Tender For Repair And Maintenance Of Roads At Odtd, Shivaji Enclave And External Road At Odtd Under Ge Dehu Road
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Roads At Odtd, Shivaji Enclave And External Road At Odtd Under Ge Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm all as specified and directed. |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth of potholes exc 50mm and n exc 100mm deep complete all as specified and direted. |
| 3 | M & L Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spread, rolled and consolidating to required gradient and camber complete all as specified and directed |
| 4 | M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen) at the rate of 7.5 Kg per 10 Sqm complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for preparing Black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen) at the rate of 5 Kg per 10 Sqm complete all as specified and directed by Engr-in-Charge |
| 6 | M & L for premixed bituminous macadam using paving bitumen @ 4% by weight of total mix spread rolled and compacted to required gradient and camber for upto 50 mm consolidated thickness all as specified and directed, |
| 7 | M &L for preparing new Bituminous macadam Surface and applying evenly a priming/tack coat with bituminous primer (paving bitumen) at the rate of 2.5 Kg per 10 Sqm complete all as specified and directed by Engr-in-Charge |
| 8 | M & L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 9 | M & L for moorum filling in berms of road laid in layers spread levelled and rammed including watering and well ramming with power road roller of spread thickness 100 mm complete all as specified and directed by Engr-in-Charge |
| 10 | M & L for marking for preparing bituminous surfaces of road and marking 2.5mm thick center lines, stop lines, dashes, arrows etc and the like n exc 10cm wide on roads pavement with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed by Engineer-in-Charge |
| 11 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector of model No. DA 972.0 or equivelent fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 12 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design confirming to IP65 standards) of size 125mm x 125mm x 25mm (anchoring shank 65mm) of equipped with high efficiency Mono crystaline solar panel 2.4V/ 0.3 watt one NI-MH rechargeable battery (1.2V/1600MAh) consisting of super bright LED with luminious intensity of 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 13 | Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender