Tender For Repair / Maintenance Of Sofa Set, Auditorium Chairs And Canning Of Chair Steel Writing, Chair Dinning, Varandah, Easy Chairs At Bs Yard Of Age (I) Dhana At Dhana Mil Stn
Tender Value
8 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
20 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Sofa Set, Auditorium Chairs And Canning Of Chair Steel Writing, Chair Dinning, Varandah, Easy Chairs At Bs Yard Of Age (I) Dhana At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Sofa Set 5 Seater (3+1+1) (1.01 to 1.07) : FD-373, 281Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 2 | Side planks of sofa seat |
| 3 | Bottom planks of sofa set |
| 4 | Handle of sofa set |
| 5 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.250/Mtr |
| 6 | Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing. Tapestry cloth should not be less than Rs.250/Mtr |
| 7 | Material & labour for smoothening surface with sand paper of sofa set five seater for repolishing the old polishing surface with one coat of french polish complete all as specified and directed. |
| 8 | Sofa Set single seater enthic (2.01 to 2.06) |
| 9 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of U foam of 40 density 711 mm x635mm mm covered with best quality of tapestry cloth Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.450/Mtr |
| 10 | Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 11 | All as per Item No 2.02 above but back rail |
| 12 | All as per Item No 2.02 above but leg |
| 13 | All as per Item No 2.02 above but Handle of sofa set (single seater) |
| 14 | Polishing of Sofa Set signgle Seater with French polish wooden portion exposed to direct vision asfter repacement of above components. |
| 15 | Repair/Maint to Chairs Auditorium |
| 16 | Material & labour for Removing of old unsv/un tension MS spring ,02 Nos in each seat and S&F new MS Steel spring of seat fitted in iron bar of seat,as to smooth functioning as original to -fixing the same as original to chair chair with other allied works all as directed by Engg-In-Charge (Note:-Sample of chair can be seen in site before quating rates) |
| 17 | Material & labour for removing of old unserviceable upholstery of tapestry cloth of seat & back chair tip up moulded polythene foam 48 to 52 density and S&F new tapestry cloth of high quality to upholstery to chair tip up moulded polyethylene foam seat and back covering seat and back along with PVC beading as original show on drg or all as directed by Engg-In-Charge (Note:-Sample of chair can be seen in site before quoting rates) |
| 18 | Material & labour for removing of old unsv cup holder in each seat and S&F new PPCP armrest with cup Holder (Note:-Sample of chair can be seen in site before quoting rates) |
| 19 | CHAIR VERANDAH FD-19(M),256,359 |
| 20 | Removing of existing worn out U/S cane of chair verandah and recanning with new standard 4mm wide white/cream plasdtic/ Nylon cane of semi circular type in mat pattern all as specified and selected. |
| 21 | Painting of complete chair verandah with white synthetic enameled paint including preparation of surfaces, all as directed by Engr-in - Charge. |
| 22 | Removing of old UNSV PVC shoes, S&F of new PVC shoes best quality as per Drg. |
| 23 | CHAIR DINING FD-279,228, 203,1115 |
| 24 | Taking out u/s front leg and S&F new teak wood front leg as per drg. |
| 25 | Taking out old u/s rear leg and S&F new teak wood rear leg as per Drg. |
| 26 | Taking out UNSV front/ back seat rail and S&F new teak wood front seat rail as per Drg. |
| 27 | Taking out UNSV side rail ,S&F of new teakwood side seat rail as per Drg. |
| 28 | Taking out UNSV back strip, S&F of new back strip as per Drg. |
| 29 | Taking out UNSV stiffener ,S&Fof new teakwood stiffener as per Drg. |
| 30 | Taking out old UNSV PVC shoes and supply & fixing of new PVC shoes with steel screw superior quality as approved by Engr -in - Charge. |
| 31 | Recanning of Chair Dinning with plastic cane 2mm to 2.5 mm wide semi round of white colour, Border of seat shall be canned with 3mm wide plastic cane. Canning shall be done as per Godrej pattern including taking out U/s cane from chairs and removing from site,complete and all as directed and shown on drg. Make ; Shah/Premier or approved by Engr-in-Charge. |
| 32 | Polishing to chair dining with French polish wooden after replacement of above components. |
| 33 | CHAIR WRITING FD-202,280, 250 |
| 34 | Taking out u/s front leg and S&F new teakwood front leg as per Drg. |
| 35 | Taking out old u/s rear leg and S&F new teak wood rear leg as per Drg. |
| 36 | Taking out UNSV front/ back seat rail and S&F new teak wood front/back seat rail as per Drg. |
| 37 | Taking out UNSV side seat rail , S&F of new teak wood side seat rail as per Drg. |
| 38 | Taking out UNSV arms and S&Fof new teakwood arms as per Drg. |
| 39 | Taking out UNSV back strip,S&Fof new teakwood back strip as per Drg. |
| 40 | Taking out UNSV stiffener and S&Fof new teakwood stiffener as per Drg. |
| 41 | Taking out old UNSV PVC shoes and supply & fixing of new PVC shoes with steel screw superior quality as approved by Engr -in - Charge. |
| 42 | Recanning of Chair Writing with plastic cane 2mm to 2.5 mm wide semi round of white colour, Border of seat shall be canned with 3mm wide plastic cane. Canning shall be done as per Godrej pattern including taking out U/s cane from chairs and removing from site,complete and all as directed and shown on drg. Make ; Shah/Premier or approved by Engr-in-Charge. |
| 43 | Polishing of chair writing with French polish wooden portion exposed to direct vision asfter repacement of above components. |
| 44 | Material & labour for spot welding of steel items of broken joints etc not exceeding 2.5cm in length & thickness 6mm & incl scraping preparing surface of welded portion by grinding & applying two coat of synthetic enamel paint over a coat of red oxide on welded portion only. |
| 45 | Chair Wooden Bottom FD- 285, 55 & 225 |
| 46 | Taking out u/s front leg and S&F new teakwood front leg as per Drg. |
| 47 | Taking out u/s rear leg and S&F new teakwood rear leg as per Drg. |
| 48 | Taking out u/s front seat rail, S&F of new teakwood front seat rail as per Drg. |
| 49 | Taking out u/s back seat rail, S&F of new teakwood back seat rail as per Drg. |
| 50 | Taking out u/s side seat rail, S&F of new teakwood side seat rail as per Drg. |
| 51 | Taking out u/sback strip, S&F of new teakwood backstrip as per Drg. |
| 52 | Taking out u/s stiffener, S&F of new teakwood stiffener as per Drg. |
| 53 | Taking out u/s plywood sheet, S&F of new plywood sheet 6mm thick as per Drg. |
| 54 | Polishing of chair wooden bottom with French polish wooden portion exposed to direct vision after repacement of above components. |
| 55 | CHAIR EASY FD-229,201, 1108 |
| 56 | Taking out old u/s front leg of chair easy and S&F of new teak wood front leg as per Drg. |
| 57 | Taking out old u/s rear leg and S&F new teak wood rear leg as per Drg. |
| 58 | Taking out UNSV front seat rail , S&F of new teak wood front seat rail as per Drg. |
| 59 | Taking out UNSV back seat rail , S&F of new teak wood back seat rail as per Drg. |
| 60 | Taking out old u/s side seat rail , S&F new teak wood side seat rail as per Drg. |
| 61 | Taking out old u/s support back rail of seat frame, S&F new teak wood back rail of seat frame as per Drg. |
| 62 | Taking out u/s top bottom rail of back frame , S&F new teak wood top and bottom rail of back frame as per Drg. |
| 63 | Taking out UNSV arms of chair easy and S&F of new teakwood arms as per Drg. |
| 64 | Supply & fix new bracket with 08 Nos new steel screws of suitanle size bracket made out of 1st class hardwood (MP Teak) of size 75mm x 75mm x 25mm complete all as specified and approved by Engr-in-Charge. |
| 65 | Taking out old UNSV PVC shoes and supply & fixing of new PVC shoes with steel screw superior quality as approved by Engr -in - Charge. |
| 66 | Recanning of Chair Eazy with plastic cane 2mm to 2.5 mm wide semi round of white colour, Border of seat shall be canned with 3mm wide plastic cane. Canning shall be done as per Godrej pattern including taking out U/s cane from chairs and removing from site,complete and all as directed and shown on drg. Make ; Shah/Premier or approved by Engr-in-Charge. |
| 67 | Polishing of chair easy with French polish wooden portion exposed to direct vision asfter repacement of above components. |
| 68 | Chair Writing Steel FD - 360 |
| 69 | Taking out UNSV seat of chair,S&F of new seat with holes 1st class teakwood. Rest all as per drg. |
| 70 | Taking out UNSV back of chair,S&F of new seat with holes 1st class teakwood. Rest all as per drg. |
| 71 | Taking out UNSV Arms,S&F of new teak wood arms as per drg. |
| 72 | Taking out UNSV PVC shoes and S&F of new PVC shoes,superior quality. |
| 73 | Painting of chair writing steel after making smooth surface with synthetic enamel paint OG. |
| 74 | Taking out old UNSV cap ,S&F new PVC cap superior quality. |
| 75 | Removing of old u/s seats from chair Writing steel, Supply & Fix new seats of 1st class hard wood duly canned with cane plastic 2mm as per Godrej pattern. Wooden portion of seat shall be polished as per specified by Engr -in -Charge. |
| 76 | Removing of old u/s back from chair Writing steel, Supply & Fix new back of Ist class hard wood duly canned with cane plastic 2mm as per Godrej pattern. Wooden portion of seat shall be polished as per specified by Engr -in -Charge. |
| 77 | Removing of old unsv hand rest and Supply and Fixing of new Hand rest with 1st class hardwood duly polished as per specified by Engr-in-Charge. |
| 78 | Repair to CHARPOY GI PIPE PLYTOP :- FD-220(M) |
| 79 | Supply & fix mild steel square tube of size 20x20mm, 1.6mm thick 3 feet long 03 Nos, coated with red oxide primer and synthetic enamel paint, welded at equal distance with long rail parallel to short rail. |
| 80 | Supply & Fix 12mm thick BWR exterior Grade plywood of size 1980mm x 900mm x12 mm, screwed down to the GI pipe with appropritate machine screws all as spedified in Drg & as directed by AGE (I) |
| 81 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 4927.00/- ] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender