Tender For Repair, Cleaning And Replacement Of Septic Tanks, Manholes And Sewage Lines, Repair/Maint Work To Attend Day To Day Complaints, Repairs To Leakage, Seepage Including Roof Treatment And Internal Water Supply For Pt & Ty Bldgs To Md/Otm In C
Tender Value
42 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
16 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Cleaning And Replacement Of Septic Tanks, Manholes And Sewage Lines, Repair/Maint Work To Attend Day To Day Complaints, Repairs To Leakage, Seepage Including Roof Treatment And Internal Water Supply For Pt & Ty Bldgs To Md/Otm In Comd Hq Incl Anc C , installation Jarawa Incl Mt, Ndv, Odv, Kumarkheti Incl Inwtc And Zephyr Of Age B/R-I Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Removing and Cleaning out blockage of water closet including WC trap of any description and in any position by removing sand / sludge / silt and other foreign material deposited in it (either manually or mechanically) upto first manhole and making the sewerage system functional to the entire satisfaction complete all as specified and as directed |
| 2 | Removing and Cleaning out blockage from traps of bathroom / kitchen sink / wash basin / urinal point and gully traps of any description and in any position by removing sand / sludge / silt and other foreign material deposited in it (either manually or mechanically) upto first manhole and making the sewerage system functional to the entire satisfaction complete all as specified and as directed |
| 3 | Taking out carefully the cover slab of gulley traps of any size, shape, depth and cleaning the block by removing the scum / sludge / any material and removing to a distance exc 250m and n. exc 500m and cleaning with fresh water incl placing the cover slab / grating in position complete all as specified and as directed |
| 4 | Cleaning sewage line of any dia using passing rubber ball through line to ensure all blockage perfectly clear or split bamboo with a gunny bag piece tied with bamboo with binding wire and inserting the bamboo in sewage line through manhole/gully trap for clear flow of sewage in sewage pipe line complete all as specified and directed |
| 5 | Sucking of sewage water from septic tank / soakage well etc of any size and depth by mechanical means i.e. suction pumping set etc and removing the muddy water in liquid or semi-liquid state and removing to a distance exc 500m and n. exc 5 km. The muddy sewage water to be disposed off in closed container and to be burried under the ground complete all as specified and directed |
| 6 | Taking out and removing sludge / waste materials/foreign materials from septic tank / soakage well etc of any size and depth by manual labour or mechanical means and burying the entire sludge under ground in a pit of suitable size and covering the pit with earth or earth mixed rubbish incl make good to surface and removing surplus soil to a distance n. exc 500m complete all as directed |
| 7 | Cleaning manhole of any depth, size and shape with spades or bucket and taking out sludge and disposed off aside by burying the entire sludge under ground in a pit of suitable size by putting earth on it. Again use water with bucket and put into manhole to clear the sludge and ensure the sludge is drain out complete all as specified and directed |
| 8 | Cleaning surfaces of RCC and AC sheet roofing RCC chajjah , sides of parapet walls by uprooting the unwanted vegetation and scrapping with steel wire brush ,watering and sweeping including taking down the leonine trees over roofs and removing the derbis to a distance exc 250m and n.exc.,500m complete all as directed. |
| 9 | Complete removal of trees/plants, upto roots growth on bldg's roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs and removing the material (Branches and plants ) to outside MOD land complete all as directed Note : Work to be carried out up to 04 storey building complete all as specified and directed. |
| 10 | Making arrangement of scaffolding in the shafts height upto 10 meter, cutting holes around the bends, tees, junctions of any description in the leakage/seepage and making good the cut portion with cement mortar 1:3 or PCC 1:2:4 (using 12.5mm graded stone aggregate) including two coats of acrylic emulsion antifungal paint with primer complete all as specified and as directed |
| 11 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed |
| 12 | Excavation in trenches n. exc 1.5m wide and exc 1.5m but n. exc 3m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed |
| 13 | M&L for returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 14 | M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 16 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and as directed |
| 17 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole including necessary formwork complete all as specified and directed |
| 18 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 19 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed |
| 20 | M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed |
| 21 | M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, padding, sunken, coping portion rounded chamfered on edge complete all as specified and directed |
| 22 | M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed |
| 23 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. |
| 24 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified |
| 25 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 26 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 27 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of damp proof paint over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed |
| 28 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 29 | Supply only liquid water proofing compound |
| 30 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement complete all as directed. |
| 31 | M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as directed. |
| 32 | M & L for preparation and complete removal of existing treatment of old plastered surfaces of wall and applying two coats of white wash complete all as directed. |
| 33 | Preparation of new surfaces of brick, stone, concrete, asbestos or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint (plaster coat) complete all as specified and directed. |
| 34 | Preparation of old surfaces of brick, stone, concrete, asbestos or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint (plaster coat) complete all as specified and directed. |
| 35 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over a coat of damp proof paint complete all as specified and directed |
| 36 | Taking down of damaged/ loosened cement concrete/cement mortar in RCC walls/soffits of slabs and similar structure members up to depth of 20mm to 40mm. Cleaning the dismantled portion with wire brush, etc to remove dust , dirt and other foreign particles and washing with water under pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Providing and applying two coats of rust preventive slurry made of \\"Polyalk Fixoprime\\" or equivalent in portion 1:1.5 to existing reinforcement bars over prepared surfaces provide and apply 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m height complete and finally applying two coats of oil bound distemper with roller finish over a coat of chalk whiting primer over an avg 2mm thick of wall care putty all as specified and directed. |
| 37 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 38 | M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, drain cover, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed (Note : Reinforcement shall be measured and paid for separately) |
| 39 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 40 | M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 41 | Demolition and breaking up 150mm dia (Salt glazed ware, AC or reinforced concrete) pipe jointed in cement mortar and disposed off the premises complete all as specified and directed |
| 42 | S&F PVC (SWR) pipe 150mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 43 | M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 450mm to sewage pipes of 150mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed |
| 44 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 45 | M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 410mm to sewage pipes of 110mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed |
| 46 | M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed |
| 47 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed |
| 48 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 49 | S&F in repair PVC (SWR) 110mm dia bend of any radius with access door and jointed with approved adhesive complete all as specified and directed |
| 50 | S&F in repair PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed |
| 51 | S&F in repair PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed |
| 52 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed |
| 53 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 54 | S&F in repair PVC (SWR) bend 75mm dia with access door, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 55 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 56 | S&F in repair 75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed |
| 57 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 58 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 59 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screws all as specified and directed |
| 60 | M&L for anodised aluminium frame for doors, windows, ventilators, partition, wind tie with one or more rebates including joining cleat for fixing etc complete as specified |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 62 | S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 63 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed |
| 64 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 65 | Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 66 | Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed |
| 67 | Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed |
| 68 | Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed |
| 69 | Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongry complete all as specified and directed |
| 70 | Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongrycomplete all as specified and directed |
| 71 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed |
| 72 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing |
| 73 | S&F 100mm size stainless steel butt hinges medium weight complete all as specified |
| 74 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified |
| 75 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified |
| 76 | S&F door seal bottom of width not less than 30mm and length (ranges 500mm to 1200mm) suitable according to door shutter width to protect entry of insects efficiently complete all as specified and directed |
| 77 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone or steel/ aluminium frame concrete or brick surrounds, glazed complete all as specified and directed. |
| 78 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 79 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane complete all as specified and directed. |
| 80 | S&F sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 81 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 82 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 83 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 84 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 85 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 86 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required, etc completed all as specified and as directed. |
| 87 | S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed |
| 88 | S&F in repair stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed |
| 89 | S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 90 | S&F in repair curtain rods 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified |
| 91 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified |
| 92 | S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified |
| 93 | S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified |
| 94 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed |
| 95 | S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified |
| 96 | S&F in repair Vitreous China Urinal, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 97 | S&F 15mm dia brass CP urinal spreader complete all as specified |
| 98 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 99 | S&F in repar 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed |
| 100 | S&F in repair chromium plated brass shower roses with or without swivel joints square type 125mm size including shower arm complete all as specified |
| 101 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 102 | S&F in repair Toilet paper holder Make : Jaquar Code ACN-1153N or equivalent model in Parryware / Prayag / Gem |
| 103 | S&F in repair towel ring round Make : Jaquar AQN -7721 or equivalent model in Parryware / Prayag / Gem |
| 104 | S&F in repair 20 mm dia brass stainless steel tubular towel rail D type 600mm long complete all as specified |
| 105 | S&F in repair tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed Make : Jaquar Cat Part No AQN-7711 |
| 106 | S&F in repair chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified |
| 107 | S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified |
| 108 | S&F in repair bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat Part No CON-107KN |
| 109 | S&F in repair two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified |
| 110 | S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified |
| 111 | S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 112 | S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directedMake : Jaquar Cat Part No CON-053KN |
| 113 | S&F in repair 15mm concealed type angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 114 | S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat Part No CON-167KNB |
| 115 | S&F in repair CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg and wall flange complete all as directed. Make : Jaquar Cat Part No : CON-281KN or equivalent model in Parryware/ Prayag / Gem |
| 116 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified |
| 117 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified |
| 118 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 119 | M&L Non-skid coloured matt finish ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 20 mm thick in CM 1:6 incl dismantling old tiles complete all as specified and directed. |
| 120 | M&L Glazed ceramic coloured tiles as in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm th backing coat of cement mortar 1:4 incl dismantling old tiles all as specified and directed. |
| 121 | Taking down and removing all kind of existing treatment by chiseling/ mechanically etc from the roof slab, parapet wall and other affected area by cutting edges, cleaning the dismantled portion with wire brush etc to make the surface remove from dust, dirt and other foreign particle etc and removing debris 50 Mtr from site all as specified by Engr-in-Charge |
| 122 | M&L for 20mm thick plaster on RCC roof slab in CM 1:4 including water proofing compound @ 3% by weight of cement complete all as specified (Note : WPC shall be measured and paid seperately |
| 123 | M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturer's instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed |
| 124 | M&L for 14-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and as directed by Engr-in-Charge |
| 125 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed |
| 126 | M&L anodized aluminium snap grid framework incl 4 mm thick non asbestos fibre cement building boards 600x600mm incl two coats OBD and preparation of surfaces over board inserted to framework with screws with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender