Tender For Day To Day Maintenance, Complaints And B/R Repairs Works Of Residential Highrise Bldgs Of Cell No 1 Area Under Age B/R-I Of Ge(Nw) Nofra, Colaba,Mumbai.
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance, Complaints And B/R Repairs Works Of Residential Highrise Bldgs Of Cell No 1 Area Under Age B/R-I Of Ge(Nw) Nofra, Colaba,Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Note : (1) Contractor/supervisor detailed by contractor to visit complaint cell N0 1 B/R at 9.00 AM daily to receive complaints and submitt completed complaint by 5.00 PM on same day. Contractor will be resposible for providing the equipments and working tools to their workers.(2) Contractors/Venders shall be responsible for providing the all safety measures equipment and scaffolding at site to the workers wherever require as per site requirement being HIGHRISE BUILDINGS . The cost of the same shall be deemed in coated rate/amount only. There is no extra payment will be made by the dept. for the same. |
| 2 | S&F in repairs plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws/nails as kitchen cabinet/ Loft/cupbord etc complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for 12 mm thick commercial plywood (IS), grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges of kitchen cabinets, cupbord shutters etc complete all as specified and directed. |
| 4 | M&L 18 mm thick commercial ply wood (IS), grade BWR, type BB fixed with screw to timber frame work including 1st class HW leaping all around the shutter/edges.of kitchen cabinets, cupbord shutters etc complete all as specified and directed. |
| 5 | S&F Telescopy channels,powder coated with ball bearings, suitable for sliding SS kitchen bracket 60 cm long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed. |
| 6 | Dismantling boarding any description fixed in any position with nails/screw etc, as in kitchen cabinet, cupboard shelves with fittings/ aluminium mongaries etc complete all as specified and directed by engineer-in-charge. |
| 7 | S&F in repair of 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 8 | S&F 100mm size aluminum handle 'D' type anodized complete all as specified and as directed. |
| 9 | S&F for 40mm dia cupboard knobs fixed with nut, washers / screws etc. of brass polished, bright finished complete all as specified and and directed. |
| 10 | S&F in magnet catcher suitable for kitchen cabinet/cupboard with steel plate and stainless steel as required complete all as specified and as directed. |
| 11 | Supply and fixing in repairs, drapery rod of mild steel 25mm dia, ribbed/fancy type, powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed. |
| 12 | S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified. |
| 13 | S&F in repair 150 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified |
| 14 | S&F in repair 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specifid and directed. |
| 15 | S&F in repairs 125 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified |
| 16 | S&F in repair 300 mm MS ordinary rat tail rod pattern (Helical door spring) including roller and roller plate complete all as specified and directed. |
| 17 | S&F in repair 250 mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 18 | S&F in repair door seal 50mm wide and 1 m in length built in aluminium black plate with nylon brush fixed with screws. |
| 19 | S&F floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor. |
| 20 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. [Note:-New wooden beading required for glazing glass in wooden window will be paid separately under respective item.] |
| 22 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 23 | S&F in repairs Door closer hydraulically regulated, designation No. 3, aluminium body universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. |
| 24 | S&F 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate,as in repairs, complete all as specified and directd. |
| 25 | M&L for resecuring of existing window glass panes by using oil putty/ wooden beading as required complete all as specified and as directed. |
| 26 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 27 | M&L for repairs to existing wooden/PVC/particle board, cup board of any size,any description and at any position by taking down and refixing after repair/renewal of unserviceable mongaries as required complete all as per existing pattern as directed by Engineer-in-Charge. |
| 28 | Resecuring or easing and adjusting shutters of any description not exceeding 01 sq.m each without taking down shutter of any desciption compelte all as specified. |
| 29 | Resecuring or easing and adjusting shutters of any description exceeding 01 sq.m but n exc 2.00 sq,m each without taking down shutter of any desciption complete all as specified. |
| 30 | M&L for Taking down wooden/PVC door shutter of size exc 1.00 sq.m but n exc 2.00 sq.m from chokhats of Mild steel/wooden/pressed steel of any description and refixing in same opening after necessary minor repair and renewal of necessary hardware fittings as required inlcuding welding hinges to frame, making serviceable shutter etc complete all as specified and directed . |
| 31 | M&L for Taking down old aluminum door/windows and refixing in same opening after reparing to damaged/loosened aluminum rail sections, tightening of scerws,reparing/replacement of locking arragment, repair and replacement of glass beading etc making door in servicealbe condition complete all as specified and directed. |
| 32 | M&L for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc complete all as specified and as directed by Engr-in-Charge. |
| 33 | S&F Brass mortice night latch 4 levers, vertical type, 100mm size include for escutcheon plates and two keys suitable for doors in repairs complete all as specified and directed. |
| 34 | Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified. |
| 35 | Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified. |
| 36 | S&F of 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 37 | S&F of steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified. |
| 38 | Cutting chases for concealed water tubing etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 39 | S&F in repair 15mm bore bib tap cost copper alloy CP fancy type with crutch or butterfly handle screwed down screwed to iron pipe or GI/Kitec fiiting complete all as specified and directed. |
| 40 | S&F in repair 15mm bore stop cock/angle cock cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions,or GI/Kitec fiiting complete all as specified and directed. |
| 41 | S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle, screw both end for iron pipe fiiting complete all as specifeid and directed. |
| 42 | S&F in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as approved by engr-in-charge. |
| 43 | S&F in repair CP fancy type 125 mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or GI/Kitec fitting complete all as specified and directed |
| 44 | S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium door and high density plastic ball screwed for 15 mm dia iron pipe. |
| 45 | S&F in repair of 15 mm Pillar taps, fancy type cast copper alongwith capstan heads, chromium plated,swan neck screwed down high pressure , with or without coppered ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified. |
| 46 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed. |
| 47 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed. |
| 48 | S&F in repairs plastic water closet seat cover good quality in any colour(as required at site) with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and directed by Engineer - in -Charge. |
| 49 | S&F in repairs mild steel chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories, Fixed in repairs, complete all as specified and directed. |
| 50 | S&F in repair of hand shower (Health foucet) cast copper alloy chromium plated with and including 8mm dia 1.00 meter long PVC flexible tube and with hook complete all as specified and directed. |
| 51 | S&F in repair PVC waste pipe 900mm long flexible for Sink/ WHB of 32mm size complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 53 | S&F in repairs Vitreous China squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 54 | S&F in repairs Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, complete all as specified and directed by Engineer - in -Charge. |
| 55 | S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed. |
| 56 | S&F in repairs of Vitreous China urinals, Half stall (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and as directted. |
| 57 | S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 58 | S&F in repairs of looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified. |
| 59 | S&F in repair PVC cabinet mirror of size 400mmx500mm as approved by Garrision Engineer. |
| 60 | Taking down and Refixing of WHB/SINK to existing position including change of rusted bracket/ fastener as required at site, including refixing of existing piller tap/pvc connection/waste pipe/grating/bib tap etc and making good with white cement/grey cement to match existing surface complete all as specified and directed. |
| 61 | S&F in repairs CP grating 75/100 mm dia/hinged circular of approved make and fixing with cement mortar 1:3 as in repair with/without holes as required complete all as specified. |
| 62 | S&F in repair CP waste coupling suitable for 32 /40 mm bore pipe complete all as specified and directed. |
| 63 | S&F in repair CP waste coupling for sink of size 75/100 mm bore pipe complete all as specified and directed. |
| 64 | S&F in repairs of towel rail 600 mm long, 20 mm dia, ‘D’ type, brass chromium plated, fixed to walls with screws and plastic cleats, complete all as specified. |
| 65 | S&F in repair CP towel ring of dia 300mm fixed with rawal plug and steel screws for repair complete all as specified. |
| 66 | S&F in repairs rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws as fixed in repairs, complete all as specified and directed. |
| 67 | S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. |
| 68 | Supply and fix, Chromium plated soap dish, as in repairs, complete all as specified and directed. |
| 69 | Clearing of air lock in GI pipe of 15/20mm dia and making the water supply available upto water taps incl attending the complaints of no water supply including all necessary fitting as required at site complete to clear the complaint all as specified and directed. |
| 70 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified. |
| 71 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified. [Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required for highrise Bldg. 2. No extra payment made to contractor for patchwork or work in small repair as reuired at site/as directed.] |
| 72 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. [Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required as in highrise bldg.2 .No extra payment made to contractor for patchwork or work in small repair as reuired at site/as directed.] |
| 73 | M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & bottom of chajjas, beams, balcony ceiling, roof slab ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge.[Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required as in highrise bldg.2 .No extra payment made to contractor for patchwork or work in small repair as reuired at site/as directed.] |
| 74 | Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed. |
| 75 | Material & Labour for preparing the old wall surfaces by scraping and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over |
| 76 | M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified. |
| 77 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 78 | Material and labour, PCC (1:2:4), 40mm thick, type B-1 using 20mm graded mechanically crushed stone aggregates, as in flooring, finished even & smooth using extra cement @1.2Kg/Sqm, laid in panels, complete all as specified and directed. |
| 79 | M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. Please Enable Macros to View BoQ information |
| 80 | M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender