Tender For Repairs To Doors, Windows, Ventilators, Wardrobe, Cupboard, Wall Cladding And False Ceiling At Zone-I Under Ge Brichgunj, Sri Vijaya Puram.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
25 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Doors, Windows, Ventilators, Wardrobe, Cupboard, Wall Cladding And False Ceiling At Zone-I Under Ge Brichgunj, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting holes to facilitate the taking down and making good the surfaces etc complete all as specified and as directed. |
| 2 | All as per Item No.1.00 above but exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed. |
| 3 | Taking down shutters of any description n.exc 1.00 Square metre each complete all as specified and as directed. |
| 4 | Taking down shutters of any description exc 1.00 Square metre and n.exc 2.00 Square metre each complete all as specified and as directed. |
| 5 | Taking down shutters of any description exc 2.0 Square metre each complete all as specified and as directed. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), min compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 8 | All as per Item No.7.00 above but 35mm thick for skeleton shutter complete all as specified and as directed. |
| 9 | S&F Factory made uPVC Frames 60mm x 58mm white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and as directed.(Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 10 | S&F Factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame 60mm x 58mm, sash 60mm x 78mm. T profile (One vertical length in between two shutters) 60mm x 74mm. Glazing bead 35mm x 20mm will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame 28mm x 21.5mm, sash 31mm x 27mm, T profile 27mm x 17mm to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle (02 Nos), tower bolts (02 Nos), sliding bolt (01 No), Hinges (03 Nos) made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 11 | S&F Factory made uPVC Frames 88mm x 52mm white colour casement/sliding window/door three track, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and as directed. (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 12 | S&F Factory made uPVC white colour sliding window Three track (area n.exc 2sqm each) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame 88mm x 52mm, sliding sash 42mm x 67mm. Sliding mesh Sash 42mm x 57mm Sliding interlock (One vertical length in each shutters) 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame 30mm x 18mm, 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26mm x 10mm, profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 13 | S&F Factory made uPVC white colour fixed window area exc. 2 Sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame 60mm x 58mm. T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead 35mm x 20mm will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame 28mm x 21.5mm, T profile 27mm x 17 mm to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 14 | S&F Anodised aluminium frame for doors, Windows, Ventilators, Cupboards with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 15 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges (03Nos), anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 16 | S&F Anodised aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (2 no.) complete all as specified and as directed. |
| 17 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 18 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire cloth and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 19 | S&F Prelaminated particle board, 12mm thick , interior grade, prelaminated both side with decorative choice lamination and fixed to aluminium frames etc, complete all as specified and as directed. |
| 20 | Hacking out old broken glass (any thickness, size, quality or description) from frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/ clips etc complete all as specified and as directed. |
| 21 | S&F Sheet glass 4.0mm thick, ordinary quality in squares n exc 0.50 sq.m in each pane complete all as specified and as directed. |
| 22 | S&F 5mm thick figured glass, ordinary quality in squares exc 0.50 sq.m in each pane complete all as specified and as directed. |
| 23 | S&F in Repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and as directed. |
| 24 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and directed |
| 25 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed |
| 26 | S&F 150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed. |
| 27 | S&F Butt hinges 100 mm long, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 28 | S&F in Repairs mortice lock brass 4 levers, vertical type of size 100 mm, complete all as specified and as directed. |
| 29 | S&F in Repairs stainless steel cylindrical latch door lock (or tubular lock) operates with a key on the exterior and a turn-button or thumb-turn on the interior side etc complete all as specified and as directed. (Make : Godrej/ Hettich/ Hafele) |
| 30 | S&F in Repairs Stainless steel cylindrical plate heavy duty mortice door lock of size 200mm, handle set etc complete all as specified and as directed. (Make : Godrej/ Hettich/ Hafele) |
| 31 | S&F in repair uPVC door lock handle set includes a central latch/deadbolt, hook/mushroom locking points etc complete all as specified and as directed. |
| 32 | S&F Floor door stopper of length 150mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 33 | S&F in Repairs Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. (Make : Godrej/ Hettich/ Hafele) |
| 34 | S&F in Repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed. |
| 35 | S&F Toughned glass 10mm thick as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required with and including SS fittings like brackets, hinges and other builder's hardware etc complete all as specified and as directed. |
| 36 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 37 | M&L for Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over and a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 39 | M&L for Preparation of old plastered surfaces of walls and applying one coat of oil bound distemper etc complete all as specified and as directed. |
| 40 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed. |
| 41 | S&F Aluminium composite panel sheet 4mm thick (ACP) (interior grade) as in wall cladding, false ceiling and cup board with and including necessary items like strips/ sealant/adhesive etc complete all as specified and as directed. |
| 42 | S&F PVC fluted exterior & interior louvers of with and incl the cost of aluminium section 25mmx25mmx1.2mm, aluminium angle cleat 19mmx19mmx2mm & screw locking etc. The PVC fluted panels are interlockable. Louvers should be of size 2900mmx150mm x25mm with wall thickness of 4mm with exterior coating warranty of 10 years. The cost includes aluminium framework and all necessary fixtures & fittings etc complete all as specifed and as directed. |
| 43 | M&L for Providing and fixing Eco board decorative type false ceiling with tiles of size 600 x 600 x 4mm thick placed in existing false ceiling grid made of aluminium/GI/MS etc complete all as specified and as directed. |
| 44 | M&L for false ceiling with aluminum grid work Size of grid 605x605 mm, with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick etc complete all as specified and as directed. |
| 45 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified and as directed. |
| 46 | S&F PVC insulation panels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender