Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #57142346

Tender For Repair Of Area Drainage, Culvert, Pathway And Other Related B/R Works At Zone 7 & 7A Md Accn & Otm Accn Under Ge(N) Tezpur.

Issued by Statutory Bodies & Commissions/Committees · Sonitpur, Assam
Tender Value
40 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair Of Area Drainage, Culvert, Pathway And Other Related B/R Works At Zone 7 & 7A Md Accn & Otm Accn Under Ge(N) Tezpur.

BOQ

Name of Work:- REPAIR OF AREA DRAINAGE, CULVERT, PATHWAY AND OTHER RELATED B/R WORKS AT ZONE 7 & 7A MD ACCN & OTM ACCN UNDER GE(N) TEZPUR.
Sl. No. Item Description
1BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : REPAIR OF AREA DRAINAGE, CULVERT, PATHWAY AND OTHER RELATED B/R WORKS AT ZONE 7 & 7A MD ACCN & OTM ACCN UNDER GE(N) TEZPUR. Contract No : GE(N)/TEZ/ OF 2026-2027 (8276) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words)
2Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete in all respect as specified and directed.
3Dismantalling of Brick work, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, and pre-cast concrete articles complete in all respect as specified and directed.
4Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm internal dia complete in all respect as specified and directed.
5Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed.
6M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete in all respect as specified and directed.
7M & L RCC 1:2:4, type B1 using 20mm graded crushed stone aggregate of nominal size as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all respect as specified and directed.
8M & L RCC 1:2:4, type B1 1:2:4 using 20mm graded crushed stone aggregate of nominal size as in Columns, pillars, piers, posts and struts complete in all respect as specified and directed.
9M & L RCC 1:2:4, type B1 1:2:4 using 20mm graded crushed stone aggregate of nominal size as in Beams, cantilevers, bressummers, lintels over 1.5m span complete in all respect as specified and directed.
10Use and Waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finish of flat surface complete in all respect as specified and directed.
11Use and Waste formwork to Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete in all respect as specified and directed.
12Use and Waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete in all respect as specified and directed.
13M & L brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete in all respect as specified and directed.
14M&L 15mm thick rendering on brick work or concrete wall surfaces in cement mortar 1:4, finished even & smooth with using extra cement complete in all respect as specified and directed.
15M&L for preparation of new wall surfaces and applying two coats of weather coat over a of coat primer on external walls complete in all respect as specified and directed.
16Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete in all respect as specified and directed.
17Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed.
18M & L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking , bending spirally for hooping for columns, hooking and binding with and including mild steel wire (ammealed) not less than 0.9 mm dia complete in all respect as specified and directed.
19M & L mild steel deformed TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (ammealed) not less than 0.9 mm dia complete in all respect as specified and directed.
20S&F rolled mild steel in joist, angle, channel, beam, flat sections fixed independently without connecting plates etc of grade Fe-410W (GdeE-250) quality A complete in all respect as specified and directed.
21Dismantling of posts or struts (Wood, Steel or RCC) of any section and size including taking out embeded portion and making good disturbed ground posts embeded in cement concrete, brick work, masonary complete in all respect as specified and directed.
22Excavation in post holes (or similar holes) each not exc. 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50 mtr in soft/loose soil complete in all respect as specified and directed.
23Dismantling of fencing wire mesh including tie rods, flat iron etc any type, complete in all respect as specified and directed.
24Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
25Supply GI chain link fencing of wire of , 3mm wire dia with aperture of chainlink is 100mm x 100mm including tieng the fencing with same material at top and bottom edges complete all as specified and directed.
26S F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
27S&F Concertina wire coil, size 600mm dia with wire dia 2.65-3.0mm complete all as specified and directed
28Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc. complete in all respect as specified and directed.
29M & L for extra forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc for 300mm girth .complete in all respect as specified and directed.
30M&L brick work sub class B, class designation 75 old size bricks, laid flat in floors, walls or of similar types, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete in all respect as specified and directed.
31All as per Item No.29here-in-before but except bricks including cleaning, de-mortaring of bricks as retreived under respective items of the schedule complete in all respect as specified and directed.
32M&L brick work sub class B, class designation 75 old size bricks, laid on edge in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete all as specified and directed.
33All as per Item No.31 here-in-before but except bricks including cleaning, de-mortaring of bricks as retreived under respective items of the schedule complete in all respect as specified and directed.
34M&L for PCC 1:3:6 type C1 (using 20mm nominal size crushed and graded stone aggregate) as in surface channels & drains complete in all respect as specified and directed.
35M & L for 300mm internal dia of Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches complete in all respect as specified and directed.
36M&L for plinth protection or in foot path of 75 mm thick of cement concrete using type C-1, 1:3:6 (using 20 mm nominal size crushed and graded stone aggregate) in alternate penals and finished fair and even complete in all respect as specified and directed.
37M&L precast cement concrete type B0 1:2:4 (using 12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar (1:4) complete in all aspect as specified and directed
38Providing precast cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) in cover slab (Drain) chullah hoods, chajjas, water troughs, mangers shelves and similar article with plain face set in cement mortar 1:4 complete in all respect as specified and directed.
39M & L PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate in coping, hold fasts or of similar items including necessary cutting, form work etc. complete in all respect as specified and directed.
40M & L 40 mm thick PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate laid in alternative bays finished the surface even and fair without using extra cement complete in all respect as specified and directed.
41M&L for sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed.
42M & L for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
43M&L in repairs for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete in all respect as specified and directed.
44Providing & laying heavy duty non skid coloured digital printed floor tiles of area exc. 0.09Sqm but n.exc.0.16 Sqm, 8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed.
45S & F for coloured rubber moulded, glazed pre coated chequered cement concrete tiles of 30cm x 30cm x 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over include 15mm thick screed bed in CM 1:4 complete in all respect as specified and directed.
46M&L for preparation of new steel surfaces of any width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
47M&L for preparation of old steel surfaces of any width or girth and applying one coat of synthetic enamel paints complete all as specified and directed.
48M & L for Running welding in repairs exc. 2.5cm but n. exc 5cm in length and exc. 9mm but not exc 20mm complete in all respect as specified and directed. (Note: Welding machine and rod is included in this item, the site is spread in wide spread area, Contractor must quote the rates accordingly)
49Preparaing old decorated plastered or unplastered surface of wall and apply two coats of white wash including scrapping down of old white wash completely complete in all respect as specified and directed.
50M&L for complete removal of existing treatment on walls, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots by scraping with vaccum based sanding machine, washing with water all as specified, filling cracks/ hole by wall care putty (multipurpose mixer shall be used for uniform & proper mixing of putty) and applying two coat of cement base paint white over a coat of alkali resistent priming paint coloured by auto roller complete in all respect as specified and directed as per manufactures instruction. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57142346
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40 Lakhs
LAST DATE 11-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair Of Area Drainage, Culvert, Pathway And Other Related B/R Works At Zone 7 & 7A Md Accn & Otm Accn Under Ge(N) Tezpur.
Basic Detail
Tender No GE(N)/TEZ/2026-27/8276
Bidding Type Tender
Location
City Sonitpur
State Assam
Key Dates
Publish Date 21 Aug 2026
Submission Date 11 Sep 2026
Open Date 12 Sep 2026
Finance
Tender Value 40 Lakhs
Tender Fee 500
EMD 80000
Exemption Available
Document List
12c06341-68ba-4c66-bfd2-83855bacec25.html
BOQ_880520.xls
TenderDOCUMENTS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Sep 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

12c06341-68ba-4c66-bfd2-83855bacec25.html

xls

BOQ_880520.xls

pdf

TenderDOCUMENTS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders