Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #57142394

Tender For Repair And Upkeep To Certain Wooden Furniture Items In The Aor Of Ge Hisar At Hisar Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Hisar, Haryana
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
5 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Repair And Upkeep To Certain Wooden Furniture Items In The Aor Of Ge Hisar At Hisar Mil Stn

BOQ

Name of Work:- REPAIR AND UPKEEP TO CERTAIN WOODEN FURNITURE ITEMS IN THE AOR OF GE HISAR AT HISAR MIL STN
Sl. No. Item Description
1BED PLY WOOD TOP (FD-246/247);- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.
2Head rest shall be made as per drg
3Foot Rest shall be made as per drg
4Long rails shall be made of Ist class hard wood (Shisham)
5Short rails shall be made of Ist class hard wood (Shisham)
6Stiffener shall be made of Ist class hard wood (Shisham)
7MS bracket of flat iron 25x3mm,200mm long fixed with screw
8Ply wood top 12 mm thick BWP Grade conforming to IS: 710 plywood top as per existing shape and size in One piece
9M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
10REPAIR TO SIDE BOARD (FD-241): S&F in repair to the following parts of side board with 18mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded as per existing shape and size duly planned complete all as specified and directed.
11Bottom
12Shelves
13Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated MDF board front
14Shutter with 40mm size knob
15Back shall be made of 6mm thick commercial plywood.
16Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak)
17M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
18REPAIR OF TABLE BED SIDE (FD-248/276) S&F in repair of the following parts of Table Bed Side with 18mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded as per existing shape and size duly planned complete all as specified and directed.
19Shelf
20Bottom
21Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed
22Ist class hard wood (teak) 6mm thick beading at front on 18 th pre-laminated particle exposed portion of table bed side
23Ist class hard wood (teak) frame with 4 nos of legs duly french polish.
24CHAIR DINING LONG BACK (FD-357);-S&F in repair following part of chair dining long back of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;-
25Rear Legs
26Front Legs
27Side rail of seat frame
28Front/back rails of seat frame
29Foam cushioned of 50mm, 28 density with tapestry cloth on seat of 12mm thick ply
30Foam cushioned of 50mm, 28 density with tapestry cloth on back of 12mm thick ply
31Bottom stiffener
32Nylon buffers on the bottom of legs
33M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
34REPAIR TO TABLE 600mm x 600mm (FD-293):- S&F in repair of the following parts of table 600mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed
35Long Rail
36Short Rail
37Bottom Side stiffener
38Bottom Centre stiffener
39Removing the existing unserviceable table top of table 600 x 600 mm and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
40M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
41REPAIR TO BIN LINEN MULTIPURPOSE (FD-E6/MAP/09)
42Removing of old unserviceable top from bin linen multipurpose and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
43Removing of old and unserviceable door shutters of bin linen multipurpose S&F of new door shutters made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge (Make:- Ecoboard/Action- Tesa / Greenply / Archidlam).
44Removing of old unserviceable hinges and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.
45Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per sample kept at BSO (Office) & as shown on drg and as directed.
46Removing of old magnetic catcher and S&F of new magnetic catcher (EBCO/Godrej/Hettich) to bin linen multipurpose as per size and design shown on drg complete all as specified and directed by Engr-in-charge/GE.
47M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
48REPAIR TO HAT STAND WITH MIRROR (FD-233)
49Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF BWP (IS:710) plywood as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed.
50Removing old broken/ unserviceable plywood from back side of hat stand and S&F new 04mm thick BWP (IS:710) plywood both side laminated as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed.
51Removing of old/ broken looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm fixed in position complete all as shown on drawing (Make:- Modi-guard/Saint-Gobain/Swastik).
52Removing old broken/unserviceable beading from hat stand and S&F new 06x35 mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.
53Removing old broken/unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.
54Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) of latest pattern to hat stand all as directed by Engr-in-Charge/GE.
55M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
56REPAIR TO TV TROLLEY (FD/E6/MAP/04)
57Removing of old broken glass shutters from TV trolley and S&F of new shutters made out of 5.5 mm thick acrylic sheet duly fixed with stainless steel fitting including magnetic catcher to existing TV trolley. All as per size and design shown on drg and as directed/approved by Engr-in-charge.
58Removing of old/ broken swivel type castors from bottom of TV trolley and S&F of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed.
59Removing of old unservicable/broken top of TV Trolley and fixing new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
60All as per srl item No 8.03 here-in-before but bottom of TV Trolley.
61All as per srl item No 8.03 here-in-before but side of TV Trolley.
62All as per srl item No 8.03 here-in-before but back of TV Trolley.
63M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
64TABLE DRESSING LADIES WITH MIRROR (FD-251/378) (FD/MAP-II/07)
65Removing of old unserviceable looking mirror from table dressing ladies and fixing new looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing.
66Removing old broken/unserviceable handle from table dressing ladies and S&F new 75 mm size SS handle as per shape and size shown in drawing and as directed.
67Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated MDF board front
68Removing of old and unserviceable door shutters of table dressing ladies S&F of new door shutters made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge (Make:- Ecoboard/Action- Tesa / Greenply / Archidlam).
69All as per srl item No 9.04 here-in-before but top of table dressing ladies.
70All as per srl item No 9.04 here-in-before but bottom of table dressing ladies.
71All as per srl item No 9.04 here-in-before but side of table dressing ladies.
72All as per srl item No 9.04 here-in-before but back of table dressing ladies.
73M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
74REPAIR OF PEG TABLE (FD-236/266 /277/384) :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed;
75Long rail
76Short rail
77Side stiffener
78Removing the existing unserviceable table top of peg table and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
79M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
80REPAIR TO TABLE DINING 06/08 PERSON (FD-239/269 /273) :- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed.
81Removing the existing unserviceable table top of table dining 8 persons and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
82Removing the existing unserviceable table top of table dining 6 persons and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
83Long rail
84Short rail
85Stiffener
86M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
87REPAIR OF TEAPOY (FD-232/ 278/382) : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:-
88Long rail
89Short rail
90Side stiffener
91Centre stiffener
92Removing the existing unserviceable table top of teapoy and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
93M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
94TABLE WRITING (FD-275) : S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.;-
95Long rail of table frame.
96Short rail of table frame
97Drawer including chromium plated knob of 40mm Dia
98Bottom centre stiffener
99Bottom side stiffener.
100Removing the existing unserviceable table top of table writing and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
101M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
102REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER (FD-231/284):- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed
103Long Rail
104Short Rail
105Bottom Side stiffener
106Bottom Centre stiffener
107Removing the existing unserviceable table top of table 900x600 mm w/o drawer and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
108M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
109REPAIR TO TABLE 900mm x 600mm WITH DRAWER (FD-283):- S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed
110Long Rail
111Short Rail
112Bottom Side stiffener
113Bottom Centre stiffener
114Drawer
115Removing the existing unserviceable table top of table 900x600mm eith drawer and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
116M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
117REPAIR TO TABLE CENTRE (FD-235/274):-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed;-
118Long rail
119Short rail
120Side stiffener
121Removing the existing unserviceable table top of table centre and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
122M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
123REPAIR TO TABLE DINING 04 PERSON 1200mm x 900mm (FD/MAP-II/03) :- S&F in repair following parts of the table 1200x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed ;-
124Long rail
125Short rail
126Removing the existing unserviceable table top of table 900 x 900 mm and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
127M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE.
128REPAIR OF TABLE DRESSING GENTS (FD-31 (M)/230) ;- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-
129Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.
130Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size
131Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.
132Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size
133CHAIR EASY WITH CUSHIONU (FD-358):- S&F in repairs following parts of the chair easy with cushion with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-
134Rear Legs
135Front Legs
136Side Rails
137Front/Back Rails
138Back Stiffener
139Bottom Stiffener
140Arms rest
141S&F of cushion foam for chair easy seat and back made of 28 density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM
142M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge/GE. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57142394
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 25 Lakhs
LAST DATE 04-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair And Upkeep To Certain Wooden Furniture Items In The Aor Of Ge Hisar At Hisar Mil Stn
Basic Detail
Tender No GE(H)-22/2026-27
Bidding Type Tender
Location
City Hisar
State Haryana
Key Dates
Publish Date 21 Aug 2026
Submission Date 04 Sep 2026
Open Date 07 Sep 2026
Finance
Tender Value 25 Lakhs
Tender Fee 500
EMD 50000
Exemption Available
Document List
b50f10ad-7cf9-490a-802b-a6ee1652fd71.html
BOQ_880457.xls
TENDERGE22.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

b50f10ad-7cf9-490a-802b-a6ee1652fd71.html

xls

BOQ_880457.xls

pdf

TENDERGE22.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders