Tender For Provn Of Security Fence On Boundary Line Between Seven Wells And Tn State Urban Housing And Special Repairs To Bldg No P-20 Defence Civilian Md Accn At Seven Wells Under Ge Chennai
Tender Value
31.98 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
11 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Security Fence On Boundary Line Between Seven Wells And Tn State Urban Housing And Special Repairs To Bldg No P-20 Defence Civilian Md Accn At Seven Wells Under Ge Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exe 25 cm, in soft/ loose /soil. complete all as specified and directed. |
| 2 | M&L for Plain cement concrete 1:2:4, type B2 (using 40mm graded aggregate) as in foundation, filling & mass concrete |
| 3 | S&F concertina coil of 610mm diameter made out of 2.6mm dia spring steel wire 230 G/m 2 (min) dipped with corrosion preventive fluid (rusilo 901) of Castrol make in white colour Each coil having a minimum 50 turns(circles) and an average weight not less than 8.57Kg including handle and spike at both end of coil| erected in position on top of mild steel angle by fixing with GI clip for securing including necessary welding to the MS Section and as per manufactures instruction complete all as specified |
| 4 | M&L for Rolled section of Fe-410- W(Gde E-250) quality B mild steel angles frame including inserting in PCC foundation cutting tops to shape as directed, drilling holes, notching for wire, etc. complete all as specified |
| 5 | S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified (each line wire to be measured) |
| 6 | M&t for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of approprite primer complete all as specified |
| 7 | Removing building materials (other than spoil payable under item no 03028 to 03031 in section 3 earthwork) to a distance of 1km or under beyond the lead Included in the rates, including loading, unloading and stacking at the destination |
| 8 | Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified and directed. |
| 9 | Demolition of reinforced concrete in roofs, floors, (other than ground floors) beams, stair cases, landing chajjas and similar suspended works all as spd. |
| 10 | M&L RCC 1:2:4 type B 1 (using 20 mm graded stone aggregaate) as in cooking platform slab |
| 11 | M&L RCC M-30 design mix using 20 mm graded stone aggregate in Chajja's all as specified |
| 12 | M&L RCC M-30 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span |
| 13 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified. |
| 14 | Formwork to soffits of suspended slabs to fair finish the surfaces such as roof slab floor slab n. exc 200mm thickness all as specified and as directed by the Engineer -in - Charge. |
| 15 | Form work to chullah hoods, chajja's, trough and similar item including edges(rough finished flat surfaces of concrete ) all as specified. |
| 16 | Form work to edges of concrete flat, treads, breaks in floors, window cills, concrete railings, openings in concrere walls, floors and roofs not exceedings 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10cm but not exc 20cm wide(rough finished surface of concrete) all as specified. |
| 17 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 18 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 19 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 20 | Taking down cement plaster on brick work or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc. |
| 21 | M&L for Rendering in 15 mm thick on fair faces of brick work in layers, first layer 10 mm thick in cm 1:6 and second finishing coat 5 mm thick in cm 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces. Note : WPC shall be measured and paid separately. |
| 22 | M&L for Rendering in cement mortar 1:3, 5 mm thick on fair faces of ceiling surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for Rendering in CM 1:6,10mm thick on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | Supplying only Integral waterproofing compound |
| 25 | Applying white wash of 3 coats as in ceiling incl preparation of newly plastered surfaces as specified and directed. |
| 26 | M&L two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on new plastered walls surfaces Including 2 mm thick plaster of paris putty on new plastered surfaces walls complete all as specified. |
| 27 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified. |
| 28 | Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work including removal of rubbish complete all as specified and directed. |
| 29 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) |
| 30 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 31 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 32 | M&L for PCC 1:2:4 type B0 using 20 mm graded aggregate ,25mm thick as in sub base floor all as specified and as directed. |
| 33 | M &L Non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 34 | Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thick CM 1:3 complete all as specified and directed. |
| 35 | M &L Non skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed. |
| 36 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:3 on fair face of brick or concrete surface complete all as specified and directed. |
| 37 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc(laid, bedded and pointed in any mortar) all as specified. |
| 38 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed or bedding layer of CM 1:6, 15mm thick complete all as specified and directed. |
| 39 | Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 40 | M&L for Mirror polishing Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of CM 1:6, 15mm thick for laying floor finishes complete all as specified and directed. |
| 41 | M&L for Mirror polishing Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing set in CM 1:3, 10mm thick complete all as specified and directed. |
| 42 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed. |
| 43 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed. |
| 44 | Taking down shutters of any description exc. 1sqm but not exc. 2 sqm each including builders hardware as directed. |
| 45 | Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening |
| 46 | Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position (For hand rail) |
| 47 | S&F of Ist class Hardwood Handrails of size 100x75mm rounded or shaped with splayed faces in straight lengths and fixed in position. |
| 48 | M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed. |
| 49 | S & F 35mm thick 2nd class hardwood factory made Plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial Ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of railand stiles as per IS 1003 (Part I) kiln seasonel and chemically pressure trated |
| 50 | M&L for 35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed. |
| 51 | M&L for applying two coat of Synthetic enamel paint for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth as specified and directed. |
| 52 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed all as specified and as directed. |
| 53 | Dismantling boarding of any description, fixed in any position with nails |
| 54 | Cutting holes in brick walls built in cement mortar for inserting hold fast etc depth of embedded portion of hold fasts exc half brick but n exc one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concrete 1:2:4 type B1 for concreting of hold fasts. |
| 55 | M&L for preparing surfaces of wood and wood based material, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq.m but n.exc 0.5 sqm each. |
| 56 | M&L for preparing surfaces of steel surfaces, treating small articles such as stop, covers, gully gratings, holdfasts, end of posts, backs of chowkats, etc., area n. exc 0.1 sqm each. |
| 57 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. |
| 58 | S&F Factory made solid PVC molded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. |
| 59 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc. |
| 60 | S&F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified. |
| 61 | S&F aluminium handles cast type anodised 150 mm size. |
| 62 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 63 | S & F mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete all as specified and directed. |
| 64 | S&F Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring. |
| 65 | S & F Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 univrsal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg fixed in repairs |
| 66 | M& L mortice lock vertical type mild steel size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors, fixed in repairs. |
| 67 | M& L for 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative chioce lamination and other side balancing white lamination fixed with screws to timber frame work including dismantling of boards all as specified |
| 68 | M&L for 6mm thick external teak wood lipping over particle board fixed with nails complete all as specified and as directed. |
| 69 | S&F contineous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (when open) 30mm fixed as in repairs |
| 70 | Supply and Fix Locks, drawer, cupboard shutters grade I, size 75 mm Brass (2 levers) complete all as specified and directed. |
| 71 | M&L 40 mm brass dia cuboard knobs fixed with nuts ,screws and washers of mild steel, bright finished |
| 72 | S&F In repair Size of Hasp and staple of 125mm, alluminium anodised wire type stove enemalled black including bolt to hinges plate and fixed with screws all as specified. |
| 73 | M&L mild steel for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165. |
| 74 | M & L for dismantling wrought iron or mild steel work of any description not otherwise provided. |
| 75 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 76 | S&F fixing aluminium powder coated sliding window using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for aluminium wiremesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh locking arrangements etc complete all as directed. |
| 77 | S&F fixing aluminium powder coated ventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed. |
| 78 | M & L Aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clambs and fixed to wall PVC rawel plug and brass screws all as specified and as diredcted including dismantling of existing one of any description. |
| 79 | M & L Aluminium designer curtain rod brackets suitable for above. |
| 80 | Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) all as specified and as directed. |
| 81 | M & L for 75 mm thick plain cement concrete in 1:3:6 mix, type C2 using 40mm graded stone coarse agregate as in plinth protection. |
| 82 | M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on old plastered walls. Including applying plaster of paris putty of 2mm thick over plastered surface of wall all as specified. |
| 83 | Applying One coat of white wash as in ceiling incl preparation of old decorated surfaces as specified and directed. |
| 84 | M&L for applying one coat of Synthetic enamel paint for wooden surfaces including necessary preparation of old wooden surfaces of any description exc. 10cm width or girth as specified and directed. |
| 85 | Material and labour for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of new steel surfaces any description exc 10cm width or girth as specified and directed. |
| 86 | Material and labour for applying one coat of synthetic enamel paint including preparation of old steel surfaces any description exc 10cm width or girth as specified and directed. |
| 87 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia including breaking the existing pipe complete all as specified. |
| 88 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm dia including breaking the existing pipe complete all as specified. |
| 89 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floors or trnches 75mm dia including breaking the existing pipe complete all as specified. |
| 90 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors 110mm dia including dismantling the existing pipe and taking out of trenches complete all as specified. |
| 91 | Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed. |
| 92 | Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed. |
| 93 | Supply and Fix in repairs PVC (SWR) Vent cowl suitable for 110mm dia vent pipe complete all as specified and directed. |
| 94 | S&F in repairs PVC SWR branch piece single 'Y' equal or unequal 110mm bore with access door complete all as specified and directed. |
| 95 | S&F in repairs PVC SWR branch piece single 'Y' equal or unequal 75mm bore with access door complete all as specified and directed. |
| 96 | M & L for taking up or down old steel tubing of 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 97 | M & L for taking up or down old steel tubing of 20mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 98 | S & F of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified complete. (a) 16mm dia bore |
| 99 | S & F of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified complete. (b) 20mm dia bore |
| 100 | Supply, hoisting and fixing in position of 1000 litre capacity two layered Rotational Molded Polyethylene water storage tank (cylindrical vertical with closed top) all as specified in SSR Part- I including dismantling the existing PVC OHT as specified and directed. |
| 101 | S&F Ball brass valve for 20mm bore pipe high pressure with polyethylene float and fly nut complete screwed for iron pipe and fixed in repairs alll as specified and directed. |
| 102 | M & L Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 20 mm dia bore pipes and fixed in repair all as specified and directed. |
| 103 | S&F 15mm dia pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all as specified and as directed fixed in repairs. |
| 104 | S&F 15mm dia bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed fixed in repairs. |
| 105 | S&F in repair 15mm PVC connection 450mm long of superior quality as specified. |
| 106 | S&F Brass chromium plated shower rose of size 75mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe and completed all as specified and as directed fixed in repair |
| 107 | S& F Brass chromium plated stainless steel towel rail, 20 mm dia 'D' type, 60 mm long between flanges and fixed in repairs. |
| 108 | S & F Grating round 140mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed fixed in repair |
| 109 | S&F Vitreous china Wash Hand Basin, white, flate back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out including brackets fixed in repairs. |
| 110 | S & F Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe ) and fixed in repairs. |
| 111 | S&F PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction and as directed by the Engineer-in-Charge including removal of existing cistern etc. |
| 112 | S&F plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device in repair. |
| 113 | Supply and Fix looking mirror 600mm x 450mm beveled edge on selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cub washers and framed with aluminium channel all round etc., |
| 114 | S & F In repair Towel ring PTMT of fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 90 Gms) |
| 115 | S&F in repairs stainless steel sink over all size 915x460 mm and bowl size with draining board and bowl size 410x330x160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets all as specified and as directed. |
| 116 | Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per Cat NoBEA-97 Make : Prayag |
| 117 | Supply and fix toilet paper holder with flap recessed type matt chromium plated as per cat No.BA-38 of Make : Prayag all as specified and directed. |
| 118 | S&F in PVC waste pipe for wash hand basin (size 31/32mm x 900mm length) Make : Prayag Cat No.327 all as speified and directed |
| 119 | S&F in PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length) Make : Prayag Cat No.330 all as speified and directed |
| 120 | Supply and fix in repair of brass chromium plated 15mm wall mixer valve ( 2-in-1) with L Bend as per Cat No.8375 of Make : Prayag |
| 121 | S&F In repair15mm dia angle cock with flange, chromium plated as per Cat No.8310 Make : Prayag |
| 122 | S&F in repair 15mm dia Sink cock with flange, chromium plated as per cat No8716, Make : Prayag |
| 123 | S&F In repair Tumbler holder with glass as per Cat No.BA-26N, Make : Prayag |
| 124 | S&F In repair 32mm brass full thread SS waste coupling for wash hand basin as per Cat No.BE-11,Make : Prayag |
| 125 | S&F in repair CP brass waste coupling 40mm full thread for kitchen sink Cat No BEA-16B |
| 126 | Supply and fix in repair soap dish ,matt finished chromium lated (MCH/Colour) as per Cat No.BA-05G of Make : Prayag all as specified and directed. |
| 127 | S & F in repair corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings as per cat No. BEA-44of make : Prayag all as specified and directed. |
| 128 | Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings as per Cat No.BEA-45 of make : Prayag all as specifid and directed. |
| 129 | S&F in repair 15mm dia bib cock long body with flange, chromium plated as per cat No-8308, Make : Prayag |
| 130 | Supply and fix Stailness steel plate rack of size (36'' x 36 \\" 10\\") with separators and 3 tier shelves, provisionsing of hook 9 Nos made out of stailness steel sheet of grade AI SI 304 as per CAT No 350 of Make Prayag and fixed in repairs all as specified and directed. |
| 131 | S&F in repair 15mm dia 2 way angle cock with flange, chromium plated as per cat No.8311, Make : Prayag |
| 132 | S&F in repair CP square trap (101mmx101mm) with waste hole as per cat No.FT-73 Make : Prayag |
| 133 | S&F in repair PVC cabinet mirror PTMTof size 400 x 500mm with sided shelves fancy type of superior quality as per cat No.554 , Make : Prayag complete all as specified and as directed. |
| 134 | S&F in repair 15mm dia CP bib cock nozzle with flange(washing machine tap)as per cat No.8305, Make : Prayag |
| 135 | Removing the building materials upto 2km etc obtained from demolition (other than soil obtained from excavated) to outside of MoD land as complete all as specified & directed. |
| 136 | M&L Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces after Complete removal of existing treatment complete all as specified and directed. |
| 137 | M&L Preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 138 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 139 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLSH), ISI-694 marked drawn through in and including non metalic heavy duty, PVC concealed conduit of minimum 20 mm bore in wall/ floor and fixed on ceiling/ roof etc after cutting, chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including pressed steel modular sunken boxes of suitable size with minimum thickness 2mm duly concealed in walls for housing of modular switches, switch socket outlets, fan regulator etc including provn of PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLSH) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light/fan/bell point controlled by one switch. (Note- Piano switch and sockets will be measured and paid separately) :-(a)One light point controlled by one switch |
| 140 | One fan point controlled by one switch |
| 141 | One 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 142 | One 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 143 | One bell/buzzer point controlled by one bell push |
| 144 | As per above items No 3 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complet all as specified and directed. |
| 145 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLSH), ISI-694 marked drawn through in , under existing non metalic PVC concealed conduit of minimum 20 mm bore in wall/ floor and fixed on ceiling/ roof etc including provn of PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLSH) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light/fan/bell point controlled by one switch. (Note- Piano switch and sockets will be measured and paid separately) :-one light point controlled by one switch |
| 146 | one fan point controlled by one switch |
| 147 | one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 148 | one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 149 | As per above items No 5 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complet all as specified and directed. |
| 150 | S& F for modular white cover plate with frame 3 module complete all as specified and directed |
| 151 | S& F for modular white cover plate with frame 4 module complete all as specified and directed |
| 152 | S& F for modular white cover plate with frame 6 module complete all as specified and directed |
| 153 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed |
| 154 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed |
| 155 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed |
| 156 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed |
| 157 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed |
| 158 | S&F modular bell switch suitable for type AC 240V, 16 amps complete all as specified and directed |
| 159 | S&F call bell of multi music type A/C 230 volts complete all as specified and directed |
| 160 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed |
| 161 | Taking down ceiling fan and exhaust fans of any size and any description including connected accessories and deposited in AGE E/M store complete all as specified and directed. |
| 162 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor, complete all as specified and directed |
| 163 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers , complete all as specified and directed |
| 164 | S&F lamp holder insulated body with back plate for batten fittings/angle holder |
| 165 | S&F of LED bulb 9 w high sutable for lamp holder complete all as specified and as directed by the Engineer-in-Charge. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP/Philips /Bajaj. |
| 166 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or equivalent Philips/Bajaj. |
| 167 | S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or equivalent Philips/Bajaj. |
| 168 | S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs, complete all as specified and as directed by the Engr-in-Charge Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or equivalent to Philips/Bajaj. |
| 169 | Taking down sub main wiring any type and any size complete after taking proper disconneting of electric supply properly and making good surface complete all as specifided and directed |
| 170 | S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade FRLSH type drawn through new non metalic rigid PVC conduit pipe 25 mm dia concealed in wall alongwith accessories fixed on walls/floors/ceiling after cutting, chasing the wall etc and making good of disturbed surface, with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit pipe of 25 mm dia including accessories shall be measured as one length. |
| 171 | Taking down MCB DB of any type and any size complete after taking out and proper disconneting the electric supply and making good surface complete all as specified and directed |
| 172 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 4 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection |
| 173 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 12 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one. |
| 174 | Taking down MCCB/MCB any type and any size complete after taking proper disconneting of electric supply properly and making good surface complete all as specifided and directed |
| 175 | S&F MCB TPN 63 Amps 415 Volts complete all as specified and directed |
| 176 | S&F MCB of SPN 40 Amps 240 Volts complete all as specified and directed |
| 177 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed |
| 178 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender