Tender For Special Repair To Y Neck Angle Iron With Barbed Wire And Concertina Coil And Security Light Along The Security/Perimeter Wall At Hq Afc, Svp And Addn/Altn To Boundary Wall At Bldg No P-831 At Vayu Vihar, Brookshabad Af Stn, Sri Vijaya Pura
Tender Value
34.57 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
24 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Y Neck Angle Iron With Barbed Wire And Concertina Coil And Security Light Along The Security/Perimeter Wall At Hq Afc, Svp And Addn/Altn To Boundary Wall At Bldg No P-831 At Vayu Vihar, Brookshabad Af Stn, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and as directed. |
| 3 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of soil complete all as specified and as directed. |
| 4 | Demolition of PCC Block walling built in cement mortar complete all as specified and as directed. |
| 5 | M&L for Precast cement concrete 1:3:6 , type C1, (20mm graded stone aggregate ) block masonry with solid block exc 10cm in width and setting in cement mortar 1:6, complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and removing rubbish out side of the MD Land complete all as specified and as directed. |
| 7 | M&L for Rendering in cement moratr 1:4, 10 mm thick, in on fair faces of bricks walls/concrete surface, finished even and smooth without using extra cement including water proofing compound complete all as specified and as directed. (water proofing compound shall be measured and paid seperately) |
| 8 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 9 | M&L for Preparation of newly plastered surfaces of walls/concrete and applying two coats of weather proof anti fungal paint (Apex - ultima) over a coat of primer and a coat of external wall putty all as per manufacturer instruction including necessary scaffolding complete all as specified and as directed. |
| 10 | M&L Plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping etc., including necessary formwork complete all as specfied and as directed. |
| 11 | Dismantling wrought iron (or) mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 12 | S&F Framed brackets of angles or tees with web and flanges, cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plate, riveting etc n exc 10kg each brackets conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 13 | S&F in Repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured) |
| 14 | M&L for Preparation of new steel surfaces of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 15 | S&F Punched type concertina coil A1 with wire spiral of 50 turns having a core wire high carbon spring steel of high tensile strength and a low carbon steel strip of 19mm wide 0.5mm thick having series of sharp barbs punched all along the core wire dia of coil when opended to 15mtrs with height of 915 + 50mm tolerance with weight of one coil not less than 15.20 kg (+/-) 5% nominal dia of uncoated wire shall be 2.60mm with permissible variation of (+/-)0.035mm, minimum tensile strength of wire 167N/mm2 as per IS 1608,minimum torsion shall be 22 as per IS 1717 and weight of Zinc coating 230 g/mm2. The concertina coil straining and fixing over barbed wire supported with Y angle including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc, complete all as specified and as directed. (Note:-GI Barbed wire and MS angles are measured and paid separately) |
| 16 | M & L for Preparation of old treated / un treated wall / concrete surfaces and applying two coats of wheather proof exterior acrylic emulsion paint with anti fungal property complete all as specified and as directed. |
| 17 | M&L for Cutting into or through existing concrete column/wall and providing with fixing stainless steel (Grade 304) railing/Drain cover made of hollow tubes, channels, plates etc incl welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, incl fixing the railing with necessary & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of the waist slab with suitable arrangements complete all as specified and as directed. |
| 18 | Supply and fix best quality shera planks 8mm thick, as in claddings of approved colour and coat complete with necessary screws, studs, bolts etc to metal frame complete, (Note:- Frame work if any will be measured and paid seperately) |
| 19 | Supply & Laying of XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 10 Sqmm 4 Core in trenches/along the wall/including making all connections, saddles, complete wih aluminium lugs as required at site complete all as specified and as directed. |
| 20 | Supply and laying of HDPE double wall corrugated pipes confirming to IS-14930 Part II for cable protection of size 50 mm OD and 38 mm ID including all acessories such as bend, end caps and couplers etc, complete all as specified and as directed. |
| 21 | M&L for Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC 1:3:6, type C-1, chamber with RCC cover 1:2:4, type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification complete all as specified and as directed. |
| 22 | M&L for Cutting Bittumen Road Hard top at site as required for Laying of Pipe line and making good of disturbed surface as per existing top with 20/40mm graded stone aggregate and bitumen layer etc after repair work complete all as specified and as directed. |
| 23 | Disconnecting and taking out old defective LT UG Cable with aluminium conductor of any size/type from trenches/walls/poles complete all as specified and as directed. |
| 24 | Taken down old unserviceable LED lights fittings on existing poles of any height complete all as specified and as directed. |
| 25 | M & L for Demolition of old existing RCC poles complete with PCC foundation and removel of all debiries including old poles from existing location complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 26 | M & L for Demolition of old existing RCC poles complete with PCC foundation and removel of all debiries including old poles from existing location complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender