Tender For Repair/Maintenance Of Buildings At Itarana Palace, Military Station Alwar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Buildings At Itarana Palace, Military Station Alwar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including demolition of all quoins, arches, pillars, piers, jambs, copings and precast concrete masonry/block work, including breaking into convenient sizes, removal of debris and all incidental labour, tools, plant and equipment required for complete execution as specified. |
| 2 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius, in half brick thick walls, laid in cement mortar 1:4, including soaking of bricks, preparation of mortar, proper bonding, raking of joints for plastering where required, scaffolding, curing and all labour, materials, tools and equipment complete as specified. |
| 3 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6, including soaking of bricks, preparation and laying of mortar, proper bonding, jointing, curing, scaffolding and all labour, materials, tools and equipment complete as specified. |
| 4 | Taking down cement or cement-lime plaster of any description from brick or stone masonry, including raking out joints, hacking the surface for key, scrubbing down with water and cleaning the exposed surface, including all labour, tools, plant and equipment and disposal of dismantled plaster/debris as specified; rate shall include work at any height and location, including scaffolding and all necessary equipment complete. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4 including WPC @ 3% by weight of cement, on stone or brick masonry, finished even and smooth without using extra cement, including preparation of surface, application, curing, scaffolding and all labour, materials, WPC, tools and equipment required for complete execution at any height and location as specified. |
| 6 | M&L for 10 mm thick cement plaster in cement mortar 1:6 on surfaces other than fair faces of brick work or concrete, finished even and smooth without using extra cement, including preparation of surface, application, curing, scaffolding and all labour, materials, tools and equipment required for complete execution at any height and location as specified. |
| 7 | M&L for rendering 5 mm thick in cement mortar 1:3 to ceilings, finished even and smooth without using extra cement, including preparation of surface, application, finishing, curing, scaffolding and all labour, materials, tools and equipment required for complete execution at any height and location as specified. |
| 8 | M&L for preparation of newly plastered wall and ceiling surfaces and application of two coats of oil emulsion distemper over one coat of suitable primer, including application of 2 mm thick elastomeric wall care putty on walls, preparation by cleaning, rubbing down and making good minor surface imperfections, sanding between coats and complete finishing; paint shall be Asian/Berger/Nerolac or equivalent approved make, including scaffolding, labour, materials, tools and equipment for work at any height and location complete as specified. |
| 9 | M&L for preparation of old plastered wall and ceiling surfaces including removal of mortar drops, smoke and soot deposits, mould, moss, efflorescent salts, tar/oil/grease spots and other loose or defective material by scraping, wire brushing/grinding machine or other suitable means, followed by cleaning and preparation of the surface, application of one coat of suitable primer, 2 mm thick white wall care putty and two coats of oil-bound emulsion distemper (OBD) of approved shade/tint, including sanding and making good minor surface defects, scaffolding, labour, materials, tools and equipment for work at any height and location complete as specified. Make: Asian/Berger/Nerolac or equivalent approved make. |
| 10 | M&L for preparing newly plastered wall surfaces and applying two coats of exterior grade emulsion paint over one coat of suitable exterior primer and 2 mm thick exterior wall care putty, including surface preparation, sanding, making good minor imperfections and finishing complete, using Asian/Berger/Nerolac or equivalent approved make, including scaffolding, labour, materials, tools and equipment for work at any height and location complete as specified. |
| 11 | M&L for preparing old plastered wall surfaces and applying two or more coats of exterior grade APEX/WEATHER type emulsion paint over 3 mm thick exterior wall putty, including thorough cleaning, scraping, wire brushing/grinding where necessary, making good surface defects, application of one coat of suitable exterior primer and subsequent coats of exterior emulsion paint, including scaffolding for application up to fourth-storey building height, all labour, materials, tools and equipment complete as specified. Make: Asian/Berger/Nerolac or equivalent approved make. |
| 12 | Dismantling existing floor, hearth and wall tiling, carefully removing serviceable tiles without unnecessary damage wherever practicable, including breaking/removing bedding and mortar, stacking serviceable tiles at designated location, clearing the area and removal of debris/rubbish, including all labour, tools, plant and equipment complete as specified. |
| 13 | M&L for glazed coloured ceramic wall tiles of size 300 x 600 x 7 mm thick on vertical surfaces, laid over and including 10 mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry, with joints pointed in white or coloured cement matching the tile shade, including cutting, fitting around openings, corners and projections, surface preparation, curing, scaffolding and all labour, materials, tools and equipment complete as specified. Make: Kajaria/Johnson/Orient Bell or equivalent approved make. |
| 14 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, square or rectangular, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, laid on floors and similar surfaces over and including 10 mm thick rendering/bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile shade, including cutting, laying to required line, level and slope, surface preparation, curing and all labour, materials, tools and equipment complete as specified. Make: Kajaria/Johnson/Orient Bell or equivalent approved make. |
| 15 | M&L for vitrified tiles 8 to 10 mm thick, square or rectangular, polished and coloured in light shade as approved, area of each tile not exceeding 0.36 sqm, laid on floors and similar surfaces over and including 15 mm thick screed bed in cement and sand mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement matching the tile shade, including cutting, edge finishing, laying to required line, level and slope, surface preparation, curing and all labour, materials, tools and equipment complete as specified. Make: Kajaria/Johnson/Orient Bell or equivalent approved make. |
| 16 | All as per preceding item for glazed coloured ceramic wall tiles, but for skirting/dado work, including 10 mm thick backing/rendering in cement mortar 1:4, properly set, aligned and jointed in neat cement slurry and pointed in white or coloured cement matching the tile shade, including cutting, edge finishing, corners, junctions, surface preparation, curing, scaffolding and all labour, materials, tools and equipment complete as specified. Make: Kajaria/Johnson/Orient Bell or equivalent approved make. |
| 17 | M&L for 25 mm thick PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate as sub-base for flooring, including preparation of base, laying, compacting, levelling, finishing and curing, including demolition/removal of existing floor or sub-base wherever required, disposal of debris and all labour, materials, tools, plant and equipment complete as specified. |
| 18 | M&L for vitrified ceramic light-shade tiles 9 to 10 mm thick, square/rectangular, polished, area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm, laid on floors and similar surfaces in any approved pattern, set and jointed in neat cement slurry and pointed in white or coloured cement matching the tile shade, over and including 15 mm thick cement screed in CM 1:6; including where used on vertical surfaces such as skirting, 10 mm thick cement plaster in CM 1:4 as backing coat, including cutting, edge finishing, alignment, levelling, curing and all labour, materials, tools and equipment complete as specified. Make: Kajaria/Johnson/Orient Bell or equivalent approved make. |
| 19 | Demolition of stone slabs of any description and thickness in floors, aprons, platforms and similar surfaces, laid, bedded or pointed in any mortar, including breaking and taking down slabs, removal of bedding material, cleaning the base, stacking/removal of debris and all labour, tools, plant and equipment complete as specified. |
| 20 | M&L for 18 to 20 mm thick granite of approved type, table-rubbed and polished, for steps, jambs, pillars, window cills, cooking platforms and similar works, laid over and including 15 mm thick screed/bedding layer in cement mortar 1:3 and fixed in cement mortar 1:4, including cutting, dressing, matching of joints, pointing with white cement 1:2 mixed with marble dust and suitable pigment to match the granite shade, grinding and polishing of exposed edges to required curved/surface finish, including all labour, materials, tools and equipment complete as specified. |
| 21 | Taking down existing chowkats/frames with shutters without removing shutters from the frames, each opening not exceeding 1.5 sqm in area, including removal of holdfasts, fasteners and associated fittings, taking down carefully, making good the resultant masonry/plaster surfaces and clearing debris, including all labour, tools and equipment complete as specified. |
| 22 | Taking down existing chowkats/frames with shutters without removing shutters from the frames, each opening exceeding 1.5 sqm but not exceeding 4.0 sqm in area, including removal of holdfasts, fasteners and associated fittings, taking down carefully, making good the resultant masonry/plaster surfaces and clearing debris, including all labour, tools and equipment complete as specified. |
| 23 | Taking down existing door/window shutters exceeding 1.0 sqm but not exceeding 2.0 sqm in area per shutter, including removal of hinges, bolts and other associated fittings, taking down carefully, stacking serviceable material as directed, making good the affected surfaces and clearing debris, including all labour, tools and equipment complete as specified. |
| 24 | Providing and fixing factory-made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter, 30 mm thick, comprising virgin polymer of K value 58-60 (suspension grade), calcium carbonate, natural fibres such as wood powder/rice husk/wheat husk and non-toxic additives having maximum toxicity index of 12 per 100 gms, minimum density 650 kg/cum, screw withdrawal strength minimum 1800 N (face) and 900 N (edge), minimum compressive strength 50 N/mm², modulus of elasticity minimum 850 N/mm² and resistance to spread of flame Class A, termite/borer proof, water/moisture proof and fire retardant; shutter to be laminated on both faces with minimum 14 micron thick PVC foil of approved design using hot-melt adhesive, including providing and fixing three stainless steel butt hinges per shutter of required size with full-body threaded star-headed countersunk stainless steel screws and all necessary fittings, cutting, fixing, alignment and making good complete as specified. |
| 25 | Providing and fixing factory-made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory window and other frames/chowkats of size 45 x 70 mm, comprising virgin polymer of K value 58-60 (suspension grade), calcium carbonate, natural fibres such as wood powder/rice husk/wheat husk and non-toxic additives having maximum toxicity index of 12 per 100 gms, fabricated with mitred joints using PVC solvent cement and fixed with full-body threaded star-headed stainless steel screws; frame having minimum density 750 kg/cum, screw withdrawal strength minimum 2200 N (face) and 1100 N (edge), minimum compressive strength 58 N/mm², modulus of elasticity minimum 900 N/mm² and resistance to spread of flame Class A, termite/borer proof, water/moisture proof and fire retardant, including fixing in position with MS holdfasts/lugs or stainless steel dash fasteners of required diameter, necessary cutting and drilling, making good surrounding masonry/plaster and complete fixing, alignment and finishing as specified. |
| 26 | S&F powder-coated aluminium door shutters with powder coating not less than 50 micron thick, using aluminium sections weighing approximately 0.55 kg/m, including necessary joining cleats, glazing clips, rubber/neoprene packing, two handles per door, hinges, anodised aluminium snap beading, screws and all necessary fittings and accessories, including cutting, fixing, alignment, glazing provisions and making good complete as specified. |
| 27 | S&F aluminium windows comprising fly-proof shutter and glazed shutter, both fabricated from 1.59 mm thick powder-coated aluminium sections with powder coating not less than 50 micron, including necessary jointing cleats, glazing clips, rubber/neoprene packing for fixing 4 mm thick glass, galvanised mild steel wire cloth of 0.56 mm nominal wire diameter and average aperture width 1.18 mm, aluminium handles 2 Nos. of 100 mm length, hinges, tower bolts and all necessary fittings; including 12 mm MS square bar guard grill with flat iron strip frame, fixed to aluminium frame or adjoining wall, complete with all cutting, drilling, fixing, alignment and making good. Aluminium sections shall be: outer main frame 125 x 45 x 2 mm thick; shutter frame 44 x 44 x 1.59 mm thick. Overall opening size shall be measured for payment purposes only. Rate shall include 4 mm glass, 12 mm MS grill and wire mesh, complete as specified. |
| 28 | S&F powder-coated aluminium frames of approved colour for doors, windows, partitions and ventilators, with powder coating not less than 50 micron thick, comprising aluminium sections with one or more rebates as required, including necessary joining cleats, screws, fixing accessories and provision for fixing all necessary fittings, complete with cutting, drilling, alignment, fixing and making good as specified. |
| 29 | S&F stainless steel wire cloth of 0.36 mm nominal wire diameter and average aperture width of 1.40 mm, accurately cut and fixed to existing wooden, steel or aluminium frames using tinned tacks or galvanised wire staples, including suitable beading where required, tensioning, trimming and all labour, materials, tools and accessories complete as specified. |
| 30 | S&F 5.5 mm thick selected-quality tinted sheet glass, each pane exceeding 0.5 sqm in area, fixed in aluminium framework with approved rubber/neoprene glazing beading and necessary clips, including cutting to required size, edge finishing, handling, fixing and all labour, materials, tools and accessories complete as specified. |
| 31 | Providing and fixing factory-made uPVC white-coloured casement (openable) door/window fabricated from extruded uPVC profiles having wall thickness 2.3 mm ± 0.2 mm, comprising hollow multi-chamber profiles with frame size 60 x 58 mm, sash size 60 x 78 mm and intermediate T-profile size 60 x 71 mm, including glazing beads, drilling of necessary holes for fixing hardware and drainage of water, EPDM gaskets, and galvanised steel reinforcement sections of minimum 0.2 mm thickness comprising frame 28 x 21.5 mm, sash 31 x 27 mm and T-profile 27 x 17 mm, inserted into the respective uPVC profiles; frame fixed to wall with 8 x 100 mm long fasteners; complete with both-side casement door handles of zinc alloy, white powder coated, corner strikers, cylinder, mild steel door transmission gear with multipoint locking system and strikes, 3D zinc-alloy hinges white powder coated and 8 mm thick selected-quality glass, including all necessary hardware, accessories, cutting, drilling, fixing, sealing, alignment and making good complete as specified. Rate shall include cost of glass and all connected accessories including film/tinted glass wherever specified. |
| 32 | M&L for false ceiling using GI snap grid system roll-formed from hot-dip galvanised steel sections with powder-coated finish, comprising main runners 38 x 24 mm, cross tees 29 x 24 mm and wall angles 24 x 24 mm, suspended from RCC roof/structural soffits with 4 mm dia GI suspension wires and suitable angle cleats, capable of carrying maximum load up to 8.10 kg/sqm, complete with 4 mm thick designer pre-painted cement fibre ceiling boards of size 595 x 595 x 4 mm of approved texture such as Lake, Hill, Ocean Cascade or Electra, including cutting, fixing, levelling and finishing to required line, level and shape in accordance with manufacturer's recommendations, including dismantling and removal of existing Everest ceiling and grid system, all labour, materials, scaffolding, tools and equipment for work at any height complete as specified. Grid system: Regular T-2430 or equivalent. Make: Ramco/Charminar/Armstrong or equivalent approved make. |
| 33 | M&L for solid PVC wall lining comprising 5 mm thick plain-coloured PVC sheets, fixed at site with approved solvent cement over PVC framework as per specifications and drawings, including PVC profile corner beading of L/T type matching the colour/shade of wall panelling, 5 mm thick PVC fillets 35 mm wide, complete PVC framework with battens at maximum 300 mm centres securely fixed to walls, including cutting, fitting, jointing, corner treatment, dismantling/removal of existing wall lining wherever required, making good the affected surfaces and all labour, materials, fasteners, solvent cement, tools and equipment complete as specified. |
| 34 | S&F stainless steel barrel tower bolt 200 mm long, stove-enamelled black finish with bright stainless steel bolt, including necessary screws, fixing accessories and complete installation to door/window shutter as specified. |
| 35 | S&F stainless steel oval-type handle 150 mm size, stove-enamelled black finish, including necessary screws, fixing accessories and complete installation as specified. |
| 36 | S&F in repair 140 mm long floor door stopper with aluminium alloy body and tongue, anodised finish, fitted with hard-drawn steel spring and vulcanised rubber buffer, securely fixed to floor with suitable screws/fasteners, including drilling, fixing and making good complete as specified. |
| 37 | S&F in repair aluminium extruded-section body hydraulic door closer, universally adjustable and hydraulically regulated, Designation No. 3, suitable for door shutters 851 to 1000 mm wide and weighing 61 to 80 kg, including complete mounting accessories, screws, brackets, adjustment and testing for smooth and controlled opening/closing, complete as specified. |
| 38 | S&F in repair rimless single-piece WC pan with polypropylene soft-close slim seat cover, hinges, dual-flush cistern/flushing system fittings, fixing accessories and complete accessory set, size approximately 370 x 665 x 750 mm, including fixing bolts, connection to existing drain/outgoing soil pipe, necessary jointing materials, sealing and making good complete as specified. Make: Jaquar/ Kohler/Grohe or equivalent approved make. |
| 39 | S&F in repair stainless steel curtain rod of 25 mm internal diameter and required length, including matching finials at both ends and one pair of stainless steel brackets securely fixed to walls/beams at both ends with necessary screws and fasteners, including taking down existing curtain rod and brackets where required, making good and complete installation as specified. |
| 40 | S&F in repair stainless steel kitchen sink with integral drainage board, fabricated from minimum 1 mm thick stainless steel sheet, overall minimum size 915 x 460 mm with bowl size 410 x 330 x 160 mm, including plugs, washers and waste fittings, fixing on cast iron cantilever brackets, bedding in cement mortar, fixing to dwarf wall, connecting union to pipe, 32 mm dia polyethylene waste pipe, 32 mm bore chromium-plated brass waste fitting with long screwed shank and fly nut, flange end bedded in red-lead cement and other end securely connected, including making necessary holes in walls for brackets and making good in CM 1:3 or PCC 1:2:4 Type B0, including taking down existing unserviceable sink, removal of debris and all labour, materials, fittings, tools and equipment complete as specified. |
| 41 | S&F in repair stainless steel plate rack fabricated from 1.00 mm thick stainless steel sheet, overall size 900 x 750 mm, with shelves of 230 mm depth and partitions for small/large plates, fabricated from stainless steel 24 gauge, including necessary hooks, supports and fixing accessories, securely fixed to wall using stainless steel screws with approved raw-plug fixing system, including drilling, fixing, alignment and making good complete as specified. |
| 42 | S&F in repair PVC cabinet mirror of size 470 x 570 x 120 mm, complete with cabinet body, mirror, shelves/compartments, hinges, shutter, fixing accessories and all necessary hardware, securely fixed in position and aligned complete as specified. |
| 43 | S&F vitreous china flat-back bowl urinal with spreader and complete fixing accessories, minimum size 360 x 350 x 710 mm, white, including all necessary fittings and connections for discharge pipe, brackets, screws, traps/joints and making good complete as specified. Make: Jaquar/Kohler/Grohe or equivalent approved make. |
| 44 | S&F in repair 12 mm thick plain toughened glass for staircase handrails, doors, sliding doors and similar applications, including complete stainless steel fittings comprising SS nut-bolts, two-side handles/handrails and clamps, brackets and all necessary fixing accessories, including drilling/polishing of holes and edges where required, securely fixed, aligned and finished complete as specified. |
| 45 | S&F in repair stainless steel towel rack with lower hanger and hooks, including all necessary brackets, screws, fixing accessories and making good complete as specified. Make: Jaquar ACH-CHR-1581H or Kohler/Grohe or equivalent approved make. |
| 46 | S&F in repair stainless steel toilet roll holder with flap and hooks, including necessary brackets, screws, fixing accessories and complete installation as specified. Make: Jaquar CPA-CHR-1153 or Kohler/Grohe or equivalent approved make. |
| 47 | Demolition of cement concrete excluding reinforced concrete, in ground floors and paving, not exceeding 15 cm thickness, including breaking, taking down, removal of all debris and rubbish from site, cleaning the surface and all labour, tools, plant and equipment required for complete execution as specified. |
| 48 | M&L for 50 mm thick cement concrete 1:3:6 Type C2 using 40 mm graded crushed stone aggregate as in plinth protection, laid in panels, surface finished even and fair without using extra cement, including preparation of base, mixing, laying, compaction, levelling, finishing, curing and all labour, materials, tools and equipment complete as specified. |
| 49 | Demolition of existing roof treatment of any description including cement plaster, roof padding, APP membrane and cement tiles of any thickness from roof surfaces of buildings, including breaking and taking down existing treatment, cleaning and preparation of roof surface, removal of all debris, rubbish and dismantled materials from site and making the surface ready for further treatment, including all labour, tools, plant and equipment complete as specified. |
| 50 | M&L for PCC 1:2:4 Type B1 using 20 mm graded stone aggregate mixed with waterproofing compound as per manufacturer's instructions, laid over roof slabs to provide proper slope towards drainage outlets, including preparation of surface, mixing, laying, compacting, levelling, finishing the surface even and smooth without using extra cement, curing and all labour, materials, waterproofing compound, tools and equipment for work up to fourth-storey building height complete as specified. |
| 51 | M&L for 15 mm thick screed bed on fair faces of concrete/brick surfaces in cement mortar 1:4, incorporating waterproofing compound @ 3% by weight of cement, finished even and smooth to maintain the required slope over existing roof surfaces for laying APP-based polymeric membrane, including preparation of existing surface, mixing, laying, compaction, levelling, finishing and curing, complete with all labour, materials, tools and equipment as specified. APP polymeric membrane and waterproofing compound shall be measured and paid separately under respective items. |
| 52 | Supply only liquid waterproofing compound, suitable for cement concrete/plastering works, dosage @ 200 ml per standard bag of cement, conforming to manufacturer's recommendations, including supply in sealed containers, handling and all materials complete as specified. |
| 53 | M&L for waterproofing treatment to RCC roof slab including parapets, comprising the following courses of treatment from bottom to top: (a) application of bituminous primer 85/25 @ 0.40 litre per sqm over prepared plastered roof and parapet surfaces; (b) over the priming coat, laying one layer of APP-based polymeric membrane of approved manufacturer, 3 mm thick and weighing not less than 3.6 kg/sqm, having thermally insulated upper surface uniformly embedded during manufacture, applied by torch application with side laps of 75 mm and end laps of 100 mm; membrane shall be turned up over parapets to a minimum height of 600 mm and inserted into a prepared groove, properly sealed and finished with membrane flashing, including preparation of surfaces, treatment of joints and corners, overlaps, sealing, all labour, materials, tools, heating/torch equipment and accessories complete as specified. |
| 54 | M&L for plain cement concrete 1:2:4 Type B0 in roof kerbs or mud stops, with rounded or chamfered edges, including preparation of base, mixing, laying, compacting, shaping, finishing and curing complete with all labour, materials, tools and equipment as specified. |
| 55 | M&L for two coats of aluminium paint over prepared newly or previously untreated surfaces of any description exceeding 100 mm in width or girth, including cleaning, scraping, wire brushing, removal of loose paint/rust/dirt, preparation of surface, application of suitable primer wherever required and two finishing coats of approved aluminium paint, including all labour, materials, tools and equipment complete as specified. |
| 56 | S&F in repair 15 mm bore GI tubing, medium grade, with all necessary fittings, bends, sockets, tees, unions, nipples, clamps and fixing accessories, securely fixed to walls, floors and ceilings, including concealed installation in walls where required, making chases, cutting and making good the surface in cement mortar 1:6 to match the existing finish, pressure testing, connections and all labour, materials, tools and equipment complete as specified. |
| 57 | Description all as per srl item no. 56.00 here in before but for 20 mm bore GI tubing, medium grade, including all necessary fittings, fixing accessories, concealed or exposed installation, making good and testing complete as specified. |
| 58 | S&F in repair 20 mm bore gate valve of cast copper alloy, screwed-down high-pressure type, complete with crutch or butterfly handle, screwed ends suitable for iron pipe or unions, including necessary nipples/unions, jointing materials and fixing accessories, testing and commissioning complete as specified. |
| 59 | S&F in repair 1000 litre capacity rotationally moulded polyethylene water storage tank, cylindrical vertical type with closed top, of approved make and quality, complete with necessary inlet, outlet, overflow, drain connections, cover, fittings, supports and fixing accessories, securely fixed in position and tested for leakage, all as specified in SSR Part-I and complete as specified. |
| 60 | S&F in repair 20 mm bore brass high-pressure ball valve with polythene float and fly nut, screwed type suitable for iron pipe, including necessary connectors, washers, jointing materials and fixing accessories, securely fitted and tested for proper operation complete as specified. |
| 61 | S&F in repair vitreous china wash-down water closet pan, white pedestal pattern, complete with plastic WC seat, black/white, jet spray, closed pattern with recessed bottom and cover, mild steel chromium-plated or aluminised hinging device and all necessary fittings, excluding fixing bolts, flushing cistern and flush pipe, including connection to existing soil pipe, jointing and making good complete as specified. Make: Jaquar Cat. Part No. ECS-WHT-551PSPP, Cera Cat. Part No. S105107P, Parryware Cat. Part No. C02781L or equivalent approved make. |
| 62 | S&F in repair PVC low-level flushing cistern of 10 litre capacity, siphonic-action type, complete with inlet ball valve and float, operating handle, necessary brackets, fixing accessories and low/high-density polyethylene ISI-marked flush pipe, including connection to WC pan, adjustment, testing for proper flushing and making good complete as specified. Make: Jaquar/Kohler/Grohe or equivalent approved make. |
| 63 | S&F in repair 15 mm dia bib tap, cast copper alloy, chromium plated, fancy type, fitted with crutch or butterfly handle, screw-down type, suitable for connection to iron pipe or brass ferrule, including necessary jointing material, making connections, testing for leakage and complete in all respects as specified. Make: JAQUAR Cat Part No APR-101037, Cera Cat Part No F1017152, Parryware Cat Part No T-5004A1 or equivalent approved make. |
| 64 | S&F in repair 15 mm dia stop valve/angle valve, copper alloy, fancy type, chromium plated, screw-down high-pressure type, complete with crutch or butterfly handle and screwed connections at both ends, suitable for connection to iron pipe or union, including necessary jointing material, making connections, testing and complete in all respects as specified. Make: JAQUAR Cat Part No OPP-15053PM, Cera Cat Part No F-100320, Parryware Cat Part No T-7007A1 or equivalent approved make. |
| 65 | S&F in repair swivel shower rose, fancy type, chromium plated, 125 mm size, with or without swivel joint, of suitable size, including fixing to existing steel pipe or union, necessary jointing material, making connections, testing and complete in all respects as specified. Make: JAQUAR Cat Part No OHS-CHR-1663, Cera Cat Part No F-7010212AB, Parryware Cat Part No T-9808A1 or equivalent approved make. |
| 66 | S&F in repair mirror cabinet with PVC frame, size 400 x 500 mm, including fixing securely to wall with suitable rawl plugs, stainless steel screws and necessary fittings, alignment, making good the fixing points and complete in all respects as specified. Make: Prayag Cat No 554, Cera Cat No B-3510937, Parryware Cat No C-896A4G or equivalent approved make. |
| 67 | S&F in repair wash hand basin, flat back type, size 580 x 450 mm, including waste pipe, stainless steel coupling, waste chain and plug stopper, brackets and all necessary fittings, including cutting, pinning and securing the ends of brackets into wall, making connections, testing and complete in all respects as specified. Make: JAQUAR or Kohler/Grohe or equivalent approved make. |
| 68 | S&F in repair PVC connection, 15 mm size, complete with PTMT nuts, 600 mm long, including necessary washers, jointing and connections at both ends, testing for leakage and complete in all respects as specified. |
| 69 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D-type, 600 mm long between flanges, including suitable CP brass wall flanges, fixing with necessary screws, rawl plugs and fittings, alignment and complete in all respects as specified. Make: JAQUAR /Kohler/Grohe or equivalent approved make. |
| 70 | M&L for taking down rotational moulded polyethylene water storage tank of any size, shape or capacity, including disconnecting existing connections, carefully lowering/hoisting as required, cleaning the tank internally and externally, carrying out necessary minor repairs and providing/replacing necessary fittings such as tank nipple, tee, band and other accessories, hoisting and refixing the tank in the same position, reconnecting existing pipework, testing for leakage and complete in all respects as specified. |
| 71 | S&F in repair brass chromium plated soap dish, including necessary brackets/fittings, securely fixing to wall with suitable screws and rawl plugs, alignment and complete in all respects as specified. Make: JAQUAR/Kohler/Grohe or equivalent approved make. |
| 72 | S&F in repair brass chromium plated towel ring, including a pair of CP brass brackets, necessary screws, rawl plugs and fixing accessories, securely fixing to wall, alignment and complete in all respects as specified. Make: JAQUAR /Kohler/Grohe or equivalent approved make. |
| 73 | S&F in repair hand shower (health faucet), complete with 1.0 m long easy-flex flexible tube, wall hook and NRV (back-flow preventer), including necessary connectors, washers, fixing accessories, making connections, testing and complete in all respects as specified. Make: JAQUAR/Kohler/Grohe or equivalent approved make. |
| 74 | S&F in repair glass shelf consisting of 5.5 mm thick clear glass sheet, 120 mm wide and 600 mm long, complete with chromium plated brackets, guard and railing, including necessary fixing screws, rawl plugs and accessories, securely fixing to wall, alignment and complete in all respects as specified. Make: JAQUAR/Perryware/Cera or equivalent approved make. |
| 75 | S&F in repair CP brass single lever wall mixer, 3-in-1 system, suitable for provision of both hand shower and overhead shower, complete with 115 mm long bend pipe, connecting legs and wall flanges, including taking down existing defective/unserviceable fitting, necessary connections, jointing materials, fixing, testing and complete in all respects as specified. Make: JAQUAR Cat Part No OPP-15125PM/Cera F-1014411/ Parryware G-4854A2 or equivalent approved make. |
| 76 | S&F in repair PVC (SWR) pipe, 75 mm nominal outside diameter, Type B, wall thickness 3.20 to 3.8 mm, single socketed, in any length, with rubber ring joints, laid in trenches or floors, including taking out old unserviceable PVC/CI pipe with fittings, disposal of dismantled pipe and fittings, necessary excavation/chasing, jointing, alignment, testing and complete in all respects as specified. |
| 77 | S&F in repair PVC (SWR) pipe, 110 mm nominal outside diameter, Type B, wall thickness 3.20 to 3.8 mm, single socketed, in any length, with rubber ring joints, laid in trenches or floors, including taking out old unserviceable PVC/CI pipe with fittings, disposal of dismantled pipe and fittings, necessary excavation/chasing, jointing, alignment, testing and complete in all respects as specified. |
| 78 | S&F in repair PVC (SWR) pipe, 75 mm bore, single socketed, in any length, fixed to wall, including taking down old unserviceable PVC/CI pipe with fittings, removing existing supports/fasteners, providing necessary clamps, brackets, jointing materials, making connections, alignment, testing and complete in all respects as specified. |
| 79 | S&F in repair 5.5 mm thick fancy looking mirror of selected quality glass, mounted on wall with stainless steel (SS) plugs, held fast with chromium plated brass screws and SS cap washers and other necessary fittings, including smooth moulding/polishing of edges and securely fixing complete in all respects as specified. |
| 80 | S&F in repair PVC (SWR) bend, 75 mm bore, of any radius, including necessary socket/rubber ring joints, jointing materials, connections to existing pipework, alignment, testing and complete in all respects as specified. |
| 81 | S&F in repair PVC (SWR) bend, 110 mm bore, of any radius, including necessary socket/rubber ring joints, jointing materials, connections to existing pipework, alignment, testing and complete in all respects as specified. |
| 82 | S&F in repair brass body mortice lock, vertical type, 100 mm, 4-lever, complete with escutcheon plate and two keys, including necessary screws, fixing accessories and securely fixing in position complete in all respects as specified. |
| 83 | S&F 75 mm thick steel fibre reinforced (SFRC) manhole cover with iron frame, medium duty, complying with IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape, including bedding, seating and fixing complete in all respects as specified. |
| 84 | S&F frame work such as grills, gratings, etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walkways, railing, ledge frames or water tanks, including providing and fixing angle iron, flats, square bars, round bars and other mild steel work, providing either hooks and hinges or steel hanging door fittings, all necessary nuts, bolts, welding and other accessories, and complete fabrication, erection, hanging, fastening and fixing conforming to Fe-290 Grade E-165 complete in all respects as specified. |
| 85 | S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters, running rails, guides for sliding doors, fixed with angle cleats and other connecting plates, conforming to Fe-290 Grade E-165, including cutting, drilling, welding, fabrication, erection, necessary dismantling of existing work and fixing complete in all respects as specified. |
| 86 | S&F for preparation of new steel surface/old untreated steel surface of any description exceeding 10 cm in width or girth, including cleaning and preparation of surface and applying two coats of synthetic enamel paint over one coat of suitable primer, including necessary surface preparation, complete in all respects as specified. Make: Asian/Berger/Nerolac Paint or equivalent approved make. |
| 87 | S&F pre-painted galvanised aluminium-zinc coated GI-based corrugated steel sheet, 0.50 mm thick, of any colour, having tensile strength of 550 MPa, used as roof covering/cladding to wall, fixed with self-tapping screws and necessary washers, including cutting, overlapping, making good, necessary dismantling of existing covering/cladding and complete fixing in all respects as specified. |
| 88 | M&L for vibrator moulded, coloured precast concrete interlocking paver blocks, manufactured with grey cement and suitable pigment, of any approved shape and size, conforming to IS 15658:2006, 60 mm thick, M-35 grade, laid over prepared surface including dismantling and taking up existing paver blocks wherever required, surface preparation, laying, alignment, jointing, cutting to required shape and size and complete in all respects as specified. |
| 89 | M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate, laid as path, hardstanding, sub-base or similar work, including preparation of base, mixing, laying, compacting, finishing to required line, level and slope, including demolition and removal of existing PCC work wherever required and complete in all respects as specified. |
| 90 | M&L for filling with clean sand under floors or in foundations, including spreading in layers, watering, ramming and consolidation, dressing to required levels and complete in all respects as specified. |
| 91 | M&L for providing PCC louvers and jallies, 35 mm thick, Type B0-1:2:4 using 12.5 mm graded stone aggregate, measured solid, including casting in suitable moulds, moulding, curing, providing frame and pillar sets, setting in cement mortar 1:4, making good joints and connections, including taking down and removing existing louvers/jallies and disposal of dismantled material as required, complete in all respects as specified. |
| 92 | Dismantling floors other than ground floors, beams, staircases, landings, stone roof slabs, chajjas and similar suspended work in portions ordered for dismantling, including cutting, breaking, lowering, handling and removal of dismantled materials, necessary scaffolding, staging, tools, plant and equipment, irrespective of height and location, and complete in all respects as specified. |
| 93 | M&L for Jodhpur stone roof slabs, self-faced, 75 mm to 100 mm thick and 250 mm to 350 mm wide, hoisted and set in position, including dressing, bedding, jointing and grouting in lime mortar 1:3 or cement mortar 1:6, necessary scaffolding, lifting arrangements, staging and all equipment required for execution at any height and location, complete in all respects as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender