Tender For Reparation / Modification Of Furniture Of Married /Otm Accn Under Ge (Nb) Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reparation / Modification Of Furniture Of Married /Otm Accn Under Ge (Nb) Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefully old Unserviceable/Worn Out/broken components of Wooden/Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Decorative laminate sheets, Edge Banding & Finishing, Mild Steel Sections, Iron mongery fittings, Glass fixing/fittings, Builders Hardware, Tapestry Cloth, Foam, Upholstery & Diamond Button-Tufting , Plastic Cane, Cotton/Nylon Newar etc.and Wood Work made of 1st Class Hard Wood (Teak Wood), seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, applying putty, gluing, providing hinges,handles/knobs, polishing/painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings,as specified,as brief description of items and as directed by Engr-in-Charge. All furniture items shall be painted/polished only after completing all repairs and renewals work etc, preparation of steel/iron/wooden surface by removing of old paint/polish by using grinding machine, taking out dents & filling metal putty/wood filler to the uneven surfaces, after thoroughly preparation the surfaces of the furniture articles, then apply spray painting/polishing with two coat of synthetic enamel paint/ melamine polish. The furniture shall be repaired/ renewed, Painted/Polished on site . Work will be executed inside the Barrack Store Yard of GE(NB) Vizag and at various sites as per requirement as directed by Engr-in-Charge without fail. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture. Rate quoted is deemed to be including the same. |
| 2 | LOCKER BEDSIDE STEEL : FD-1029 |
| 3 | S & F of 75x40 mm size 3 mm thick hasp & staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws to various type of furniture articles in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 4 | S&F of stainless steel conduit pipe of 20 mm dia of lengh 380 mm incluing two socket to support conduit pipe in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge |
| 5 | M & L for repair to LOCKER BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of locker by unriveting and using hand held cutting machine carefully without disturbing the adjoining part and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 600x100x100mm fixed to locker to the existing place through welding and riveting, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 6 | Taking down/removing the existing broken /unserviceable MS hinges of size 75 mm from Door Shutter of Locker bedside steel carefully without disturbing the adjoining part including Supply and fixing new hinges, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 7 | M & L for repair to LOCKER BED SIDE STEEL by taking down/removing the existing broken /unserviceable dented/hanging Door Shutter (size 1020 x 380 mm) carefully without disturbing the adjoining part re-fixed the same to Locker bedside steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 8 | M & L for repair to LOCKER BED SIDE STEEL by taking down/removing the existing broken /unserviceable Door Shutter (size 1020 x 380 mm) carefully without disturbing the adjoining part and supply & fixing of new Door Shutter made out of 1 mm thick MS sheet of same size 1020 x 380 mm duly fixed to Locker bedside steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 9 | M&L for painting to LOCKER BED SIDE STEEL by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Locker Bed Side Steel, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 10 | TABLE FOR HAVS AND ORS : FD-223 |
| 11 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Legs carefully without disturbing the adjoining part and replacing the same with new Legs of size 60 x 60 at top and 30 x 30 at bottom of long 760 mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 12 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top Long Rail carefully without disturbing the adjoining part and replacing the same with new Top Long Rail of size 900mmx65mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 13 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top Short Rail carefully without disturbing the adjoining part and replacing the same with new Top Short Rail of size 600mmx65mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 14 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top carefully without disturbing the adjoining part and replacing the same in position with new Top made of 18mm thick prelaminated MDF board, exterior grade of size 900mm x 600mm, apply 4mm thick, heavy-duty, impact-resistant PVC edge banding tape matching the MDF board using hot-melt adhesive at temperatures >180°C via an edge-banding machine. Alternatively, create a T-slot on the MDF edge with a special router and mechanically insert/glue a T-profile PVC tongue-beading. complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 15 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable bottom Stiifener carefully without disturbing the adjoining part and replacing the same with new bottom Stiifener of size 900mmx40mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 16 | M&L for Polishing to TABLE FOR HAVS AND ORS by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE FOR HAVS AND ORS, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 17 | TABLE DINING OR : FD-165 |
| 18 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply & fixing new Leg made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 760mm high by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 19 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Long Rail by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply & fixing new Long Rail made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 1600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 20 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Short Rail by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply & fixing new Short Rail made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 515mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 21 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable foot rest by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply & fixing new Long foot rest made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 1600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 22 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Side Stiffner by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply & fixing new Side Stiffner made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 515mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 23 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Aluminium Top Sheet carefully without disturbing the adjoining part and supply & fixing new Aluminium Top Sheet of 22 Gauge of size 1975x760mm having glossy finish fixed to table top, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 24 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Top carefully without disturbing the adjoining part and supply and fixing new Top of size 1900x685mm made of 18mm thick plywood, BWR grade by using suitable screws/nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 25 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Screws from Top carefully without disturbing the adjoining part and replaceing with new MS Screw nails of 40mm long and fixed properly the Top of table, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 26 | M&L for painting to TABLE DINING OR by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Table Dining ORs, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 27 | CHARPOY DOUBLE BUNK : FD-112(M)/263/GE(NB)-99 & 103 |
| 28 | M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /unserviceable Plywood from the both berth carefully without disturbing the adjoining part and S & F new 12mm thick plywood, BWR grade-AA of size 2030x910 mm by making necessary cutting, edges duly fixed on GI pipe frame of the both berth with 10mm dia nuts, bolts and washer, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 29 | S & F of 25 mm square MS Pipe of 1.6 mm thick of 910 mm length of approved brand, duly welded the ends to the long rail at an equal distance underneath rails for better grip while placing the Ply top, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 30 | M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /unserviceable FI clamp of size 100x40x6 mm carefully without disturbing the adjoining part and S & F/Welding the same to achieve stability to existing base stiffner for each berth, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 31 | S&F of 9 mm dia machine screw for upper and lower berth in the charpoy in lieu of broken/dismantled one, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 32 | S&F of 25x3 mm FI clamps for holding MNF in lieu of existing broken one, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 33 | M&L for painting to CHARPOY DOUBLE BUNK by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Charpoy Double Bunk, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 34 | DESK AND BENCH (NSB) : SKT-01 |
| 35 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Desk Top with plank carefully without disturbing the adjoining part and supply and fixing new Desk Top of size 910x350mm made of 18mm thick Plywood BWR grade duly covered with 1.5mm thick decorative laminated sheet with approved adhesive and with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails, carve a long, shallow recess along the top edge of the desk to prevent pens and pencils from rolling off with provision of 1st class teak wood plank including two coat melamine polish duly fixed in position made to shape and size completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 36 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Bench Top with plank carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 910x275mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails with provision of 1st class teak wood plank including two coat melamine polish duly fixed in position made to shape and size completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 37 | M&L for painting to DESK AND BENCH (NSB) by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Desk and Bench (NSB), then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 38 | BIN SOILED LENIN SMALL (CANE) 750X450X450 : FD-15 / 244 |
| 39 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable legs carefully without disturbing the adjoining part and supply and fixing of new Stainless Steel legs, Size 3 inches Hight & 75mm Dia, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 40 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable short stiffener carefully without disturbing the adjoining part and supply and fixing of new short stiffeners of size 400x19 mm of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 41 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable vertical member carefully without disturbing the adjoining part and supply and fixing of new vertical member of size 45x45 mm of 1st class teak wood as per drg, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 42 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable top rail carefully without disturbing the adjoining part and supply and fixing of new top rail of size 45x19 mm of 1st class teak wood as per drg, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 43 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable bottom rail carefully without disturbing the adjoining part and supply and fixing of new bottom rail of size 57x19 mm of 1st class teak wood as per drg, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 44 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable plywood from top carefully without disturbing the adjoining part and supply and fixing of new Lid type Top of Apprx Size 900mmx450mm made of 10 mm thick Frosted Solid Polycarbonate Sheet with Recessed Bottom-Mounted Track with Nylon Rollers:Replaces the top-mounted roller tracks with inverted, self-cleaning bottom tracks.Prevents lint, hair, and dust from clogging the glide path, lid can glide open and closed smoothly, complete all as specified, shown on drawing and as directed by Engr-in-Charge.. |
| 45 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable plywood from front/back carefully without disturbing the adjoining part and supply and fixing of new 6 mm thick BWR plywood, one side teak finished (Apprx size 350x730 mm) including two coat melamine polish duly fixed in position made to shape and size completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 46 | M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out TW edging carefully without disturbing the adjoining part and supply and fixing of new edging of size 6x25 mm of 1st class teak wood , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 47 | M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out cane from sides and supply & fixing of new sides made of 6 mm thick Frosted Solid Polycarbonate Sheet, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 48 | M&L for Polishing to Bin soiled lenin (Cane) by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Bin soiled lenin (Cane), then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 49 | DESK AND BENCH (NSB) : SKT-02 |
| 50 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Desk Top with plank carefully without disturbing the adjoining part and supply and fixing new Desk Top of size 910x420mm made of 18mm thick Plywood BWR grade duly covered with 1.5mm thick decorative laminated sheet with approved adhesive and with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails, carve a long, shallow recess along the top edge of the desk to prevent pens and pencils from rolling off with provision of 1st class teak wood plank including two coat melamine polish duly fixed in position made to shape and size completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 51 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Bench Top with plank carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 910mmx320mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails with provision of 1st class teak wood plank including two coat melamine polish duly fixed in position made to shape and size completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 52 | M&L for painting to DESK AND BENCH (NSB) by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Desk and Bench (NSB), then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 53 | CHAIR VARENDAH (MESS) : FD-359 |
| 54 | M & L for repair to CHAIR VERANDAH (MESS) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully without disturbing the adjoining part and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 55 | M & L for repair to Chair Verandah (Mess) by taking down/removing the existing unserviceable worn out cane from the Seat & Back of Chair Verandah (Mess) carefully and S & F 2 Nos mild steel strip of 460mm long, 25mm wide and 5mm thick duly two coat of enamel paint of approved color over a coat of red oxide primer & fixed by proper gas welding with suitable Nut/Bolts/Powder coating screws as required in vertical and horizontal for support of Seat & Back respectively, then S&F new Seat & Back size 460mmx460mmx50mm made by using pressure-treated plywood 8mm and add padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape duly covered with inner linen cotton cloth and best water resistant cloth of approved color and texture of rate not less than 250 per meter. Stitching & Fasten the Seat & Back cushion of Chair Verandah (Mess) by Adjustable Elastic Straps with Metal Adjuster Slide Buckles/Any suitable machanism as per requirement with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 56 | M & L for Repairs to Chair Verandah (Mess) by taking down the existing broken /unserviceable/worn out PVC shoe carefully without disturbing the adjoining parts and Replace with new one for 20mm dia to the legs of chair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 57 | M&L for painting to Chair Verandah (Mess) by two coats of synthetic enamel paint of approved shade (milk white) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the Chair Verandah (Mess), then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 58 | CHAIR DINING LONG BACK ( OFFICER MESS) : TP/SK-15 |
| 59 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining part and Supply and fixing of new Rear leg of size 30x30x990 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 60 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining part and supply and fixing of new Front leg of size 50x50x460 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 61 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable side rail/Front/back rail (seat base) carefully without disturbing the adjoining part and and supply and fixing of new side rail/Front/back rail (seat base)of size 25x50x370 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 62 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining part and supply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 25x50x405 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 63 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest frames carefully without disturbing the adjoining part and supply and fixing of new Back rest frames of size 25x20x500 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 64 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest Top stiffener carefully without disturbing the adjoining part and supply and fixing of new Back rest Top stiffener of size 25x45x380 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 65 | M & L for repair to CHAIR DINING LONG BACK by taking down the existing broken /unserviceable wooden corner triangular bracket carefully without disturbing the adjoining part and replacing the same with new powder coated metal corner brackets with screws of Size 100x100x25mm duly fixed with suitable mechanisms, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 66 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply & fixing of new seat of size 430 x 460 mm made of 12 mm thick BWR Ply wood, 40 density & 50mm thick PU foam duly covered with inner linen cotton cloth and best quality tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over the hard wood frame around,duly fixed with counter sunk screws from beneath through corner brackets. The seat shall also be covered with plastic transparent film complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 67 | M&L for Polishing to CHAIR DINING LONG BACK by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Chair Dining Long Back, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 68 | CHAIR DINING OVAL BACK (OFFICER MESS) : TP/SK-16 |
| 69 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining part and supply and fixing of new Rear leg of size 30x30 (bottom), 45x45 (centre) and 50 x 50(top) of length 900 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 70 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining part and supply and fixing of new Front leg of size 30x30 (bottom), 45x45 (centre) and 50 x 50(top) of length 400 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 71 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable side/front rail (seat base) carefully without disturbing the adjoining part and supply and fixing of new side /front rail (seat base)of size 25x60x420 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 72 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rail (seat base) carefully without disturbing the adjoining part and supply and fixing of new back rail (seat base)of size 25x60x360 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 73 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining part and supply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 25x25x420 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 74 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rest frame carefully without disturbing the adjoining part and supply and fixing of new back rest frame of size 15x20x440 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 75 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rest Top stiffener carefully without disturbing the adjoining part and supply and fixing of new back rest Top stiffener of size 25x 60 x 460 mm (curve shaped) made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 76 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply & fixing of new seat of size 430 x 360 mm made of 12 mm thick BWR Ply wood, 40 density & 50mm thick PU foam duly covered with inner linen cotton cloth and best quality tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over the hard wood frame around,duly fixed with counter sunk screws from beneath through corner brackets. The seat shall also be covered with plastic transparent film complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 77 | M&L for Polishing to CHAIR DINING OVAL BACK by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Chair Dining Oval Back, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 78 | CHAIR DINING LONG BACK (VISAKHA) : TP-VISAKHA |
| 79 | M & L for repair to CHAIR DINING LONG BACK (VISAKHA) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining part and supply and fixing of new Rear leg of size 40x40x900 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 80 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining part and supply and fixing of new Front leg of size 45x45x400 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 81 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable side rail carefully without disturbing the adjoining part and supply and fixing of new side rail of size 25x60x420 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 82 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front/back rail (seat base) carefully without disturbing the adjoining part and supply and fixing of new Front/back rail (seat base) of size 25x70x420 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 83 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining part and supply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 45 x 25 x 430 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 84 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest horizontal frames carefully without disturbing the adjoining part and supply and fixing of new Back rest horizontal frames of size 90 x 30 x 400 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 85 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining part and supply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 20 x 35 x 420 mm made of 1st class Teak wood including tightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 86 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply & fixing of new seat of size 500 x 490 mm made of 12 mm thick BWR Ply wood, 40 density & 50mm thick PU foam duly covered with inner linen cotton cloth and best quality tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over the hard wood frame around,duly fixed with counter sunk screws from beneath through corner brackets. The seat shall also be covered with plastic transparent film complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 87 | M&L for Polishing to CHAIR DINING LONG BACK by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Chair Dining Long Back, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 88 | HAT STAND SMALL /LARGE (WITH MIRROR) : FD-361 / 362 |
| 89 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Front Face carefully without disturbing the adjoining part and replacing the same in position with new Front Face made of 4mm thick teak faced BWR plywood of size 1000mm x 710mm fixed with suitable screw/adhesive, including painting with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge.. |
| 90 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Front Face carefully without disturbing the adjoining part and replacing the same in position with new Front Face made of 4mm thick teak faced plywood of size 1330mm x 710mm fixed with suitable screw/adhesive, including painting with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 91 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Looking Mirror carefully without disturbing the adjoining part and replacing the same with new Looking Mirror of size 440mmx300mm made of 5mm thick glass with a high-tensile safety film backing (Category II shatter-proof) duly fixed with teak wood beading made of 10mmx12mm section as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 92 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Back carefully without disturbing the adjoining part and replacing the same in position with new Back made of 6 mm thick BWR plywood of size 1000mm x 710mm fixed with suitable screw/adhesive, including painting with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 93 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Back carefully without disturbing the adjoining part and replacing the same in position with new Back made of 6 mm thick BWR plywood of size 1330 mm x 710mm fixed with suitable screw/adhesive, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 94 | S & F of Stainless Steel Pegs of size 75x120mm duly fixed with brass screw as required in repairs , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 95 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Teak Wood Beading carefully without disturbing the adjoining part and replacing the same with new Teak Wood Beading of size 35mmx6mm fixed with screws as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 96 | M&L for Polishing to HAT STAND WITH MIRROR by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the HAT STAND WITH MIRROR, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 97 | BED HARD PLY TOP (FD-213 / 264) |
| 98 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden long rail carefully without disturbing the adjoining part and replacing the same with new long rail of size 1980x90x35mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 99 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Short rail at Foot/Head board carefully without disturbing the adjoining part and replacing the same with new Short rail of size 900x40x60mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 100 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Batten from Head & Foot board carefully without disturbing the adjoining part and replacing the same with new Batten of size 60x30x840mm made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 101 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Vertical Batten from Head & Foot board carefully without disturbing the adjoining part and replacing the same with new Vertical Batten of size 75x22x220mm made of well seasoned soft wood after cutting, made to shape and size and equally spaced from each other before connecting Top or bottom battens inside Foot/Head board as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 102 | Material and labour (M & L) for repairs to the bed hard plywood top, headboard modification, and premium upholstery work, executed at the exact place and position as specified and workmanship shall conform to standard professional specifications as per direction of the Engineer-in-Charge. The scope of work includes: -Dismantling: Carefully taking down the existing broken or unserviceable 12mm diameter teak wood beading from the headboard without causing any damage or disturbance to the adjoining structures or finishes.Cushioning & Bonding: Supplying and applying a layer of 0.5-inch (12.5mm) thick, high-density (40-density) Polyurethane (PU) foam over a headboard area of 780mm x 260mm, securely bonded to the plywood substrate using an approved high-strength adhesive. [1]Upholstery Wrapping: Neatly covering and wrapping the foam layer with premium-grade faux leather (leatherette) of an approved shade, texture, and manufacturer, with a material market rate of not less than Rs 250.00 per meter, ensuring a completely seamless, tight, and wrinkle-free finish.Edging & Finishing: Enhancing and securing the upholstery assembly by supplying and fixing a 12mm diameter decorative crown moulding beading/trim all around its outer edges, utilizing a suitable and sturdy mechanical fixing mechanism. |
| 103 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable 4mm thick veneer ply from foot board at one side carefully without disturbing the adjoining part and replacing the same with new 4mm thick veneer/OST ply BWR grade of size 780x180mm, one side teak finished in position duly fixed with adhesive and headless nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 104 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable Beading from foot/head board carefully without disturbing the adjoining part and replacing the same with new Beading, 12mm dia decorative crown moulding beading/trim by using adhesive and headless nails, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 105 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden leg from head board carefully without disturbing the adjoining part and replacing the same with new leg of size 660x60x60mm at top and 660x30x30 mm at bottom, made of well seasoned first class teak wood after cutting, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 106 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden leg from foot board carefully without disturbing the adjoining part and replacing the same with new leg of size 500x60x60mm at top and 500x30x30 mm at bottom, made of well seasoned first class teak wood after cutting, made to shape and size as required, including painting with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 107 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden stiffner carefully without disturbing the adjoining part and replacing the same with new stiffner of size 900x40x60mm made of well seasoned first class teak wood after cutting, made to shape and size as required, including painting with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 108 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable plywood top carefully without disturbing the adjoining part and replacing the same with new 12mm thick plywood BWR Grade of size 1980mm x 900mm with 12 Nos of 40mm long countersunk wood screw, made to shape and size as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 109 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden corner triangular bracket carefully without disturbing the adjoining part and replacing the same with new powder coated metal corner triangular brackets with screws of Size 100x100x25mm duly fixed with suitable mechanisms, complete all as specified, shown on drawing and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 110 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden corner triangular bracket carefully without disturbing the adjoining part and replacing the same with new powder coated metal corner triangular brackets with screws of Size 100x100x25mm duly fixed with suitable mechanisms, complete all as specified, shown on drawing and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender