Tender For Repair/Replacement Of Unserviceable Old Rusted Gi/Ci/Ppr/Di Pipe Line, Sluice Valve, Gate Valve, Valve Chamber And Maintenance Of Chemical Dosing System Etc In The Aor Of Age B/R-I Under Ge 881 Ews.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
22 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Unserviceable Old Rusted Gi/Ci/Ppr/Di Pipe Line, Sluice Valve, Gate Valve, Valve Chamber And Maintenance Of Chemical Dosing System Etc In The Aor Of Age B/R-I Under Ge 881 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR/REPLACEMENT OF UNSERVICEABLE OLD RUSTED GI/CI/PPR/DI PIPE LINE, SLUICE VALVE, GATE VALVE, VALVE CHAMBER AND MAINT OF CHEMICAL DOSING SYSTEM ETC IN THE AOR OF AGE B/R-I UNDER GE 881 EWS. Contract No: GE/PNH-62/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, in any type of soil, complete all as specified and directed. |
| 4 | Removing excavated material (soil) exceeding 50m but not exceeding 150m and depositing where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 5 | Steel water tubing galvanised steel, medium grade with all fittings like socket, nipple elbow, bends, tees shorts pieces, connectors, diminishing pieces, caps plug etc laid in trenches/on supports for following size of bore of pipe sizes:- |
| 6 | 20mm dia |
| 7 | 25mm dia |
| 8 | 40mm dia |
| 9 | 50mm dia |
| 10 | 80mm dia |
| 11 | 100mm dia |
| 12 | S&F in repair gate/globe valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size:- |
| 13 | 20mm bore |
| 14 | 25mm bore |
| 15 | 40mm bore |
| 16 | 50mm bore |
| 17 | Construction of brick masonary valve pits with sub class \\"B\\" bricks built in CM 1:4 and including planted 15mm thick in CM 1:4 internlly pointed as work process of size 100cmX100cmX100cm (internal dimension)complete and fabrication of M S cover made out of 3mm thick MS sheet and angle iron frame made out of 40mmX40mmX6mm thick and one side provided with hinges and another side provided with locking arrangements and PCC 10 cm thick in 1:4:8 type D-1 including dismantling the existing unserviceable valve pit complete all as specified and directed. |
| 18 | All as per item No 06 here in before but 90cmX90cmX90cm. |
| 19 | S&F in replacement sluice valve 100mm bore, all as IS -14846-2000 PN 1.0 with Steel metal spindle both ends flanged and drilled with necessary holes for bolts including jointing materials viz nuts, bolts, rubber gaskets etc with iron wheel head including flange joints and making necessary arrangements to fix in position complete all as specified and directed . |
| 20 | All as per item No. 08.00 above but 80 mm bore complete. |
| 21 | S&F in replacement cast iron NRV valve 100 mm bore, with by pass arrangment complete all as specified and directed. |
| 22 | All as per item No. 10.00 above but 80 mm bore complete. |
| 23 | S&F in replacement of gland doori for air packing of centrifugal pumps of size 5mm/6mm/8mm complete all as specified and directed. |
| 24 | S&F in replacement cast iron Air Release Valve 80mm bore, with two air out lets complete all as specified and directed. |
| 25 | Lifting /lowering unservicable submersible pump assembly completely any type/size up to 17.5HP along with coloum/delivery pipe of 40/50/80 mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and serviceing of pump etc and reassemblying after repair, lowering in to the bore well, including aligning and commissioning complete all as specified and directed.Note:-(a) Unit rate quoted deemed to include only labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete(b) Repairs/rewinding of submersible pump shall be measured under relevant items.(c) Replacement of column pipe will be measured and paid separately as in supply only under relevants items. |
| 26 | Supply only following spare parts for submersible pump set vertical type up to 17.5HP complete all as speified and directed. |
| 27 | (a) SS impeller as per existing |
| 28 | (b) Thrust bearing as per existing |
| 29 | (c) Thrust plate set as per existing |
| 30 | (d) Sand Guard as per existing |
| 31 | (e) Stainless steel bush as per existing |
| 32 | (f) Pump shaft as per existing |
| 33 | Taking out unserviceable submersible motor upto 17.5 HP from the existing place and transporting the same to authorised workshop dismantling and rewinding the burnt motor with suitable gauge of PVC insulated super enamelled copper wire including re-fixing at same location including aligning and testing, commissioning complete all as specified and directed. |
| 34 | Dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carrying out necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 50HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note :-(a) Unit rate quoted deemed to include only labour for tpt and reapir. (b) Spares /rewinding of pump set shall be measured under relevant items. |
| 35 | Supply only following spare parts for centrifugal pump set up to 50 HP complete all as speified and directed:- |
| 36 | (a) CI impellers |
| 37 | (b) Diffuser |
| 38 | (c) Neck ring |
| 39 | (d) Shaft bush |
| 40 | (e) Shaft |
| 41 | (f) Roller bearing |
| 42 | (g) Stuffing box gland. |
| 43 | (h) Bearing 6307/6308/6309/6312/7307/7308 |
| 44 | Taking out worn winding of centrifugal pump motor of capacity upto 50HP carefully and rewinding the same with existing size of super enamelled copper winding wire ,including necessary varnishing and insulating material baking etc, transportation to workshop and back at site complete all as directed by Engineer-in-Charge. |
| 45 | M&L for repair of starter with disconnecting all electric connections, and replacment of unserviceable parts like contractor, relays, coil etc and connecting to the existing pump set of cap upto 50 HP, including testing complete all as specified and directed. |
| 46 | Supply and fix in repair including testing submersible cable flat Three core PVC insulated and PVC shedthed industrial copper cable of size 10 Sqmm 1100 Volts for connection from starter to motor complete all as specified and directed. Make: Finolex/ CCI/ Havell's. |
| 47 | All as per item No.21 above but of size 6 Sqmm complete. |
| 48 | S&F in replacement, Manually Operated Oil Immersed Star Delta Motor Starter for 50HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact duly oil filled including testing and taking down old UNSV starters all as specified and directed. |
| 49 | S&F in replacement, autometic 3 phase submersiable pump starter for 5.5-10 HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact including testing and taking down old UNSV starters all as specified and directed by Engineer-in-Charge. |
| 50 | Supply only chlorination chemical highly efficient (high strength) calcium hypochloride 65% to 70 % chlorine content based granular disinfectant more stable in sealed container, no Sodium/iron/ Mercury/Heavy metal contaminations. Note:- (i) The contractor shall produce manufacturer’s test certificate and purchase vouchers of calcium based granular disinfectant.(ii) The calcium based granular disinfectant shall be brought at site in sealed plastic container .(iii) Qty shown at Col 6 will not accepted at one time as the material having lesser expiry period. |
| 51 | M & L in repair for run lead joint / welding joint including spun yarn, welded rod, pumping/bailing out of back flow accumulated water in trenches, burning out and taking out old lead, complete to spigot and socket cast iron/GI pipe and fitting and cocking /welding with suitable quantity of lead or welding rod complete of size upto 100 mm bore pipe. |
| 52 | Preparation of surface for Painting of pump/ motor of any type and any capaicty and Pipe of any dia for complete surfaces for painting applying two coats of synthetic enamel paint over one coat of red oxide primer as per colour code on pump sets including SM/MES No of appropriate size of letters with white paint, complete all as specified and directed by Engineer-in-Charge. Note :- Rates are applicable for painting of all Eqpts/Motors/Pump installed in installation at following locations:- (a) Hamirpur (b) BG Bde (c) Mendhar (d) Balnoi |
| 53 | Cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000gallons (Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall , top, bottom with fresh water, with the help of pressure jet pump ( Maxium pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as directed by Engineer - in -charge . |
| 54 | Supplying, fixing, laying and jointing of ductile iron pipe 150mm bore ISI marked double ended welded flanged with jointing material such as rubber gasket, nut, bolts, washers of suitable size complete, confirming to latest revision of IS:8329/2000 of class K-9 barrels with internal cement mortar lining and outside zinc followed by bitumen coating. The pipe and all fittings shall be PN-1.00complete all as specified and directed. |
| 55 | S&F in replacement of DI double flanged bend 150mm bore x 90° as per IS:9523/2000 of class K-12 with internal cement mortar lining and externally metallic zinc/ zinc rich paint coating with finishing layer of bitumen coating, PN-10 complete all as specified and directed by Engg-in-charge. |
| 56 | S&F in replacement of submersiable pump 5.5-10HP three phase with 60 meter head and output 4.5 LPS with complete accessories complete all as specified and directed. |
| 57 | S&F in replacement of Rigid shaft coupling for centrifugal/multistage pump as per exisgting size & capacity complete all as specified and directed. |
| 58 | S&F in replacement of Star coupling (Rubber type) of size L-150/L-190/L-220/L-225 for centrifugal/ multistage pump complete all as specified and directed. |
| 59 | S&F in replacement of flange with gasket for 100mm dia GI Pipe with complete all as specified and as directed. |
| 60 | S&F in replacement of flange with gasket for 80 mm dia GI Pipe with complete all as specified and as directed. |
| 61 | S&F in replacement of foot valve 50/80mm bore cast iron flange / screwed with gasket complete all as specified and as directed.. |
| 62 | Heavy Duty 5 Ton Chain Pulley Block for lifting hook for lowering and lifting of submersible pump form borewell of hight 5 mtr from GL and 1.5 Mtr below ground level with 3 meter Chain 3 Meter standard Lift 10 mm load chain Double Fall complete all as specified and directed. |
| 63 | S&F in replacement of foot valve 100 mm bore cast iron flange / screwed with gasket complete all as specified and as directed.. |
| 64 | Supply, Laying, jointing, testing and in replacement of LT underground cable, heavy duty, 1100 Volts, XLPE insulated, armoured with multi-stranded aluminium conductor cable, laid in trenches/ ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete of size 3.5 core 95 Sqmm all as specified and directed |
| 65 | All as per Item ser No.39 above but size 3.5 core 70 sqmm complete. |
| 66 | All as per Item ser No.39 above but size 3.5 core 50 sqmm complete. |
| 67 | All as per Item ser No.39 above but size 3.5 core 35 sqmm complete. |
| 68 | Dry sand as in sand cushioning to under ground cable including punning down all as specified and directed. |
| 69 | Brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed. |
| 70 | Supply, installation, commissioning and testing of high pressure 5Kg/sqcm single head chemical dosing system with FRP tank of capacity 100 littres, dosing pump, agitator and control panel including accessories like lead tubing, connecting ferrule, check valve etc. complete including plith for the same all as specified and as directed by Engr-in-Charge. |
| 71 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead strip 25 x 4 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,40mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. |
| 72 | S&F in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspebded by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire one twin core flat of size 4 sqmm sold aluminium conductor complete all as specified and directed. |
| 73 | All as per item No.47 here in above but twin core 6 sqmm complete. |
| 74 | All as per item No.47 here in above but twin core 10 sqmm complete. |
| 75 | S & F in replacement MCCB 63 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. |
| 76 | S & F in replacement MCCB 100 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. |
| 77 | S & F in replacement MCCB 160 Amp, 4 pole 36 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. |
| 78 | S&F in replacement of nut and bolt of size 16/17/19/20/24/26 No with fully threaded top to bottom complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender