Tender For Certain B/R Repairs To Sagar Vihar, Navy Park Area, Phoenix Bay View, Jcda, Nscb And Other Minor Units Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
Tender Value
43 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repairs To Sagar Vihar, Navy Park Area, Phoenix Bay View, Jcda, Nscb And Other Minor Units Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall/ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets cmplete all as specified and directed. |
| 2 | M&L for seamless designed gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philips head with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distember with roller finish over a coat of chalk whiting primer cmplete all as specified and directed. |
| 3 | M & L for anodised aluminium snap grid frame work for false ceiling 605mm x 605mm using aluminum anodised sections as specified in SSR Part I 1991 including cutting, drilling, jointing etc complete including provn of 3-6 mm dia GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards of approved make, 605mm x 605mm size duly applied with two coats of oil bound distember over a coat of primer complete all as specified and as directed. |
| 4 | Dismantling wood boarding,panels,beams or any description, fixed any position with nails complete all as specified and as directed. |
| 5 | M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard, wall with finish to match all adjoining surfaces including sanding and applying mixture of filler and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed.Make of Rubber Wood members : RUBCO/ India Wood or equivalant |
| 6 | M & L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete |
| 7 | M & L for 18mm thick HDF boarding (Fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site, complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/ Greenply/ Amnchidply / or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed. |
| 8 | S & F stainless steel auto closing hinges of standard size complete all as specified and directed |
| 9 | S & F stainless steel 150mm cupboard handles complete all as specified and directed |
| 10 | S & F stainless steel 100mm tower bolt complete all as specified and directed |
| 11 | S & F Magnetic door catcher for cup board complete all as specified and directed |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 13 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.Note: Over lap shall be provided as specified by the manufacture. all as specified and directed. |
| 14 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering including taking out old wind tie complete all as specified and directed |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 17 | S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed |
| 18 | M&L for Band strap, supports stays for rain water, ventaling pipes including bolts, if required, hooks (stay), heavy for large gates, hook and pintel hinges, hild fasts, hookes for hanging fan, plain angle cleats for securing purline to wood truses or rafter knee pieces inserts, two way and three straps, plate washer and similar small articles conforming to Fe-410-0 complete all as specified and directed |
| 19 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works including ornamental and intricate design conforming to Fe-290, Gde-E-165 all as specified and as directed. |
| 20 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 21 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:4 including grinding and polishing, etc completed all as specified and as directed. |
| 23 | Demolition of cement concrete block masonry on any description complete all as specified and directed. |
| 24 | M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6), etc completed all as specified and as directed. |
| 25 | Taking down cement plaster on walls in cement mortar, including raking out joints, hacking for keys and scrubbing down with water etc complete as preperatory to receive new plaster all as specified and directed by Engr-in-Charge. |
| 26 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface fair and even without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 27 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 completed all as specified and as directed. |
| 28 | Supply only integral waterproofing compound. |
| 29 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistent primer completed all as specified and as directed. |
| 30 | M&L for preparation of new plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer all as per manufacturers instruction, completed all as specified and as directed. |
| 31 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each & removing to store completed all as specified and as directed. |
| 32 | Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shurtters from the frame) and removing to store completed all as specified and as directed. |
| 33 | Taking down chowkats or frames (without taking down Shutters from frame) size n exc 1.5 sqm each completed all as specified and as directed. |
| 34 | M&L for second class hard wood plain solid straight chowkats and frames wrought formed on the solid rounded or chanbered put together with glue and pinned at joints including preservative treatment completed all as specified and as directed. |
| 35 | M&L for second class hard wood 35 mm thick plain frames panelled door shutters (any number of pannels) with of veenerred particle boardmedium density wood particle boards with commercial face supplied and fitted to chowkats completed all as specified and as directed. |
| 36 | S&F 35 mm thick glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8023 (a), in II nd class hard wood completed all as specified and as directed. |
| 37 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 38 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5 mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass completed all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose |
| 39 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 40 | S&F Factory made single extruded WPC (Wood PolymerComposite) UV coated solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, in kitchen cupboards and room wardrobes shutter all as per direction of Engineer. Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) |
| 41 | M&L for aluminium partition, window and door with frame and shutters fully or partly glazed , sliding / openable / fixed / fully glazed and pannels with 12mm thick pre-laminated partical board including all fittings (supply only floors spring, glass, Imax hinges, partical board, gauze will be measured separately) the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I. including taking down old partition |
| 42 | Supply only stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed. |
| 43 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and as directed |
| 44 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed |
| 45 | S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet & edges will be painted to match with printed sheets rainforced sheet M.S square tube complete all as specified and directed. |
| 46 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 47 | S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type, anodised/Powder coated all as specified |
| 48 | S&F in repairs 100mm size stainless steel butt hinges medium weight complete all as specified |
| 49 | S&F in repairs 200mm aluminium, anodised/Powder coated, barrel tower bolts of extruded section all as specified |
| 50 | S&F 250 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified |
| 51 | S&F in repairs door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed. |
| 52 | Hacking out old broken glass(any thickness, size, quality or description) from wooden frames /steel frame/aluminium frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed . |
| 53 | Supply only 4mm thick sheet glass, ordinary quality in squares n.exc 0.5Sqm in each pane complete all as specified and directed. |
| 54 | Supply only 5.5 mm thick sheet glass, ordinary quality in squares n.exc 0.5Sqm in each pane complete all as specified and directed. |
| 55 | S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 56 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed |
| 57 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 58 | M&L for complete removal of old decorated surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.cornices and applying two coat of antifungal exterior emulsion paint including one coat of primer complete all as specified and as directed.. |
| 59 | M&L for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty of minimum 1mm thickness complete all as specified and as directed. |
| 60 | M&L for preparation of old decorated surfaces of walls and cornices by broomingn down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 61 | M&L for preparation of old surfaces of ceilings and cornices by broomingn down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed. . |
| 62 | S&F in repairs for any colour fancy type curtain rods with design head of both side of the curtain rod complete all as specified and directed. |
| 63 | S & F in repairs of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site complete all as specified and directed. |
| 65 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 66 | M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 67 | M&L for light shade vitrified ceramic coloured tiles of polish area of each tiles not exceeding 0.36 Sqm, 9 to 10 mm thick in floor, dado, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified |
| 68 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on vertical surface as skirting and dado, wall etc. complete over 10mm thick backing coat rendering in CM 1:3 complete all as specified. |
| 69 | M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed. |
| 70 | Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if required complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 72 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 73 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed |
| 74 | S&F in repairs SS grating 125mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete all as specified and directed |
| 75 | Taking up or down 15 mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 76 | S&F in 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified and as directed. |
| 77 | S&F 20mm outer dia union complete all as specified and directed. |
| 78 | S&F 20 mm outer dia Brass Tee complete all as specified and directed. |
| 79 | S&F 20 mm outer dia CPVC pipes brass Elbow complete all as specified and directed. |
| 80 | S&F 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 81 | Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and direct |
| 82 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 83 | S&F 25 mm outer dia union complete all as specified and directed. |
| 84 | S&F 25 mm outer dia Brass Tee complete all as specified and directed. |
| 85 | S&F 25 mm outer dia CPVC pipes brass Elbow complete all as specified and directed. |
| 86 | S&F 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 87 | S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge |
| 88 | S&F 15mm PVC connection 600mm long with brass check nut on both sidies screw to iron pipes complete all as specified and as directed |
| 89 | S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directedMake : Jaquar Cat part No CON-053KN or equivalent in Soma / Leader Zoloto / Prayag |
| 90 | S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed .Make : Jaquar Cat No Con 167KNB or equivalent |
| 91 | S&F in repairs CP Single Towel Rail 600 mm long complete all as specified and directed.Make : Jaquar (Cat Part No. AQN 7711) or equivalent |
| 92 | S&F in repair Health Faucet with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Jaquar Code : ALD-CHR-5771 or equivalent |
| 93 | S&F in repair bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat part No CON-107KN or equivalent in Soma / Leader Zoloto / Prayag |
| 94 | S&F in repairs vitreous china wash down water closet pane (pedestal pattern white) standared size with 'S' or 'P' approved brand complete all as specified and directed.. |
| 95 | S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified |
| 96 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed |
| 97 | S&F for fixed in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock, CI bracket 15mm dia polythene connection 450mm long, 32mm dia waste coupling and 32mm dia PVC waste pipe 450mm long etc. complete all as specified, including taking down the existing wash hand basin all as specified and directed. |
| 98 | S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia flexible pipe suitable for WHB/sink/urinal etc complete all as specified ans directed |
| 99 | S & F in repairs vitreous china wash down water closet pane (Pedestal pattern white) standard size with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified and directed.Make : Jaquar Cat Part No (LYS WHT 0314) or Equivalent.. |
| 100 | S&F in repair vitreous china table top wash hand basin square shape of size 530x420mmx140mm including 32 mm CP waste fittings all necessary inlet and outlet connections complete all as specified and as directed.Make : Jaquar (Cat Part No : JDS WHT 25907N or equivalent in Prayag/Parryware |
| 101 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 102 | M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors complete all as specified and directed. |
| 103 | M&L for heavy duty Non skid tiles of size 300x300x9mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 104 | M & L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs as directed Please Enable Macros to View BoQ information |
| 105 | M & L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender