Tender For Certain Repair Work Steel And Wooden Furniture And Re-Canning Chairs At Mil Stn Beas Under Ge Kapurthala
Tender Value
27 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair Work Steel And Wooden Furniture And Re-Canning Chairs At Mil Stn Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Certain repair work steel and wooden furniture and re-canning chairs at Mil Stn Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | POLISHING TO WOODEN FURNITURE :- Removing of old polish of the the following wooden furniture by rubbing with sand paper having proper size and making the surface smooth and clean and M&L for polishing on all visual surfaces (internal & external as shown on drg) with first quality wood colour french polish on all exposed surface with glossy finish with complete all as specified and as directed by Engineer-in-charge. Note : work Shall be executed at site and location given by Engineer-in-charge. |
| 3 | (a) Chair Dining |
| 4 | (b) Chair Easy |
| 5 | (c) Chair writing |
| 6 | (d) Chair WB |
| 7 | (e) Hard Bed with Plywood top |
| 8 | (f) Sofa set 5 seater |
| 9 | (g) Table center |
| 10 | (h) Table Dining 6 pers |
| 11 | (j)Table 900x600x760 mm |
| 12 | (k)Table 900x600x760 mm |
| 13 | (l) Teapoy (W) |
| 14 | (m) Peg table |
| 15 | (n) Table Dressing gents with mirror |
| 16 | (o)Table Writing |
| 17 | (p) Table Bed side |
| 18 | (q) Side Board |
| 19 | REPAIRING TO WOODEN FURNITURE |
| 20 | Chair Dining CB :- Removing the old UNSV part/components of chair dining and S&F the following new parts/components of Seasoned Teak wood of same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 21 | (a) Front Legs 55 x 30x 440mm |
| 22 | (b) Rear Legs 65 x 45x 890mm |
| 23 | (c) Side Rail/front rail (Canning patti) 65 x 30 x440mm |
| 24 | (d) Back Rail 45 x 35 x 405mm |
| 25 | (e) Stiffener 25 x 20 x 430mm |
| 26 | CHAIR EASY :- Removing the old UNSV part/components of chair Easy and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 27 | (a) Front Legs 50 x 25 x 545mm |
| 28 | (b) Rear Legs 55 x 25 x 490mm |
| 29 | (c) Side Rail/front rail (Canning patti) 55 x 25 510mm |
| 30 | (d) Arms rest |
| 31 | (e) Back Rail 50 x 25 x 480mm |
| 32 | (f) Stiffener 25x20x450 |
| 33 | Chair Writing :- Removing the old UNSV part/components of chair writing and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 34 | (a) Front Legs 45 x 45 x 685mm |
| 35 | (b) Rear Legs 65 x 45 x 890mm |
| 36 | (c) Side Rail/front rail (Canning patti) 65 x 30 x 535mm |
| 37 | (d) Back Rail 65 x 30 x 470mm |
| 38 | (e) Arms rest |
| 39 | (f) Stiffener 25 x 20 x 535mm |
| 40 | Table 900 x 600 760mm (W)/ Table writing 1145x600x760mm :-Removing the old UNSV part/components of Table writing and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note : work Shall be executed at site and location given by Engineer-in-charge. |
| 41 | (a) Legs |
| 42 | (b) Top rail for table 900x600x760mm |
| 43 | (c) Bottom rail |
| 44 | (d) Stiffener/Bracket |
| 45 | (e) Table Top 18mm thick prelaminated partical board (Grade I Type II IS 12823) for table 900x600x760mm |
| 46 | (f) Table Top 18mm thick prelaminated partical board (Grade I Type II ISI Mark IS 12823) for table 1145x600x760mm |
| 47 | (g) Top rail short for table 1145x600x760 |
| 48 | Table dining 6 :- Removing the old UNSV part/components of Table Dining and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 49 | (a) Legs 75 x40 760mm |
| 50 | (b) Top Long rail 25 x100 x 1500mm |
| 51 | (c) Top short/Bottom rail 25 x 100 x900mm |
| 52 | (d) Top Stiffner 100 x25 x 900mm |
| 53 | (d) Table Top 18mm thick prelaminated partical board (Grade I Type II IS 12823) |
| 54 | Teapoy :- Removing the old UNSV part/components of Teapoy and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 55 | (a) Legs 60 x30 x540mm |
| 56 | (b) Top rail 20 x50 600mm |
| 57 | (c) Bottom rail 20 x50 600mm |
| 58 | (d) Stiffner Rail 20 40 x300mm |
| 59 | (e) Teapoy Top 18mm thick prelaminated partical board (Grade I Type II IS 12823) for Teapoy |
| 60 | Peg Table :- Removing the old UNSV part/components of Peg table and S&F the following new parts/components of same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 61 | (a) Legs 30 x50 380mm |
| 62 | (b) Top rail 20 x 40 450mm |
| 63 | (c) Bottom rail 20 x 40 x 300mm |
| 64 | (d) Table Top 18mm thick prelaminated partical board (Grade I Type II IS 12823) |
| 65 | SOFA SET 5 SEATER :- Removing of old existing unserviceable cushion foam of sofa set (3+1+1) 5 Seater and supply only new cushion foam having size 530mm X 560 mm X100mm and 40 density ( Make :- Kurlon/Sleep well/Feather Foam) with high quality tapestry cloth Make of 'D' Decor made with cover on Gada cloth duly zipped with PVC Zip (Openable type) Tapestry cloth should be approved by Engineer-in-Charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 66 | Table Dressing Gents with mirror :- Removing the old UNSV part/components of Table dressing Gents with mirror, S&F the following new parts/components of Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 67 | (a) Drawer with knobs |
| 68 | (b) Looking glass 380 x 760mm x 4mm thick |
| 69 | (c) TW long rail (Looking glass frame) 25 x 35 x1750mm |
| 70 | (d) TW short rail (Looking glass frame) 25 x 35 x380mm |
| 71 | (e) Back ply 6mm thk for back side of glass.380 x760 x6mm |
| 72 | Bed Hard Plywood Top :- Removing the old UNSV part/components of Bed hard Plywood Top, S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 73 | (a) Plywood Commercial of size 6' x 3' x 12mm (Make : Green Ply Kitply, Century, OrchidPly, National) |
| 74 | (b) Head board of 1st class hard wood (Teak wood) to match with existing complete all as per drawing. |
| 75 | (c) Foot board of 1st class hard wood (Teak wood) to match with existing complete all as per drawing. |
| 76 | (d) Long rail of 1st class hard wood 0f size 90 x35 x 1880mm(Teak wood) to match with existing complete all as shown on drg |
| 77 | (e) Short rail of 1st class hard wood 0f size 90 x35 x 1880mm(Teak wood) to match with existing complete all as shown on drg |
| 78 | (f) Stiffener for Bed of 1st class hard wood 40 x60 x900mm (Teak wood) as per drawing. |
| 79 | SOFA SET 5 SEATER :- Removing the old UNSV part of sofa set 5 seater, S&F the following new parts of first class teak wood same size and repair sofa set as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 80 | (a) Arm |
| 81 | (b) Front leg |
| 82 | (c) Rear leg |
| 83 | (d) Back Rail |
| 84 | (e) Front Long Rail |
| 85 | (f) Rear long rail |
| 86 | Table Centre :- Removing the old UNSV part/components of Table Centre and S&F the following new parts/components of seasoned Teak wood same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note:- Work shall be executed at site and location given by Engineer-in-charge. |
| 87 | (a) Legs |
| 88 | (b) Top rail Long |
| 89 | (c) Top rail Short |
| 90 | (d) Stiffner Rail |
| 91 | (e) Table Centre Top 18mm thick prelaminated partical board (Grade I Type II ISI Mark IS 12823) |
| 92 | Table Bed Side :- Removing the old UNSV part/components of Table bed side and S&F the following new parts/components of same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge.Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 93 | (a) Back Ply 6mm thick . Make Green Ply, Kitply, Century |
| 94 | (b) Side Pannel of Pre laminated Particle board 18 mm thick (Grade I Type II ISI 12823) Make-Green Laminated eco Board Kitply |
| 95 | (c) Shelf of pre laminated particle board 18mm thick (Grade I Type II ISI 12823) Make-Green Laminated eco Board Kitply |
| 96 | Side Board :- Removing the old UNSV part/components of side board and S&F the following new parts/components of same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge. Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 97 | (a) Back Ply 6mm thick . Make Green Ply, Kitply, Century |
| 98 | (b) Side Pannel of pre laminated particle board 18mm thick (Grade I Type II ISI 12823) Make-Green Laminated eco Board Kitply |
| 99 | (c) Shelf of pre laminated particle board 18mm thick (Grade I Type II ISI 12823) Make-Green Laminated eco Board Kitply |
| 100 | (d) Knob for Drawer (ISI Mark ) |
| 101 | Teapoy Varandha :- Removing the old UNSV Top of teapoy Vearandha and S & F the new Top of 18mm thick Pre laminated particle board top of same size of (Grade I Type II ISI Mark IS 12823) Note : Work Shall be executed at site and location given by Engineer-in-charge. Make-Green Laminated eco Board Kitply |
| 102 | CANNING PORTION :-Removal of old unserviceable cane of following chair and M & L for recanning with new standard first quality cane 2mm wide half round type with border of 4mm wide half round plastic cane ( Maharastra Cane white colour ) of the same colour and quality Godrej pattern complete as shown on drg and directed by Engr-in-charge. Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 103 | (a) Chair Easy |
| 104 | (b) Chair Writing |
| 105 | (c ) Chair Dining |
| 106 | Chair Verandah :- Removal of old unserviceable cane/ PVC seat of chair Verandh and M & L for recanning with new standard first quality cane 4mm wide white plastic cane half round type matt Pattern Make;-Maharastra. complete as shown on drg and directed by Engr-in-charge. Note : Work Shall be executed at site and location given by Engineer-in-charge. |
| 107 | Schedule 'A' Part-II (Repairing to steel furniture) |
| 108 | Almirah Large Steel /Almirah Med Steel :- Removing the old UNSV part of Almirah steel large/med and S & F the following new part, and repair with respective and make smooth and fine the part, body of Almirah steel Large & med as per drawing with complete all as specified and as directed by Engineer-in-charge. (Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 109 | (a) Leg made out of 18 Gauge thick MS sheet. |
| 110 | (b) Shelves made out of 18 Gauge thick MS sheet. |
| 111 | (c) New lock of brass with 4 (Four) levers to Almirah steel of type Gde -I quality conforming to IS with duplicate key, (Make : Godrej, Link, Harrison) |
| 112 | (d) CP handle Make : Godrej |
| 113 | (e) Almirah Locking device with rods |
| 114 | Table Office Clerk Steel :- Removing the old UNSV part of Table office clerk steel, and S & F the following new part, and repair with respective as per drawing with complete all as specified and as directed by Engineer-in-charg. ( Work should be done on site given) |
| 115 | (a) Drawer made out of 20 Gauge thick MS sheet. |
| 116 | (b) New lock of brass with 4 (Four) levers to Almirah steel of Gde -I quality conforming to IS with duplicate key, (Make : Godrej, Link, Harrison) |
| 117 | ( c) Table Top 18mm prelaminated Particle board laminated (ISI Mark) and edges covered with teak wood beading Make-Green Laminated, eco Board, Kitply |
| 118 | (d) Hard Rubber shoes |
| 119 | Table Office Officer Steel :- Removing the old UNSV part of Table office officer steel, and S & F the following new part, and repair with respective as per drawing with complete all as specified and as directed by Engineer-in-charg. ( Work Should be done on site given) |
| 120 | (a) Drawer made out of 20 Gauge thick MS sheet. |
| 121 | (b) Lock 4 lever of brass of drawer with duplicate key. Make : Godrej |
| 122 | ( c) Table Top 18mm Particle board laminated (Grade I Type II ISI 12823) and edges covered with teak wood beading Make-Green Laminated eco Board Kitply |
| 123 | (e) Hard Rubber shoes |
| 124 | CHAIR CBA STEEL WITH ARMS :- Removing the old UNSV Seat & Back of chair CBA Steel S & F the seat & back of chair of teak wood frame with godrej pattern weaved cane of 2mm thick ( Maharastra cane ) White. Note : work shall be executed at site and location given by Engineer-in-charge. |
| 125 | (a) Seat of chair |
| 126 | (b) Back of chair |
| 127 | Locker Bed side :- Removing the old UNSV part of Locker bed side and S & F the following new part, and repair with respective and make smooth and fine the part, body of Locker bed side as per drawing with complete all as specified and as directed by Engineer-in-charge. (Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 128 | (a) Leg made out of 18 Gauge thick MS sheet. |
| 129 | (b) Shelves made out of 18 Gauge thick MS sheet. |
| 130 | (c) Haps and stapple & locking device |
| 131 | Charpoy IP with Ply Top : Removing the old UNSV Plywood Top and fixing New ply wood BWR commercial plywood (ISI Marked) size 6'x3'x12mm thick to same plateform with nut and bolts as suitable size complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/01. : Work shall be executed at site and location given by Engineer-in-charge. |
| 132 | Table steel 900x900x760mm : Remove UNSV Table Top and fixing newTable Top 18mm Particle board laminated (Grade I Type II ISI 12823) and edges covered with teak wood beading Make-Green Laminated eco Board Kitply |
| 133 | Table steel 900x600x760mm w/out drawer : Remove UNSV Table Top and fixing newTable Top 18mm Particle board laminated (Grade I Type II ISI 12823) and edges covered with teak wood beading Make-Green Laminated eco Board Kitply |
| 134 | PAINTING TO STEEL FURNITURE :- Removing of old UNSV paint of steel furniture by rubbing with sand paper of proper size and make the surface smooth and clean internal & external as shown on drg including removing of dent if any and M&L for applying Spray Painting two coat of synthetic enamel paint (OG/Smoke Gray/White) over coat of red oxide primer in appropriate shade Make : Nerolac/Asian paint as per the existing requirement and complete all as specified and directed by Engr-in-charge. Note :Work shall be executed at site and location given by Engineer-in-charge. |
| 135 | (a) Almirah large steel with shelves |
| 136 | (b) Almirah medium steel with shelves |
| 137 | (c) Table office clk steel with drawer |
| 138 | (d) Table office officer steel with drawer |
| 139 | (e) Book shelf open large |
| 140 | (f) Chair CBA steel with Arms |
| 141 | (g) Locker Bed side steel |
| 142 | (h) Stool Steel 305x305x510mm |
| 143 | (j) Chair varandah |
| 144 | (k) Teapoy varandah |
| 145 | (l) Table Steel 900x 900x760mm |
| 146 | (m) Rack steel 1830x1905x760mm |
| 147 | (n) Rack side with four tray |
| 148 | (o) Charpay IP Hard (Frame Only) |
| 149 | Table Steel 900x 600 x760 w/out drawer |
| 150 | Charpoy GI Pipe with Ply Top : Removing the old UNSV part/components of GI Charpoy Plywood Top and S&F the following new parts/components of same size and repairs with respective as per drawing with complete all as specified and as directed by Engineer-in-charge.Note : Work shall be executed at site and location given by Engineer-in-charge. |
| 151 | (a) 12mm thick (1980mmx900mm size) both side commercial plywood top (ISI Marked) BWR grade with & including MS flat iron 32mmx5mm, 900mm long for 04 Nos in each charpoy having one Nos holes near each end of fixing the plywood top with purpose made round head mild steel nut & bolts/washer welded and applying two coats of synthetic enamel paint in black colour over a coat of red oxide primer complete all as specified and as directed. (Drg No FD-220 ) Make-Green plyl, centurly, orchid ply Kitply , National |
| 152 | (b) GI Long Rail Pipe 1800x32 mm dia. |
| 153 | (c ) GI Short Rail Pipe 750x32 mm dia |
| 154 | (d) GI Elbow 32mm dia, |
| 155 | Note :- The rates quoted against the items shall deemed to be included for necessary welding & painting works etc; Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender