Tender For Repair To Area Drainage, Culvert, Pathway And Other Related B&R Works At Zone 8 & 9 Md Accn Under Ge(N) Tezpur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Area Drainage, Culvert, Pathway And Other Related B&R Works At Zone 8 & 9 Md Accn Under Ge(N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : REPAIR TO AREA DRAINAGE, CULVERT, PATHWAY AND OTHER RELATED B&R WORKS AT ZONE 8 & 9 MD ACCN UNDER GE(N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8337) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Surface excavation nexc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete in all respect as specified and directed. |
| 4 | Dismantalling of Brick work, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, and pre-cast concrete articles complete in all respect as specified and directed. |
| 5 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm internal dia complete in all respect as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete in all respect as specified and directed. |
| 7 | Dismantling of floor/ wall tiles including cement mortar bedding of any thickness upto PCC/ RCC/brick surface and rubbish off the premises, complete in all respect all as specified and directed. |
| 8 | M & L for Dark shade/black colour Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 9 | M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete in all respect as specified and directed. |
| 10 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete in all respect as specified and directed. |
| 11 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed. |
| 12 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete in all respect as specified and directed. |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed. |
| 14 | Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc. complete in all respect as specified and directed. |
| 15 | M & L for extra forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc for 300mm girth .complete in all respect as specified and directed. |
| 16 | M & L brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete in all respect as specified and directed. |
| 17 | M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 18 | M&L brick work sub class B, class designation 75 old size bricks, laid flat in floors, walls or of similar types, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete in all respect as specified and directed. |
| 19 | M&L brick work (except brick) sub class B, class designation 75 old size bricks, laid flat in floors, walls or of similar types, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete in all respect as specified and directed.Note : Old serviceable brick obtained from demolition of brickwork item here-in-before shall be re-used after cleanig under this item and the rate of cleaning of old serviceable brick shall deemed yo be included in the quoted rate. |
| 20 | M&L brick work sub class B, class designation 75 old size bricks, laid on edge in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete all as specified and directed. |
| 21 | M&L brick work (except brick) sub class B, class designation 75 old size bricks, laid on edge in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete all as specified and directed.Note : Old serviceable brick obtained from demolition of brickwork item here-in-before shall be re-used after cleanig under this item and the rate of cleaning of old serviceable brick shall deemed yo be included in the quoted rate. |
| 22 | M&L 15mm thick rendering on brick work or concrete wall surfaces in cement mortar 1:6, finished even & smooth with using extra cement complete in all respect as specified and directed. |
| 23 | M&L for PCC 1:3:6 type C1 (using 20mm nominal size crushed and graded stone aggregate) as in surface channels & drains complete in all respect as specified and directed. |
| 24 | M&L for cement concrete Type D-2, 1:4:8 (using 40mm nominal size crushed and graded stone aggregate) in foundations filling and mass concrete as in surroundings of fencing post etc. complete in all respect as specified and directed. |
| 25 | M & L for RCC Cement concrete (Nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all respect as specified and directed. |
| 26 | M & L for RCC Cement concrete (Nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregate) in Columns, pillars, piers, posts and struts complete in all respect as specified and directed. |
| 27 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finish of flat surface complete in all respect as specified and directed. |
| 28 | Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions in fair finish of flat surface complete in all respect as specified and directed. |
| 29 | M & L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking , bending spirally for hooping for columns, hooking and binding with and including mild steel wire (ammealed) not less than 0.9 mm dia complete in all respect as specified and directed. |
| 30 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 31 | M & L for 300mm internal dia of Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches complete in all respect as specified and directed. |
| 32 | M&L for plinth protection or in foot path of 75 mm thick of cement concrete using type C-1, 1:3:6 (using 20 mm nominal size crushed and graded stone aggregate) in alternate penals and finished fair and even complete in all respect as specified and directed. |
| 33 | M&L precast cement concrete type B0 1:2:4 (using 12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar (1:4) complete in all aspect as specified and directed |
| 34 | Providing precast cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) in cover slab (Drain) chullah hoods, chajjas, water troughs, mangers shelves and similar article with plain face set in cement mortar 1:4 complete in all respect as specified and directed. |
| 35 | M & L PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate in coping, hold fasts or of similar items including necessary cutting, form work etc. complete in all respect as specified and directed. |
| 36 | M & L 40 mm thick PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate finished the surface even and fair without using extra cement complete in all respect as specified and directed. |
| 37 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete in all respect as specified and directed. Note: Sample as approved by GE. |
| 38 | Removing and re-fixing for 55-60mm thick coloured, glazed pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658/1237 with upto date amendments, M-35 Grade with grey cement with pigment laid over and including fine river bed sand complete in all respect as specified and directed. |
| 39 | M&L for sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed. |
| 40 | M & L for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 41 | M&L in repairs for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete in all respect as specified and directed. |
| 42 | Providing & laying heavy duty non skid coloured digital printed floor tiles of area exc. 0.09Sqm but n.exc.0.16 Sqm, 8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. |
| 43 | S & F for coloured rubber moulded, glazed pre coated chequered cement concrete tiles of 30cm x 30cm x 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over include 15mm thick screed bed in CM 1:4 complete in all respect as specified and directed. |
| 44 | S&F rolled mild steel in joist, angle, channel, beam, flat sections fixed independently without connecting plates etc of grade Fe-410W (GdeE-250) quality A complete in all respect as specified and directed. |
| 45 | M&L mild steel round bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia(Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete in all respect as specified and directed. |
| 46 | Dismantling of posts or struts (Wood, Steel or RCC) of any section and size including taking out embeded portion and making good disturbed ground posts embeded in cement concrete, brick work, masonary complete in all respect as specified and directed. |
| 47 | Excavation in post holes (or similar holes) each not exc. 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50 mtr in soft/loose soil complete in all respect as specified and directed. |
| 48 | Dismantling of fencing wire mesh including tie rods, flat iron etc any type, complete in all respect as specified and directed. |
| 49 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 50 | Supply only chain link MS galvanised fencing any size or type complete all as specified and directed. |
| 51 | S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail s straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc. complete in all respect as specified and directed. |
| 52 | S&F mild steel screw bolts 11 to 15mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and haxagonal or square exe 5 cm and n exc 10 cm long complete in all respect as specified and directed. |
| 53 | M&L mild steel works in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing (Fe 290 (Gde E-165) ) complete in all respect as specified and directed. |
| 54 | S & F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in eves covering, ridges or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete in all respect as specifified and directed. |
| 55 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete in all respect as specified and directed. |
| 56 | S&F coloured 0.50mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws alongwith bitumen washer complete all as specified and directed. |
| 57 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 58 | M&L for preparation of new steel surfaces of any width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed. |
| 59 | M&L for preparation of old steel surfaces of any width or girth and applying one coat of synthetic enamel paints complete all as specified and directed. |
| 60 | M & L for Running welding in repairs exc. 2.5cm but n. exc 5cm in length and exc. 9mm but not exc 20mm complete in all respect as specified and directed. (Note: Welding machine and rod is included in this item, the site is spread in wide spread area, Contractor must quote the rates accordingly) |
| 61 | Preparaing old decorated plastered or unplastered surface of wall and apply two coats of white wash including scrapping down of old white wash completely complete in all respect as specified and directed. |
| 62 | Preparaing old decorated plastered or unplastered surface of wall and apply one coats of synthetic paint complete in all respect as specified and directed. |
| 63 | Preparaing new un decorated plastered or unplastered surface of wall and apply two coats of white wash complete in all respect as specified and directed. |
| 64 | M&L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of cement primer on external walls complete in all respect as specified and directed. |
| 65 | M&L for complete removal of existing treatment on walls, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots by scraping with vaccum based sanding machine, washing with water all as specified, filling cracks/ hole by wall care putty (multipurpose mixer shall be used for uniform & proper mixing of putty) and applying two coat of cement base paint white over a coat of alkali resistent priming paint coloured by auto roller complete in all respect as specified and directed as per manufactures instruction. |
| 66 | M&L for preparation of plastered or unplastered old decorated surfaces of walls, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots , washing with water all as specified, filling cracks/ hole by applying wall care putty and applying one coat of weather coat white or coloured complete in all respect as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender