Tender For Provn Of High Mast Lights With Generator Backup At Shar-E-Shali Garrison At repair renovation Under Ge 861 Ews
Tender Value
26.13 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
11 days left
EMD
52270
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sabarkantha → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of High Mast Lights With Generator Backup At Shar-E-Shali Garrison At repair renovation Under Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | High Mast LightSupply, installation and testing of High galvanized mast light 15 Mtr height suitable for 6 to 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage, suitable size trailing cable, connectors and double drum winch with luminaire mounting arm, pully assembly, intergral power tool suitable capacity motor for up and down of arms with mounted light fittings , manual handle, aviation obstruction light, lightening arrestor spike, Outdoor electrical control feedder panel box with 1 No. 40A TPN MCB incomer, single dial time switch, 22 Amp tripple pole contactor for the automatic switching of luminaries, power tool control with 2 No 10A contactors and raise lower push button, power socket, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals complete system in all respect and including RCC foundation as per height required and specified & recommended by Manufacturer and as directed. |
| 2 | Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 3 | Supplying, laying, jointing and testing and passing through ducts/pipes, fixing along poles, jointing and testing ; XLPE cable insulated, screened, PVC bedded, galvanized steel wire or strip armoured electric power cable (heavy duty) with aluminium stranded conductor 1100 volts grade of size 25 Sq mm 4 core complete all as specified and directed. |
| 4 | Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeking 25 cm complete all as specified and directed. |
| 6 | Removing surplus excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 7 | M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed.Note : Punned thickness shall be measured. |
| 8 | M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified and directed |
| 9 | Supply and laying GI tubing light grade with all fittings laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified and directed of following sizes :- |
| 10 | (a) 80mm dia light grade GI tubing |
| 11 | (b) 40mm dia light grade GI tubing |
| 12 | M&L earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level earth plate connected with GI strip of size 25x 4mm by means of lugs, bolts, nuts, check nuts, washers of galvanised iron GI protection pipe 40mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to panel, including excavation, earth work, salt and charcoal dust mixed, GI pipe medium grade 20mm nominal bore for watering, funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) with suitable lifting handle and pit/chamber in PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
| 13 | M&L earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level earth plate connected with GI strip of size 25x 4mm by means of lugs, bolts, nuts, check nuts, washers of galvanised iron GI protection pipe 40mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to panel, including excavation, earth work, salt and charcoal dust mixed, GI pipe medium grade 20mm nominal bore for watering, funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) with suitable lifting handle and pit/chamber in PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender