Tender For Repairs To Joinery, Flooring, Roofs, Plumbing Works And Other Connected Works At Certain Location At New Mil Stn Under Ge Gangtok
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Flooring, Roofs, Plumbing Works And Other Connected Works At Certain Location At New Mil Stn Under Ge Gangtok
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter of any description (without taking down shutter from the frame) not exc. 1.5 Sqm each and removing from site complete all as directed. |
| 2 | Taking down chowkats or frames with shutter of any description (without taking down shutter from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site complete all as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and removal from site complete all as directed. |
| 4 | Taking down shutters of any description n exc 1 Sqm each and removal from site complete all as specified and as directed. |
| 5 | Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as directed |
| 6 | M&L for 2nd class hard wood scantling, timber fixed clean swan complete all as specified & as directed. |
| 7 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 8 | S&F factory made 35 mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 9 | S&F 35mm thick 2nd class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed. |
| 10 | S&F 30 mm thick Flush door shutter, solid core construction, with block board core and plywood face panels. Commercial type on one side and other face covered with decorative face veneer with 6mm thick teak wood lipping / frame to match complete all as specified and as directed. |
| 11 | S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing complete all as specified and directed. |
| 12 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified & directed. |
| 13 | S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 14 | S&F 150 mm long aluminium anodised handles, cast type, complete all as specified and directed |
| 15 | S&F 100 mm long aluminium anodised handles, cast type, complete all as specified and directed |
| 16 | S&F 100mm long brass handles (decorative type), cast type, polished bright complete all as specified and directed. |
| 17 | S&F 150mm long aluminum anodised tower bolts of extruded section and fixed complete all as specified and directed. |
| 18 | S&F 100mm long aluminum anodised tower bolts of extruded section and fixed complete all as specified and directed. |
| 19 | S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified. |
| 20 | S&F 75mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified. |
| 21 | S&F 50mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified. |
| 22 | S&F continuous ( piano) hinges with 30mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and directed. |
| 23 | S&F factory made steel windows with side hung shutters openable type including projective type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces complete all as specified and directed. |
| 24 | S&F factory made steel ventilator with top hung shutter including hinges ,steel peg stay complete complete all as specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 26 | S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 all as specified and directed. |
| 27 | S&F in repairs 25mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 28 | S&F in repairs of 18 / 19mm thick particle board medium density flat pressed,single layer type with BWR type adhesive fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified and directed. |
| 29 | S&F 4mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and directed. |
| 30 | M&L for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 31 | M&L for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 32 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed. |
| 33 | S&F 8-9mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cover,F/J edge trims where required fixed with hidden screws to and including suitable steel/wooden frame work of width 75mm complete all as per manufacturer's instructions & specified and as directed. |
| 34 | S&F aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and as directed. |
| 35 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 36 | M&L Rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations all as directed by Engr in charge |
| 37 | S&F in repairs 15mm bore chromium plated brass mixer for mixing hot and cold water for wash basin screwed down for dia iron pipe complete all as specified and directed. |
| 38 | S&F for magnetic cupboard catcher made of high quality stainless steel complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender