Tender For Special Repair To Bldg No T-13, T-14, T-216, T-217 & T-219 At Bathu Basti Af Stn, Sri Vijaya Puram
Tender Value
48.28 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
26 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-13, T-14, T-216, T-217 & T-219 At Bathu Basti Af Stn, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or lime mortar of any description complete all as specified and as directed. |
| 2 | M & L for Precast cement concrete block masonry 1:3:6, type C1, (20mm graded stone aggregate) as in masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and as directed. |
| 3 | Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land complete all as specified and as directed. |
| 4 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | M&L for 15mm thick rendering in two layers of 10mm thick backing coat in cement mortar 1:6 and 5mm thick floating coat in cement mortar 1:4, mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately) |
| 6 | Supply only Liquid integral water proofing chemicals complete all as specified and as directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] (3% by wt of cement). |
| 7 | M & L for Preparation of newly plastered or untreated surfaces of wall and painting with two coats of oil bound distemper over a coat of primer complete all as specificed and as directed. |
| 8 | M & L for Preparation of newly plastered or untreated surfaces of wall and applying two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer complete all as specified and as directed. |
| 9 | M& L for Applying 1mm thick on wall care putty on wall complete all as specified and as directed. |
| 10 | M & L for Preparation of old plastered or untreated surfaces of wall and painting with two coats of oil bound distemper over a coat of primer complete all as specificed and as per directed. |
| 11 | M & L for Preparation of old plastered or untreated surfaces of wall and applying two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer complete all as specified and as directed. |
| 12 | Dismantling plain or corrugated steel sheeting any gauge, thickness, in roof coverings etc complete all as specified and as directed. |
| 13 | Dismantling wrought iron (or) mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 14 | S&F Roof Trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or Flat section) including distance pieces, cleats etc conforming to Fe-410-W grade E 251 Quality B complete all as specified and as directed. |
| 15 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and as directed. |
| 16 | M&L for Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge. |
| 17 | M&L for Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge. |
| 18 | S&F MS works as in wind ties for roof including securing bolts etc complete all as specified and as directed. |
| 19 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed |
| 20 | S&F Plain, Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 21 | M&L Preparation of new steel or iron surfaces of exc. 10cm wide or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed. |
| 22 | Taking down chowkats or frames n. exc. 1.5 Square metre each with shutters (without taking off shutter from the frame) complete all as specified and as directed. |
| 23 | All as per above Item Ser No.22.00 but exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed |
| 24 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, and fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 25 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 26 | S&F Anodised aluminium frame for doors, windows, ventilators and Partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 27 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 28 | M&L for Aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed. |
| 29 | S&F Aluminium composite panel (ACP) sheet of 4 mm thick as in wall cladding & false ceiling,Chajja including aluminium frame work with plastic strips ( double sided sticker) of suitable size of varying thickness of 10mm to 30mm and applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. |
| 30 | S&F Aluminium (extruded section ) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 31 | S & F Aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed. |
| 32 | S & F Aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed. |
| 33 | S&F Aluminium alloy anodised handles of size 150mm long extruded section fabricated type, complete all as specified and as directed. |
| 34 | S&F Butt hinges, 100mm length medium weight cold rolled mild steel and fixed, complete all as specified and directed. |
| 35 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 36 | S&F Sheet glass 4.0mm thick ordinary quality and glazing with oil putty in Square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 37 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets of any description and any thickness, fixed in any position complete all as specified and as directed. |
| 38 | M&L for False ceiling with aluminum grid work (Size of grid 605x605 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm complete all as specified and as directed. |
| 39 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed complete all as specified and as directed. |
| 40 | M&L for Granite stone slab 18-20mm thick of any type work table rubbed and polished in steps, jambs ,pillars, cooking platforms and the like including pointing with white cement mortar 1:2, using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 41 | Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and Removing Rubbish out side of the MD Land complete all as specified and as directed. |
| 42 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as specified and as directed. |
| 43 | M&L for Plain cement concrete 1:2:4, 25mm thick, type B-1, (20mm graded stone aggregate) as in levelling course complete all as specified and as directed. |
| 44 | M&L for Plain cement concrete 1:4:8 , 100mm thick, type D2, (using 40mm graded stone aggregate) as in sub base of flooring/hard standing,Path way etc complete all as specified and as directed. |
| 45 | M&L for Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick (each layer 7.5cm) watered and rolled/ rammed to a true surfce complete all as specified and as directed. |
| 46 | M&L for Plain cement concrete 1:3:6, 75 mm thick, type C1 (using 20mm graded stone aggregate) as in Plinth Protection complete all as specified and as directed. |
| 47 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 48 | M&L for Glazed ceramic coloured / printed tiles (450X300mm) x 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3, complete all as specified and as directed. |
| 49 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of 15 mm thick in Cement mortar 1:6, for laying floor finishes complete all as specified and as directed. |
| 50 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of 10 mm thick in Cement mortar 1:4, for laying floor finishes complete all as specified and as directed. |
| 51 | M & L for Coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed in neat cement slurry and pointed with with mixture of white & grey cement in equal proportions & no pigment, over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 etc. complete all as specified and as directed. |
| 52 | Providing and laying of 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 53 | M&L for Plain cement concrete 1:2:4, type -B1 (using 20mm graded stone aggregate ) as in surface channaels and drain etc complete all as specified and as directed. |
| 54 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete complete all as specified and as directed. |
| 55 | Taking up or down, 25/32mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed |
| 56 | Taking up or down, 20 mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed |
| 57 | Taking up or down, 40 mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed |
| 58 | S&F of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 59 | S&F of CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 60 | S&F of CPVC pipes 40 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 61 | S&F in Repairs Vitreous China wash down water closet pan (pedestal pattern) including seat cover, white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good complete all as specified and as directed. |
| 62 | S & F in Repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR \\"P or S\\" trap complete all as specified and as directed. |
| 63 | S&F in Repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed. |
| 64 | S & F in Repairs Rotational moulded polythene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted in position incl 40 mm dia brass float valve complete all as specified and as directed. |
| 65 | S&F in Reapirs for Harrison rails, 20mm dia , mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 66 | S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified and as directed. |
| 67 | S&F Vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F in Two way bib tap with wall Flange screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed . |
| 69 | S & F in Repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed. |
| 70 | S&F in Repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed. |
| 71 | S&F in Repairs Stop Valves / Angle Cock 15mm Bore with fancy type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 72 | S&F in Repairs Looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 73 | S & F in Repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 74 | S & F in Repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 75 | S&F in Repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed. |
| 76 | S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed. |
| 77 | S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl joining with solvent and cement mortar complete all as specified and as directed. |
| 78 | Taking down PVC waste ,vent,rain water pipes incl fittings in any position complete all as specified and as directed. |
| 79 | S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed. |
| 80 | S&F PVC (SWR) Gully trap 125/110 mm,setting and incl joining with solvent and cement mortar complete all as specified and as directed. |
| 81 | S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 82 | S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints,laid in floors complete all as specified and as directed. |
| 83 | S&F PVC (SWR) bend 75mm dia with any radius complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bend 110mm dia with any radius complete all as specified and as directed. |
| 85 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe complete all as specified and as directed. |
| 86 | S&F PVC (SWR) vent cowls 100 mm dia, complete all as specified and as directed. |
| 87 | S & F in PVC (SWR) pipes 150 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 88 | M&L for Providing precast Reinforced cement concreter 1:2:4, type B1, (using 20mm graded stone aggregate) as in cover slab for manholes, septic tank and similar work set in cement mortar 1:6, incl specified incl necessary form work and placed in position complete all as specified and as directed. |
| 89 | M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed. |
| 90 | M & L for Water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions :- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.Note :- Water proofing compound shall be measured and paid separately. |
| 91 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 92 | M&L for Point wiring with 1.5 Sqmm FRLS multi strand PVC insulated and unsheathed copper conductor cable concealed in and including PVC conduit of 20 mm dia. ISI marked complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for One light /exhaust fan point controlled by one switch |
| 93 | All as per Item Ser No.92.00 here in before but One fan point controlled by one switch and one regulator complete all as specified and as directed. |
| 94 | All as per Item Ser No.92.00 here in before but One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and as directed. |
| 95 | All as per Item Ser No.92.00 here in before but One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and as directed. |
| 96 | All as per Item Ser No.92.00 here in before but One lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 97 | All as per item at sl No. 92 here in before but with copper conductor cable for one 3 pin socket outlet, 15A independent, with cable 4 Sqmm and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F Switch piano flush type 5 Amp single pole one way complete all as specified and as directed. |
| 99 | S&F Switch socket outlet 3 & 2 pin 5 amps flush/box type, complete all as specified and as dircted. |
| 100 | S&F Switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed. |
| 101 | S&F Ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed. |
| 102 | S&F Fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed. |
| 103 | Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as specified and as directed. |
| 104 | S&F Energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and as diected. |
| 105 | S&F Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed. |
| 106 | S&F Bldg Security light 25W LED energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete all as specified and as directed. |
| 107 | S&F LED lamp 9 Watt, 230 Volt complete all as specified and as directed. |
| 108 | S&F in Repairs metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed. |
| 109 | S&F MCB SPN 32 Amp 240 volt complete all as specified and directed. |
| 110 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed. |
| 111 | M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC 1:3:6, type C1, pre cast RCC 1:2:4, type B1, cover slab 54cm x 54cm x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I. |
| 112 | Supply,laying,jointing,connecting,testing underground XLPE insulated,PVC seathed, armoured heavy duty electric LT cable,1100 volts grade with aluminium stranded conductor,10 sqmm 4 core,laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands,crimping type cable lugs,sockets etc.complete and taking down the existing cable complete all as specified and as directed. |
| 113 | Supply & laying cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked complete all specified and as directed. |
| 114 | S & F in Rotational moulded polyethylene water storage tanks capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifiedand and as directed. |
| 115 | S & F in Ball brass float valves of size 40mm, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 116 | M&L for Cutting the existing water main 40mm dia and insert 'T' reducer/ferrule for taking branch connection of size 40mm including all materials as required and excavation, earth work complete all as specified and directed. |
| 117 | S & F Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete after dismantling and taking out the existing unserviceable Gun metal gate valve of size 40 mm complete all as specified and as directed. |
| 118 | S& F in Replacement steel water tubes medium grade (ISI marked) galvanised with all fittings and fixed to walls or laid on floor or in ceilings of size 40 mm bore pipe alongwith all fittings as per site reqirement including taking out of old pipelines complete all as specified and as directed by Engr-in-Charge. Make : Tata/Jindal/Bansal Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender