Tender For Repair / Replacement Of Lt Switch Gear, Lt Panels And Allied Works At Dhana Mil Stn
Tender Value
8 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
15 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Lt Switch Gear, Lt Panels And Allied Works At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in any type soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth (for cable, pole, stay etc) and getting out complete all as specified and directed. |
| 2 | Returning filling in including spreading, leveling, watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated material not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | Supply and laying Supplying and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm, laid as cable protection cover incl taking down old unsv bricks complete all as specified and directed. |
| 5 | Material & labour for providing dry river sand as in sand in trenches, ducts,transformer yard etc for cable cushioning all as specified and as directed. Note : Depth after punning shall be measured and paid. |
| 6 | Supply & laying, XLPE insulated PVC inner sheathed, 16 Sqmm, 4 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete including taking down old unserviceable cable complete all as specified and directed. |
| 7 | Supply & fixing, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed. |
| 8 | Material & labour for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for coping/plinth of poles, including necessary form work finished even & smooth without using extra cement all as specified and directed |
| 9 | Supply and Laying and spreading of 40mm graded stone aggregate for transformer yard/ HT 2 poe/4 pole stucture after preparing the sorounding by brick work and removing the vegetation and making brick work and necessary surface excevation and spreading of layer of sand all as specified and as directed. |
| 10 | Seviceing of drop out fuse by replacing the unserviceable male and female contacts, connectors, replacing unserviceable nuts, bolts, washers, greasing, align properly in situ all as directed.Note: spares will be measured and paid seperately |
| 11 | Supply & fixing top contact for DO fuse complete all as specified and directed. |
| 12 | Supply & fixing bottom contact for DO fuse complete all as specified and directed. |
| 13 | Supply & fixing Female contact/fix contact jaw for GOS complete all as specified and directed. |
| 14 | Supply & fixing of copper lugs 25 sqmm to 240 sqmm lugs complete all as specified and directed. |
| 15 | Supply and fix bus bar chamber weather proof boxes made out of 3mm thick CRCS sheet front opening double chamber type for providing four numbers aluminium bus bar strips of 400 Amps and 300 mm long each, insulators, nuts bolts and MCCB 250 amps 4 pole 35 KA incoming including terminating the existing incoming and outgoing cables etc alongwith painting with 2 coats of synthetic enamal paint over a coat of red oxide primer complete with proper fixing arrangements ofn ground with angle iron supports duly grouted on floor/ground all as specified and as directed. |
| 16 | Material & labour for one coat of synthetic enamel paint including preparation of surfaces on iron gate, rolling shutter,Chain link fencing etc complete all as specified and directed by Engr- in-charge |
| 17 | Supply and fix in replacement of Mild steel work in framed work such as gates,grills, framed guard bars, gratings, ladders, MS clamp for supporting of cable etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work complete all as specified and directed |
| 18 | Supply and fix in replacement of old unserviceable lugs after cutting the worn out /faulty cable end from LT pillar/panel box including necessary earth work for taking out the cable from loop line, returning, filling in and making cable lead by providing aluminium lugs including crimping with crimping tools in the existing LT cable 3.5 core upto 50 Sqmm including necessary connection complete all as specified and directed. |
| 19 | All as per item No 18 above but aluminium lugs of size 70 to 120 Sq mm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | All as per item No 18 above but aluminium lugs of size 70 to 120 Sq mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender