No. 2.00 here in before but for one light point controlled by two Nos, two way switches complete all as specified and as directed. |
| 5 | Description all as per item No. 2.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed. |
| 6 | Description all as per item No. 2.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed. |
| 7 | S&F in replacement modular cover plate made of durable, UV-stabilized, impact-resistant, and flame-retardant polycarbonate material complete with matching inner mounting frame (grid) of approved make, suitable for housing modular switches, sockets and fan regulators including inner frame shall be securely fixed to the existing metal/plastic flush-mounted wall box using corrosion-resistant screws, and the front cover plate shall feature a secure, clip-on, screwless mechanism to ensure a completely flush and clean finish, including all necessary connections and alignment as directed. |
| 8 | Description all as per item No 7.00 but for 1 or 2 module cover plate with frame. |
| 9 | Description all as per item No 7.00 but for 3 module cover plate with frame. |
| 10 | Description all as per item No 7.00 but for 4 module cover plate with frame. |
| 11 | Description all as per item No 7.00 but for 6 module cover plate with frame. |
| 12 | Description all as per item No 7.00 but for 8 module cover plate with frame. |
| 13 | Description all as per item No 7.00 but for 12 module cover plate with frame. |
| 14 | Description all as per item No 7.00 but for 16 module cover plate with frame. |
| 15 | Supply and fix in replcement of heavy-duty, factory-fabricated Galvanized Iron (GI) flush-mounted modular wall box of approved make, minimum 18 SWG (Standard Wire Gauge) thickness, complete with earth terminals and knockouts for conduit entry, The above work shall be embedded flush in the wall/ceiling using cement mortar (1:3), aligned perfectly plumb, and finished smooth to receive the modular mounting frame and cover plate, including all necessary civil cutting, chasing, and making good the surface as directed. |
| 16 | Description all as per item No 8.00 but for 1 or 2 module. |
| 17 | Description all as per item No 8.00 but for 3 module. |
| 18 | Description all as per item No 8.00 but for 4 module. |
| 19 | Description all as per item No 8.00 but for 6 module. |
| 20 | Description all as per item No 8.00 but for 8 module. |
| 21 | Description all as per item No 8.00 but for 12 module. |
| 22 | Description all as per item No 8.00 but for 16 module. |
| 23 | Supply and Fix in replcement modular switches of approved current rating, 240V AC, 50Hz, single-pole, 1-way, 2-way and bell push type of IndoAsian make , conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 24 | Description all as per item No 9.00 but modular switch, 1 way, 6 Amp, 1 Module, complete. |
| 25 | Description all as per item No 9.00 but modular switch, 2 way, 6 Amp, 1 Module, complete. |
| 26 | Description all as per item No 9.00 but modular switch, 1 way, 16 Amp, 1 Module, complete. |
| 27 | Description all as per item No 9.00 but modular bell push, 6 Amp, 1 Module complete. |
| 28 | Supply and Fix in replacement modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type of IndoAsian make, conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 29 | Description all as per item No 10.00 but modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete. |
| 30 | Description all as per item No 10.00 but modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete. |
| 31 | S&F in replacement 2-Module, of approved current rating, 240V AC, 50Hz, Step-Type Modular Fan Regulator IndoAsian make, complete with a rotary knob for hum-free speed control, stepped regulation, and matching cover plate, securely mounted in the existing modular switchboard matrix including all necessary internal wiring and connections as per site requirements |
| 32 | Supply and Fix in replacement modular switches of approved current rating, 240V AC, 50Hz, single-pole, 1-way, 2-way or Bell push type of Anchor Roma make , conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 33 | Description all as per item No 12.00 but modular switch, 1 way, 6 Amp, 1 Module, complete. |
| 34 | Description all as per item No 12.00 but modular switch, 2 way, 6 Amp, 1 Module, complete. |
| 35 | Description all as per item No 12.00 but modular switch, 1 way, 16 Amp, 1 Module, complete. |
| 36 | Description all as per item No 12.00 but modular bell push, 6 Amp, 1 Module complete. |
| 37 | Supply and Fix in replacement modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type of Anchor Roma make , conforming to IS:3854 duly manufactured from high-grade, impact-resistant, and flame-retardant UV-stabilized polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker design with click-fit mounting complete all as specified and as directed. |
| 38 | Description all as per item No 13.00 but modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete. |
| 39 | Description all as per item No 13.00 but modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete. |
| 40 | S&F in replacement 2-Module, of approved current rating, 240V AC, 50Hz, Step-Type Modular Fan Regulator Anchor Roma make (Roma Classic / Roma Urban series), complete with a rotary knob for hum-free speed control, stepped regulation, and matching cover plate, securely mounted in the existing modular switchboard matrix including all necessary internal wiring and connections as per site requirements. |
| 41 | Supply and Fix in replacement non-modular switch of approved current rating (6A/16A), 240V AC, 50Hz, single pole, one-way, Bell push or two-way type duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression with ergonomic rocker/piano design, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards, complete all as specified and as directed. |
| 42 | Description all as per item No 15.00 but for piano type 1 way, 6 Amp, 1 Module, complete. |
| 43 | Description all as per item No 15.00 but for piano type 1 way, 16 Amp, 1 Module, complete. |
| 44 | Description all as per item No 15.00 but for piano type bell push 1 way, 16 Amp, 1 Module, complete. |
| 45 | Supply and Fix in replacement non-modular socket outlet of approved current rating, 240V AC, 50Hz, single or multi type, duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with silver-alloy contacts for high electrical endurance and arc suppression, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards complete all as specified and as directed. |
| 46 | Description all as per item No 16.00 Socket outlet, 16/6 Amp, 3/5 Pin, combined complete. |
| 47 | Description all as per item No 16.00 Socket outlet, 6 Amp, 2/3 Pin, combined complete. |
| 48 | Supply and Fix in replacement non-modular fan regulator of approved rating, 240V AC, 50Hz, hum-free step-type duly manufactured from high-grade, impact-resistant, and flame-retardant urea-formaldehyde / polycarbonate material with high-quality internal electronic components for energy efficiency and smooth speed control, designed for traditional screw-fixing mounting on existing or new sunmica/wooden/metal switchboards, complete all as specified and as directed |
| 49 | Supply and fix in replacement of Slim LED Batten 40 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV. Total system Lumen of 20W Led should be 2000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 50 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV. Total system Lumen of 10W Led should be 1000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra)>80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 51 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2'X2', 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 52 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2'X2', 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Warm White (3000K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 53 | S&F in replacement Surface mounting type, 15 Watt Aesthetically designed 1'x1' LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTO1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS. |
| 54 | S&F in replacement Surface mounting type, 42 Watt Aesthetically designed 2'x2' LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 36W, LED shall be 4000 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTONEO2X2PLR42WLED857S or equivalent Model of Makes Mentioned in PS. |
| 55 | S&F in replacement Surface mounting type, 36 Watt Aesthetically designed 1'x4' LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 36W, LED shall be 3800 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - PLUTONEO4X1PLR36WLED857S or equivalent Model of Makes Mentioned in PS. |
| 56 | Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 06 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output of 6500 K /3000 K as required at site complete all as specified and as directed. |
| 57 | Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 9-12 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output of 6500 K /3000 K as required at site complete all as specified and as directed. |
| 58 | Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 15 to 18 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output of 6500 K /3000 K as required at site complete all as specified and as directed. |
| 59 | Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 20 to 22 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output of 6500 K /3000 K as required at site complete all as specified and as directed. |
| 60 | S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 61 | S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 62 | S&F in repair load line, distribution board, double door type, TPN, vertical, 12 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 63 | S & F in repair for distribution board double door type, SPN, 16 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 64 | S & F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 65 | S & F in repair for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 66 | S&F in replacement sub main wiring with 2 runs of FRLSH single core, PVC insulated & unsheathed cable of required size, 1100 Volts grade, with multi stranded copper conductor, drawn through concealed/surface PVC rigid, non-metallic conduit, medium grade, as per relevant IS codes, complete with all necessary conduit fittings and one run of required size PVC insulated copper conductor as earth continuity wire, complete all as specified and as directed. Note:- Two run of conductor as phase and neutral and one run of conductor of same size as earth wire complete shall be measure as one RM. |
| 67 | Description all as per item No. 35.00 but for 4.0 sqmm FRLSH copper conductor submain complete. |
| 68 | Description all as per item No. 35.00 but for 6.0 sqmm FRLSH copper conductor submain complete. |
| 69 | Description all as per item No. 35.00 but for 10.0 sqmm FRLSH copper conductor submain complete. |
| 70 | Supply and fix 3-core, PVC insulated, FRLSH (Flame Retardant Low Smoke Halogen) PVC sheathed, unarmored copper conductor cable of under mentioned size, for 1100V grade conforming to IS: 694 / IS: 7098 (Part-1), complete in all aspects all as specified and as directed. |
| 71 | Description all as per item No 36.00 but for 1.5 sqmm copper conductor cable of three core complete. |
| 72 | Description all as per item No 36.00 but for 2.5 sqmm copper conductor cable of three core complete. |
| 73 | Description all as per item No 36.00 but for 4.0 sqmm copper conductor cable of three core complete. |
| 74 | Supply and fix single-core, PVC insulated, FRLSH (Flame Retardant Low Smoke Halogen) PVC sheathed, unarmored copper conductor cable of under mentioned size, for 1100V grade conforming to IS: 694 / IS: 7098 (Part-1), complete in all aspects all as specified and as directed. |
| 75 | Description all as per item No 37.00 but for 1.5 sqmm copper conductor cable of three core complete. |
| 76 | Description all as per item No 37.00 but for 2.5 sqmm copper conductor cable of three core complete. |
| 77 | Description all as per item No 37.00 but for 4.0 sqmm copper conductor cable of three core complete. |
| 78 | S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. |
| 79 | S & F in repair MCCB 415 V, 100 Amps, 35 KA, 4 Pole complete all as specified and directed. |
| 80 | S & F in repair MCB TPN, 415 Volts, 100 Amps complete all as specified and directed. |
| 81 | S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed. |
| 82 | S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed. |
| 83 | S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed. |
| 84 | S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed. |
| 85 | S & F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed. |
| 86 | S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed. |
| 87 | S&F single pole and neutral enclosure with a 2 pin plug and socket with one MCB 20 Amp complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand |
| 88 | S&F bell, multi music type, AC, 230V complete all as specified and as directed. |
| 89 | S&F Modular white, RJ11, telephone Jack, single with shutter, 1 module complete all as specified and as directed. Make : Anchor Roma 66551 or equivalent Model of Make mentioned in PS. |
| 90 | S&F in replacement flexi bell, the wireless door bell with no interference including all accessories like remote and Batteries complete all as specified and as directed. Make : Anchor Model 22740 or equivalent Model of Make mentioned in PS. |
| 91 | S&F in replacement Modular white, TV socket outlet single, 1 module complete all as specified and as directed. Make : Anchor Roma 66602 or equivalent Model of Make mentioned in PS. |
| 92 | S&F in replacement uni Switch socket combination box, made by polycarbonate , with 2 fixing holes, 5 in 1, 3 pin, 20 Amps and 10 Amp, flush type universal, 240 Volts in white color complete all as specified and as directed. Make: Anchor PENTA Model 14616 or equivalent Model of Make mentioned in PS. |
| 93 | S&F in replacement Brass lamp holder (batten type/ pendent type/Brass Back plate Lamp Holder/Burfi holder etc), base cap B22/E-14/E-27 as required at site complete all as specified and as directed. |
| 94 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. Make- anchor or equivalent. |
| 95 | S&F in replacement 6/10/13 Amps, Spike Guard, with 4 Nos sockets controlled by single switch, indicator and overload protection, voltage Surge protection, moulded plug conforming to ISI requirement, with 4 Metre, 3 core, 2.5 Sqmm insulated wire, versatile socket compatible with multi plug special slot to hang product vertical. Make Anchor Cat No 22670/22648/22048 or equivalent Model of Make mentioned in PS. |
| 96 | S&F in replacement decorative ultra slim, round profile, LED light fitting, with extruded polycarbonate, environment friendly, energy Power saving, LED glow batten fitting light 20/22 Watt, 4 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat Part No LHEXBLP7PN1W020 or equivalent Model of Make mentioned in PS. |
| 97 | S&F in replacement Power saving LED Colour changing Batten light fitting from warm white to natural white to cool white, 20/22 Watt, 4 feet (Approx), 6500K, 230 Volts, change colour complete all as specified and as directed. Make- Havells cat part no LHEXAXPNIN1W020 Led pride plus triyca batten or equivalent Model of Make mentioned in PS. |
| 98 | S&F in replacement LED decorative, wall mounting, light fitting, with plastic body, suitable for B22 type LED lamp, with opal white, PC diffuser poetics for glair free light, including mounting brackets etc complete, including one No 9 Watt LED Lamp complete all as specified and as directed. Make:- Havells Cat part no - LHFOECE1TZ1O014 Stylo Wall Light 9W or equivalent Model of Makes Mentioned in PS. |
| 99 | S&F in replacement tuneable RGB smart bulb Leaves power to change the mood and the with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHLDAMED3W8R009 or equivalent Model of Makes Mentioned in PS. |
| 100 | S&F in replacement 6 Watt, LED capsule/LED GU 10 /GU10C /candle LED SES, E-14 small screw cap, 230 Volt or as required as per site requirement complete all as specified and as directed. |
| 101 | S&F in replacement LED Lamp, 0.5 Watt, 230 Volts complete all as specified and as directed. |
| 102 | S&F in replacement LED Lamp (bulb), 9 to 12 Watt, 230 Volts complete all as specified and as directed. |
| 103 | S&F in replacement LED Lamp(bulb) , 18 Watt, 230 Volts complete all as specified and as directed. |
| 104 | S&F in replacement Pull Cord Switch or rotary Switch, 5 Amp, 250 Volt, one way, to ON and OFF the indicator lamps complete all as specified and as directed. |
| 105 | S&F in replacement, E-27/E-40, threaded lamp holder suitable for garden light fittings complete all as specified and as directed. |
| 106 | S&F in replacement Black aluminium outdoor, wall light, with tempered glass, with B22 holder and plug, including 9 Watt LED Lamp, including all accessories suitable for Decorative Gate lighting to match with the existing light complete all as specified and as directed. |
| 107 | S&F in replacement 4 Watt 5000K white DESKLITE SLEEK WITH ADJUSTABLE LAMP SHADE AND CONNECTING ROD WITH FLEXIBLE TURNING MANUAL SWITCH with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEXBVP7SN1W005 or equivalent Model of Makes Mentioned in PS. |
| 108 | S&F in replacement 7.5 Watt A60 LED Filament Lamp Black Decorative surface mounting dome shaped pendant in green & black finisheswith all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No -LHFHDPE1TN1K020 or equivalent Model of Makes Mentioned in PS. |
| 109 | S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed. |
| 110 | S&F in replacement Plug Top, 15 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed. |
| 111 | S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting complete all as specified and as directed. |
| 112 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed. |
| 113 | S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed. |
| 114 | S&F industrial socket for sheet metal enclosure AC Box of capacity 20 Amp complete in all aspect all as specified and as directed. |
| 115 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed.Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth strip/wire. |
| 116 | BLANK |
| 117 | S&F in repair PVC casing caping, medium grade, size 25 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed. |
| 118 | S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed. |
| 119 | Description all as per item No 77.00 here in before but 25 mm bore complete all as specified and as directed. |
| 120 | S&F in repair modular blanking plate, 1 Module complete all as specified and as directed. |
| 121 | S&F in repair Plastic surface box 3 module for 3 Module Sheet cover complete all as specified and as directed. Make- Anchor/havells |
| 122 | S&F in repair Plastic surface box 6 module for 6 Module Sheet cover complete all as specified and as directed. Make- Anchor/havells |
| 123 | S&F in repair Plastic surface box 12 module for 12 Module Sheet cover complete all as specified and as directed. Make- Anchor/havells |
| 124 | M&L for supply and laying of ISI-marked, 1100V grade, LT (Low Tension) Aluminum conductor, XLPE insulated, PVC inner-sheathed, galvanized steel strip/wire armored, and PVC outer-sheathed power cable of specified size and core including handling and unrolling the cable from drums, laying it directly in the ground in a standard excavated trench complete in all aspect all as specified and as directed. |
| 125 | Description all as per item No 83.00 here-in-before but for 120 Sqmm 3.5 core complete in all aspect. |
| 126 | Description all as per item No 83.00 here-in-before but for 70 Sqmm 3.5 core complete in all aspect. |
| 127 | Description all as per item No 83.00 here-in-before but for 50 Sqmm 3.5 core complete in all aspect. |
| 128 | Description all as per item No 83.00 here-in-before but for 35 Sqmm 3.5 core complete in all aspect. |
| 129 | Description all as per item No 83.00 here-in-before but for 25 Sqmm 3.5 core complete in all aspect. |
| 130 | Description all as per item No 83.00 here-in-before but for 16 Sqmm 4 core complete in all aspect. |
| 131 | M&L for straight-through jointing kits suitable for 1100 Volt grade, multi-core, XLPE/PVC insulated, aluminum/copper conductor, armored Low Tension (LT) underground power cables, complete with heat-shrinkable/cast-resin insulating sleeves, high-conductivity mechanical/crimping ferrules, stress control tubing, mastic sealants, earth continuity copper braid, galvanized steel armor clamps, and all other necessary jointing accessories, executed by a certified and experienced cable jointer, including required excavation, backfilling, and minor civil works to ensure a completely water-tight and electrically sound joint, conforming to relevant IS/IEC standards; approved makes: Raychem (TE Connectivity), 3M or Yamuna Denso. |
| 132 | Description all as per item No 84.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 25-50 sq mm complete. |
| 133 | Description all as per item No 84.00 here in before but LT 3.5/4 Core XLPE/PVC cable of size 70-120 sq mm complete. |
| 134 | S&F in replacement Bldg security light fitting LED 45 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. |
| 135 | M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole of height above 7 Metre up to 11 metre, including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed. |
| 136 | BLANK |
| 137 | S&F in replacement LED decorative post Top lantern, 25Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. |
| 138 | S&F in replacement LED decorative post Top lantern, 35Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. |
| 139 | S&F in replacement 150 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high efficiency LEDs as lighting source and lens embedded PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07, with toughened glass top cover, with 10KV Built-in Surge Protection Device complete all as specified and as directed. |
| 140 | S&F pole mounted junction box (Street light boxes) sliding type (Door fits to base by means of sliding) for 3 phase 4 wire lighting system, moulded in FRP including provision of 2 Nos MCB 16 Amps and bus bar insulator- 4 Nos with nut & bolts with fixing arrangement, outdoor type of dimensions 345 x 250 x 150 mm ( H x W x D) complete all as specified and directed. |
| 141 | S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 150 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. |
| 142 | S&F in replacement RGB LED flood light 150 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. |
| 143 | S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 200 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. |
| 144 | S&F in replacement LED flood Light fitting 250 watt, system efficiency not less than 100 lumen / watt, IP66protection, consisting of high/ low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on bracket/ Channel & connecting, complete. Make:- Cat No JETAIRSALPHAFL250WLED757APLTG in Havells or equivalent model of make/ CG/ Philips makes mentioned in PS. |
| 145 | S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 300 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. |
| 146 | S&F outdoor LED Bollard Light fixture, complete with die-cast aluminium housing, polycarbonate diffuser, high-efficiency integral LED driver, suitable for operating on 230V AC, 50 Hz supply, IP-65 weather-proof protection, complete with internal wiring, earthing terminal, complete with making of all necessary excavation work , PCC (Plain Cement Concrete) foundation block casting and mounting/grouting complete as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 147 | S&F outdoor LED Bollard Light fixture, complete with die-cast aluminium housing, polycarbonate diffuser, high-efficiency integral LED driver, suitable for operating on 230V AC, 50 Hz supply, IP-65 weather-proof protection, complete with internal wiring, earthing terminal, complete with making of all necessary excavation work , PCC (Plain Cement Concrete) foundation block casting and mounting/grouting complete as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender