Tender For special Repair To Sewage Line, Septic Tank And Soakage Well In Bhagat Line, Rsv Under Age B/R-Ii Of Ge (West) Lucknow
Tender Value
37.99 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
75980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Sewage Line, Septic Tank And Soakage Well In Bhagat Line, Rsv Under Age B/R-Ii Of Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and removal of wild grass/shurps,roots including spraying of deweding chemical 1 m each side on both side along sewage line complete all as specified and directed |
| 2 | Excavation in trenches n.exc 1.5M wide and N.exc 1.5M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in soft/loose soil complete all as specified and directed |
| 3 | Excavation in tr enches n.exc 1.5M wide and N.exc 3.0 M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in hard/dense soil complete all as specified and directed |
| 4 | M & L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations / fillings and mass concrete incl demolition complete all as specified and directed |
| 5 | Returning, filling and including spreading levelling,watering and well ramming in layers n.exc 25cm complete all as specified and directed |
| 6 | Removing excavated soil n.exc 50mand depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed |
| 7 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 8 | M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manhole, drains etc) with plain fair faces, incl demolition complete all as specified and directed |
| 9 | M & L for brick work using old size bricks conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) including demolition complete all as specified and directed |
| 10 | M&L Cutting into road/black top/PCC pavement of any thickness including excavation in any type of soil upto 0.50 m to 0.80 m width and 0.50m to 1.50m in depth,refilling,compaction of soil after laying of PCC bed,haunching and pipe and packing and compaction with existing soling/GSB/WBM/WMM and top surface prepared with 75mm thick cement conrete 1:2:4 type B-1 ( Using 20 mm graded aggregate) complete all as specified and directed. |
| 11 | M&L for rendering/plaster by using ready mix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, complete all as specified and directed |
| 12 | Demoliton/breaking up of drain pipes of 150mm internal dia (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site complete all as specified and as directed. |
| 13 | Demoliton/breaking up of drain pipes of 200mm internal dia (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site complete all as specified and as directed |
| 14 | Demoliton/breaking up of drain pipes of 300mm internal dia (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site complete all as specified and as directed |
| 15 | S&F DWC (Double wall corrugated) 150 mm dia pipes manufactured as per IS-16098(part-2) having internal surface smooth and external corrugated surface of SN 4 stiffness laid and jointed complete all as specified and as directed |
| 16 | S&F DWC (Double wall corrugated) 200 mm dia pipes manufactured as per IS-16098(part-2) having internal surface smooth and external corrugated surface of SN 4 stiffness laid and jointed complete all as specified and as directed |
| 17 | S&F DWC (Double wall corrugated) 300 mm dia pipes manufactured as per IS-16098(part-2) having internal surface smooth and external corrugated surface of SN 4 stiffness laid and jointed complete all as specified and as directed |
| 18 | M&l for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after pipes they are laid and tested, internal dia of pipes 150mm complete all as specified and directed |
| 19 | M&l for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after pipes they are laid and tested, internal dia of pipes 200mm complete all as specified . |
| 20 | M&l for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after pipes they are laid and tested, internal dia of pipes 300mm complete all as specified and directed |
| 21 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100/150/200 mm internal dia of pipe complete all as specified and as directed |
| 22 | M&L for Precast manhole chamber of circular inner dia 800mm & over all height 600 mm thickness of Precast chamber and reinforcement,weight & other details as per drg. The Precast manhole is made of high performance self compacting concrete (SCC) of M-40 grade with high tensile tendon steel, cured under controlled factory conditions. All manufacturing process must comply with Indian standards. The curing process must be maintained using RO water and chiller plants for quality assurance. The formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components. Hole of dia 100/150/200 mm shall be made by concrete core cutting and joint shall be fixed with Non-shrink cementations grouts/paste shall have a minimium compressive strength of 50N/mm2 at 7 days. Manhole Chamber shall be laid over and including 100 mm thick PCC complete all as specified and shown on drg & directed by Engineer-in-ChargeNote:- The work shall be carried out through MOU of pre-cast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly. |
| 23 | M&L for Precast manhole chamber of circular inner dia 800mm & over all height 800 mm thickness of RCC and reinforcement,weight & other details as per drg. The Precast manhole is is made of high performance self compacting concrete (SCC) of M-40 grade with high tensile tendon steel, cured under controlled factory conditions. All manufacturing process must comply with Indian standards. The curing process must be maintained using RO water and chiller plants for quality assurance. The formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components. Hole of dia 100/150/200 mmshall be made by concrete core cutting and joint shall be fixed with Non-shrink cementations grouts/paste shall have a minimium compressive strength of 50N/mm2 at 7 days.Manhole Chamber shall be laid over and including 100 mm thick PCC complete all as specified and directedNote:- The work shall be carried out through MOU of pre-cast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly. |
| 24 | M&L for Precast manhole chmaber of circular inner dia 800mm & over all height 1000 mm thickness of RCC and reinforcement,weight & other details as per drg. The Precast manhole is made of high performance self compacting concrete (SCC) of M-40 grade with high tensile tendon steel, cured under controlled factory conditions. All manufacturing process must comply with Indian standards. The curing process must be maintained using RO water and chiller plants for quality assurance. The formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components. Hole of dia 100/150/200 mmshall be made by concrete core cutting and joint shall be fixed with Non-shrink cementations grouts/paste shall have a minimium compressive strength of 50N/mm2 at 7 days.Manhole Chamber shall be laid over and including 100 mm thick PCC complete all as specified and directed Note:- The work shall be carried out through MOU of pre-cast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly. |
| 25 | M &L of Precast LD manhole cover of size suitable for manhole of 800 mm dia. Thickness of RCC and reinforcement,weight & other details as per drg .The preacst manhole cover is made of high performance self compacting concrete (SCC) of M-25 grade with high tensile tendon steel, cured under controlled factory conditions. All manufacturing process must comply with Indian standards. The curing process must be maintained using RO water and chiller plants for quality assurance. The formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components. complete all as specified and directed Note:- The work shall be carried out through MOU of pre-cast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly. |
| 26 | M&L plain cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in benching,copings etc, including necessary form work and incl demolitiom of existing complete all as specified and as directed |
| 27 | M & L framed work such as grills, gratings,jallis etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismentling of RCC complete all as specified and directed |
| 28 | M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed |
| 29 | M & L cement concrete chequered tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments laid over and including Screed bed or bedding layer of 15 mm thick in Cement mortar 1: 6 for laying floor finishes incl demolition complete all as specified and directed. |
| 30 | M&L for Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,length, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern incl dismentling complete all as specified and directed |
| 31 | Supply and fixing of 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc.including Cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed. |
| 32 | M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint complete all as specified as directed. |
| 33 | M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 34 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 35 | S & F 110 mm bore PVC (SWR) bends complete all as specified and directed |
| 36 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed |
| 37 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 38 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even incl demolition complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender