Tender For Comprehensive Repair And Maintenance Of B/R And E/M Works In Md Accn Under Age B/R-Ii Of Ge Saugor
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance Of B/R And E/M Works In Md Accn Under Age B/R-Ii Of Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 3 | Taking down shutters of any description, area exc 1 Sqm but n'exc 2.00 Sqm each complete all as specified and directed. |
| 4 | Re-fixing shutters of any description in same opening, area exc 1 Sqm but n'exc 2.00 Sqm each complete all as specified and directed.Note: The item for 'refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates |
| 5 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 6 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded |
| 7 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 8 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed. |
| 9 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 10 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. |
| 11 | S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm. Make - jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, complete all as specified and as directed. ((Note-glazed shutters glass thickness not less than 5.00 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No extra payment will be made separately) |
| 12 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 13 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 14 | M&L for Second class hard-wood in scantlings, Timber framed and fixed, Clean sawn including preparing surfaces and treated with creosote complete all as specified and directed. |
| 15 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work complete all as specified and directed. |
| 16 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 17 | S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with 2mm thick Plain colour PVC sheet fixed or laid on one side of board and 2mm thick wood grained prelam PVC sheet on other side of board , using rubber based adhesive, including heat bent of PVC sheet as lipping on the edges of doors, supplying & fixing at site as per specification complete all as specified and directed.Note : Total thickness of door shall be 35mm approx) |
| 18 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surfaces complete all as specified and directed.Note: (i) The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates.(ii) The glass and wire gauge shall be measured and paid separately under respective item here under. \\" |
| 19 | M&L for glazing with 3mm thick sheet glass ordinary quality and glazing with oil putty in square, nexc 0.5 sqm in each pane complete all as specified and as directed.. |
| 20 | M&L for glazing with 3mm thick Figured glass, pin head type and glazing with oil putty in squares n'exc 0.5 sq. m in each pane complete all as specified and as directed.. |
| 21 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 22 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 23 | S&F 150mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 24 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 25 | S&F 150mm long stainless steel floor door stopper, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 26 | S&F 200mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 27 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 28 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 29 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 30 | Hacking out old broken glass of any thickness and any description from wooden/steel frame/stone concrete of brrick surrounds complete all as specified and directed. |
| 31 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 32 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 33 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 34 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches, pillars etc built in cement motar complete all as specified and directed. |
| 36 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 37 | M&L for applying three coats of white wash on newly plastered wall surfaces including preparation of these surfaces complete all as specified and directed. |
| 38 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 39 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 40 | M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 41 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with decorative end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 42 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 43 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 44 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 45 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 46 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 47 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to walls complete all as specified and directed. |
| 48 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 49 | S&F in repairs PVC (SWR) bends, 110mm bore dia complete all as specified and directed. |
| 50 | S&F in repairs PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 51 | S&F in repairs110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius, complete all as specified and directed. |
| 52 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 53 | S&F in repairs of 75mm dia PVC (SWR) floor trap SS grating including jointing with solvent cement complete all as specified and directed.. |
| 54 | S&F Pillar Cock, chromium plated with required accessories complete in all respect including taking down existing tap of any description, as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29001PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 55 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 56 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 57 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 58 | S&F in repair chromium plated exposed part Kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal including regular body of concealed stop cock cold only suitable for 15mm pipeline with protection cap with required accessories complete in all respect as specified and directed.Make : Jaquar (Cat Part No for exposed part-FUS-CHR-29083K and concealed Part:-ALD-083R,ALD-083L/ALD-089R/ALD-089L/ALD-081) or equivalent in kohler/Hans Grohe/Villeroy and boch. |
| 59 | S&F Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses, chromium plated with required accessories including taking down existing tap/mixer of any description, complete in all respect as specified and directedMake Jaquar (Cat Part No FUP-CHR-29011BPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 60 | S&F Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) screwed down for 15mm bore iron pipe including taking down existing mixer /taps of any description complete all as specified and directed.Make : Jaquar (Cat Part No FUP-CHR-29281PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 61 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 62 | S&F Soap Dish Holder with wall flange, chromium plated with required accessories complete in all respect including taking down existing Soap Dish Holder of any description, as specified and directed . Make Jaquar (Cat Part No CPA-CHR-1131) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 63 | S&F Single Towel Rail 600mm Long, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1111) or equivalent in Kohler/ Hans Grohe/ Villeroy and boch |
| 64 | S&F in repair primium quality stainless steel peg set (Set of 6 Pegs)fixed to wall with PVC plug and SS screws complete all as specified and directed. |
| 65 | Supply only 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 66 | S&F in repairs of 100mm dia Stainless steel grating (Primium quality)with or without waste pipe hole including jointing with solvent cement complete all as specified and directed.. |
| 67 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 68 | S&F in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 69 | S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 70 | S&F kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe including taking down existing sink of any description complete all as specified and directed.Make : Nirali (Popular range-SMALL-glossy finish) /Cera(Cat part No B4512122-glossy finish)/Johnson (Cat part No K030206SBG) |
| 71 | M&L for cutting holes into or through brick walls, built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete., Superficial area n'exc 150 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. |
| 72 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) |
| 73 | S&F Vitreous china Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, p or S Trap including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No CNS-WHT-853P180SPPSM/CNS-WHT-853S220SPPSM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 74 | S&F in repair plastic water closet seat covered white coloured closed pattern with flap complete and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 75 | S&F Vitreous china vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe complete fixed including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ECS-WHT-451 or equivalent Hindware/ johans/ parryware |
| 76 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Note : Pillar tap and PVC connection will be measured paid separately.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 77 | S&F Wall Hung Cistern (Compatible with 39mm Drainage Pipes) with Black Top & Installation Kit with Drainage Pipes of require length, connection to WC complete including dismantling/taking down existing cistern of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ESH-WHT-184NBTT or equivalent Hindware/ johans/ parryware |
| 78 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 79 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but notbacking), any description including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 80 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 81 | M&L for mirror polished machine cut Kota stone slab flooring 16-18 mm thick size not less than 550mmX550 mm, laid over and including 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. all as specified and directed |
| 82 | M&L machine cut kota stone slab 18-20mm thick as in skirting, steps riser etc laid over 10mm thick plaster in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing complete all as specified and directed. |
| 83 | M&L for Non skid ceramic coloured tiles in floors etc, 8-10mm thick, area of each tiles exc 0.18 sqm but n'exc 0.38 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 84 | All as per item 81 above but as in Dado/skirting fixed over and including 10mm thick rendering in CM (1:4).complete all as specified and directed. |
| 85 | M&L for Non skid ceramic coloured tiles in floors etc,7 to 8mm thick, area of each tiles exc 0.11 sqm but n'exc 0.18 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 86 | All as per item 83 above but as in Dado/skirting fixed over and including 10mm thick rendering in CM (1:4).complete all as specified and directed. |
| 87 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical surfaces ie. as in skirting/dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed in cement mortar (1:4) complete all as specified and directed. |
| 88 | M&L for Non skid ceramic coloured tiles in floors etc,7 to 8mm thick, area of each tiles exc 0.06 sqm but n'exc 0.11 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 89 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 90 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 91 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 92 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 93 | M&L for PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed.Note : Average thickness exc 25mm thick but n'exc 40mm |
| 94 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 95 | M&L for mild steel TMT bars 6 to 8 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 96 | M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded aggregate, Nominal mix)) as in slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc complete all as specified and directed. |
| 97 | M&L for use & waste wooden form work to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal/ sloping), rough finished concrete surface, complete all as specified and directed. |
| 98 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates.Make : Mehtab tiles Indore(Mehtab)/ Nitco(NITCO)/ M/s Supreme Tiles |
| 99 | M&L for providing, cement concrete Type B0 1:2:4 (using 12.5mm graded aggregate) in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 100 | S&F in repair 18 to 19mm thick marine py wood, interior grade, laminated one side with 1mm thick coloured mica and other side with 1mm thikc white mica, as in cupboards, shelves, pelmets etc, cut to required size and fixed to frame complete all as specified & directed. |
| 101 | S&F 6mm thick external teak wood lipping on exposed edges of ply wood board/ flush shutter, fixed with nails including polishing complete all as specified and directed. |
| 102 | S&F 100mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 103 | S&F stainless steel Continuous (piano) hinges, width of flaps (when open)- 30mm, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 104 | S&F 100mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 105 | S&F 100mm long stainless steel Hasp and staple, safety type, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), including bolt to hinge plate and fixed with stainless steel screws complete all as specified & directed. |
| 106 | S&F metal body magnatic ball catches with striking plate, heavy duty fixed with stainless steel screws complete all as specified & directed. |
| 107 | M&L for one coats of white wash on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 108 | M&L for one coats of white wash on old decorative ceiling surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 109 | M&L for two coats of white wash on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 110 | M&L for one coats of distemper oil emulsion on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 111 | M&L for two coats of acrylic emulsion on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 112 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on of wall/ceiling surfaces as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 113 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 114 | M&L for one coat of synthetic enamel paint on old wooden or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 115 | M&L for one coat of synthetic enamel paint on old steel or steel based surfaces of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 116 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminium zinc coating 150 gsm/ sqm double ribbed trapezoidal profile / corrugated steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets complete all as specified and directed. |
| 117 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 118 | Dismantling of timber fillets, rails, posts, rafters, purlins etc in framed work under 40 Sq. cm in section complete all as specified and as directed. |
| 119 | S&F Rolled sections including hollow tubes as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 120 | M&L for suspended false ceiling comprising of non asbestos fibre cement building boards of size 595mmx595mm,6mm thick fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6mmm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender