Tender For Repair / Replacement Of Steel Furniture At Furniture Yard Of Age (I) Dhana At Dhana Mil Stn
Tender Value
10 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
20 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Steel Furniture At Furniture Yard Of Age (I) Dhana At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | REPAIR TO CHARPOY GI PIPE WITH PLYTOP :- FD-220(M) |
| 2 | Removing of old UNSV Plytop from GI Charpoy and Supply & fixing of new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing incl Nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed. (Note:- Each corner of plywood should be round shaped). |
| 3 | Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore mediam grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. |
| 4 | Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 1.02 above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed. |
| 5 | Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 1.03 above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing. |
| 6 | Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed. |
| 7 | Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed. |
| 8 | Removing of old unsv Stiffner and Supply & fixing of new stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make : Prakash/Surya or any make approved by Engr-in-Charge. |
| 9 | Table Office officer Steel |
| 10 | Removing of old UNSV Top from Table office Officers, Supply and fixing of new top of pre-laminated particle board 18mm teak shed, one side balancing white laminated with PVC beading all round the top as per Drg. |
| 11 | Removing of old UNSV drawer of table office officers, supply and fixing of new drawer made out of 1mm thick 4mm teak wood Sheet as per Drg |
| 12 | Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel. |
| 13 | Taking out UNSV legs, top front rail, top side rail and stiffener, supply and fixing of new leg, top front rail, top side rail and stiffener made out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc. |
| 14 | Removing of UNSV rubber shoes of table office officers steel, supply & fixing of new rubber shoes as per Drg. |
| 15 | Removing of old unserviceable locks from the locking assy by loosening of screws, supply & fixing new locks of Godrej pattern with dupl keys. |
| 16 | Painting of Table office officer with two coat of synthetic enamel paint OG including preparation of surfaces. |
| 17 | Repair to Table Computer |
| 18 | Supply & fixing in replacement of old unserviceable table top & Bottom made out of 18 mm thick pre laminated particle board exterior grade conforming to grade -1 & type III(PL Particle-13 Designation)as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with 1mm thick PVC beading |
| 19 | Removing existing U/S telescopic channel ,Supply & fixing in replacement of old unserviceable computer table telescopic channel for Key board as per existing size 20/25 mm as shown on drawing and as directed. |
| 20 | Supply & fixing in replacement of old unserviceable table Side(left & Right) made out of 18 mm thick pre laminated particle board exterior grade conforming to grade -1 & type III(PL particle-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with1mm thick PVC beading |
| 21 | Table Office Clerk Steel |
| 22 | Removing of UNSV Top from Table office Clk steel, Supply and fixing of new top of pre-laminated particle board 18mm exterior grade teak shed, one side balancing white laminated with 4mm teak wood beading all round the top as per Drg. |
| 23 | Removing of UNSV drawer of table office Clk steel, supply and fixing of new drawer made out of 1mm thick PBI Sheet as per Drg |
| 24 | Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel. |
| 25 | Taking out UNSV legs, top front rail, top side rail and stiffener, supply and fixing of new leg, top front rail, top side rail and stiffener made out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc. |
| 26 | Removing of UNSV rubber shoes of stable office Clk steel, supply & fixing of new rubber shoes as per Drg. |
| 27 | Removing of old unserviceable locks from the locking assy by loosening of screws, supply & fixing new locks of Godrej pattern with dupl keys. |
| 28 | Painting of Table office Clk steel with two coat of synthetic enamel paint OG including denting/painting and preparation of surfaces |
| 29 | Repair to Steel Almirah Large/ Med/Lockers FD- 67, FD -12031, FD- 243, FD-1032 |
| 30 | Removing of old unserviceable locks from the locking assy of almirah large / med / locker bed side by loosening of screws, supply & fixing new locks of Godrej pattern with dupl keys. |
| 31 | Removing of unserviceable handles from almirah large / med / locker bed side and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by Engr - in Charge. |
| 32 | Removing of unserviceable MS cleats from the almirah large /med/bed side lockers and Supply and fixing of new MS Cleats of best quality to be fixed in the vertical channel below of each shelves to maintain equal distance between shelves. |
| 33 | Replacement of old unserviceable shelves and Supply and fixing new shelves made out of PBI sheet 01mm thick. |
| 34 | Removing of unserviceable leg from bottom portion of almirah and supply & fixing of new leg made out of PBI Sheet 1mm thick as per Drg. |
| 35 | Removing of unserviceable hinges from shutter and supply and fixing of new hinge as per drawing. |
| 36 | Removing of old unserviceable locking device supply and fixing of new locking device 3 way as per drawing. |
| 37 | Removing of UNSV drawer of locker bed side steel and Supply and fitting new drawer made of PBI sheet 01mm thick as per drg |
| 38 | Removing of old UNSV cover of lock & supply & fixing new cover made out of PBI sheet 1mm thick as per existing size & Drg. |
| 39 | Removing of unserviceable hanging rod supply & fixing new hanging rod 20mm dia with clamp chromium plated as per Drg & directed by E-in-charge. |
| 40 | Painting of locker bedside steel after making of smooth surface with one coat of synthetic enamel paint OG. |
| 41 | Painting of Almirah Medium/ Large steel after making of smooth surface with one coat of synthetic enamel paint OG. |
| 42 | Repair to Welding of Steel Furniture FD – 67, 1031, 1032, 84M , 1003, 1004, 75M, 258, 77M &78M |
| 43 | M&L for spot welding of steel items of broken joints etc not exceeding 2.5cm in length & thickness 6mm & incl scraping preparing surface of welded portion by grinding & applying two coat of synthetic enamel paint over a coat of red oxide on welded portion only. |
| 44 | Repair to Welding of Steel Furniture FD – 67, 1031, 1032, 84M , 1003, 1004, 75M, 258, 77M &78M |
| 45 | Removing of old u/s seats from chair CB steel with arms& w/o arm, Supply & Fix new seats of 1st class hard wood duly canned with cane plastic 2mm as per Godrej pattern.Wooden portion of seat shall be painted with two coat of synthetic enamel paint black. |
| 46 | Removing of old u/s back from chair CB steel with arms& w/o arm,S&F new back of Ist class hard wood duly canned with cane plastic 2mm as per Godrej pattern.Wooden portion of back shall be painted with two coat of synthetic enamel paint black. |
| 47 | Removing of old u/s handles from chair CB steel with arms, Supply & Fix new handles of 1st class hard wood. Handles shall be painted with two coat of synthetic enamel paint black. |
| 48 | Removing of old UNSV PVC shoes, supply & fixing of new PVC shoes best quality as per Drg. |
| 49 | Painting of frame of chair CB steel with arms with two coats of synthetic enamel paint OG including welding and preparation of surfaces. |
| 50 | CHAIR VERANDAH OFFICER, FD /MAP-II/06 |
| 51 | Removing of old u/s seats from Chair Varandah officer, Supply & Fix new PVC Seat 4 mm thick with Weight not less than 1.85 Kgs and Grooves 90 x 10 mm 10 Nos on seat also PVC edges folded towards back all as specified and directed by Engr in Charge. |
| 52 | Removing of old u/s back from Chair Varandah officer, Supply & Fix new PVC Seat 4 mm thick with Weight not less than 1.85 Kgs and Grooves 90 x 10 mm 10 Nos on Back all as specified and directed by Engr in Charge. |
| 53 | Removing of old UNSV PVC shoes, S&F of new PVC shoes best quality as per Drg. |
| 54 | Removing of old u/s 19mm dia MS Tube Stiffner from Chair Varandah officer and supply and fixing of new Stiffner os same size and all as specified and directed by Engr -in - Charge. |
| 55 | Welding to broken joints of chair verandah, complete all as directed by Engr-in - Charge. |
| 56 | Painting of frame of chair CB steel with arms with two coats of synthetic enamel paint OG including welding and preparation of surfaces. |
| 57 | Table Steel 900 x 600 mm with Drawer / Without Drawer Steel |
| 58 | Taking out Unserveceable table top from Table Steel 900 x 600 mm with / without drawer and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III (PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 59 | Taking out Unserveceable/ damaged legs from Table Steel 900 x 600 mm with / without drawer and Supply & Fixed new leg made of MS Pipe of existing sizes complete as specified & directed by Engineer-in-Charge. |
| 60 | Taking out Unserveceable/ damaged front or back rails from Table Steel 900 x 600 mm with / without drawer and Supply & Fixed new rails made of MS Square pipe of existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 61 | Taking out damaged centre stiffener from Table Steel 900 x 600 mm with / without drawer and Supply & Fixed new centre stiffeners made of MS square pipe of existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 62 | Taking out unserveceable/ damaged drawers from Table Steel 900 x 600 mm with drawer and Supply & Fixed new drawers made with MS Square pipe of existing size complete as shown on drg & directed by Engineer-in-Charge. |
| 63 | Taking out unsv Rubber shoes and supply and fixing of new Rubber Shoes for Table all as specified and directed by Engr -in - Charge. |
| 64 | Painting of the Table Steel 900 x 600 mm with / without drawer including preparation of old surface complete all as specified & directed by Engineer-in-Charge. |
| 65 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 12332/- ] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender