Tender For Repair/Maintenance Of Flooring, Plastering, Joinery And Allied Civil Works In Officers Md Accommodation Under Age B/R-Ii At Itarana Military Station, Alwar.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
19 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Flooring, Plastering, Joinery And Allied Civil Works In Officers Md Accommodation Under Age B/R-Ii At Itarana Military Station, Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully existing chowkats/door frames complete with shutters, without removing shutters from frames, for openings not exceeding 1.50 sqm, including dismantling, removal of fixing materials, nails, holdfasts etc., and making good the disturbed surfaces complete all as specified and directed. |
| 2 | Taking down carefully existing chowkats/door frames complete with shutters, without removing shutters from frames, for openings exceeding 1.50 sqm but not exceeding 4.00 sqm each, including dismantling, removal of fixing materials, nails, holdfasts etc., and making good the disturbed surfaces complete all as specified and directed. |
| 3 | Taking down carefully existing door/window shutters of any description, for areas exceeding 1.00 sqm but not exceeding 2.00 sqm each, including removal of hinges, fittings and fixing materials, making good the disturbed surfaces and all complete as specified and directed. |
| 4 | S&F factory-made 35 mm thick plain framed and panelled door shutter of 2nd class hardwood, comprising stiles, rails and two panels, faced with commercial plywood veneers/decorative face veneers, kiln seasoned and chemically treated, properly assembled and finished, including necessary cutting, fitting and fixing in position complete all as specified and directed. |
| 5 | S&F factory-made 30 mm thick flush door shutter of solid core construction with block board core and commercial plywood face panels on both faces, factory pressed and finished, including necessary edge treatment, cutting, fitting and fixing in position complete all as specified and directed. |
| 6 | M&L for factory-made 2nd class hardwood glazed/skeleton door shutter comprising stiles and rails of 30 mm thick 2nd class hardwood, kiln seasoned and chemically pressure treated, open rebated and prepared to receive glass/wire gauze etc., without sash bars, with framing edges plain, chamfered or rounded, fitted with mitred beads for securing glass/wire gauze etc., complete in all respects. Size of shutter members shall conform to IS 1003. Including accurate fitting to existing/new chowkhat with necessary cutting, fitting and fixing complete all as specified and directed. |
| 7 | S&F factory-made single/double extruded WPC (Wood Polymer Composite) solid door/window/clerestory window and other frames/chowkhats of size 65 x 125 mm, comprising virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives having maximum toxicity index of 12 for 100 gms, fabricated with mitred joints using PVC solvent cement and fixed with full-body threaded star-headed SS screws, having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category, termite/borer proof, water/moisture proof and fire retardant, including fixing in position with MS holdfast/lugs/SS dash fasteners of required diameter and length complete as specified and directed. MS holdfast/lugs or SS dash fasteners shall be measured and paid for separately. For WPC solid door/window frames, minus 5 mm tolerance in profile depth and width shall be acceptable. Variation in profile dimensions on plus side shall be acceptable without any extra payment on this account. |
| 8 | Providing and fixing factory-made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter, 30 mm thick, comprising virgin polymer of K value 58-60 (suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives having maximum toxicity index of 12 for 100 gms, minimum density of 650 kg/cum, screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category, termite/borer proof, water/moisture proof and fire retardant, laminated on both faces with PVC foil of minimum 14 microns thickness of approved design, pasted with hot-melt adhesive, including fixing with stainless steel butt hinges of required size and full-body threaded star-headed countersunk SS screws complete all as specified and directed. Stainless steel butt hinges and necessary SS screws shall be measured and paid for separately. |
| 9 | S&F factory-made solid PVC moulded door shutters, 28 to 30 mm thick at stiles, having 2, 4 or 6 raised panel design, with 2 mm thick moulded PVC sheet on front face and 2 mm plain colour PVC sheet on back face, including necessary edge treatment, cutting to required size, fitting and fixing in existing/new frames complete as per specification, drawing and all as specified and directed. |
| 10 | S&F solid PVC door frame of size 50 x 47 mm, manufactured from 5 mm thick wood-grain finish PVC sheet reinforced internally with MS square tube, including cutting, mitred/corner joints, necessary reinforcement, fixing in position with suitable fasteners and making good adjoining surfaces complete as per specification, drawing and all as specified and directed. |
| 11 | S&F in repair factory-made steel ventilator, box type, with side-hung shutter, including hinges, steel peg stay, handle and glazing bars, dovetailed or welded, including fixing of lugs in PCC 1:2:4 Type B1 using 20 mm graded stone aggregate, cutting and making good walls and ceiling to match existing finish, including necessary hinges, handles and fixing accessories complete all as specified and directed. |
| 12 | S&F galvanised mild steel wire cloth of 0.46 mm nominal diameter of wire and average aperture width of 1.56 mm, accurately cut to required size and fixed to wooden/steel frames with tinned tacks or galvanised wire staples, including necessary cutting, lapping, fixing and finishing complete all as specified and directed. |
| 13 | S&F 3 mm thick ordinary quality sheet glass, cut to required size and glazed with oil putty in square panes, each pane not exceeding 0.50 sqm, including necessary bedding, fixing, finishing and making good complete all as specified and directed. |
| 14 | S&F 3mm thick sheet glass ordinary quality fixed with oil putty to metal frame including hacking out old broken glass (in any description) from metal frame complete all as specified and directed |
| 15 | S&F frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks, cooler stand & SImilar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 16 | S&F Stainless Steel, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified. |
| 17 | S&F Stainless Steel barel tower bolt 300mm long all as specified and directed. |
| 18 | S&F in repair Stainless Steel handle of 150m size oval type stove enamelled black all as specified. |
| 19 | S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed. |
| 20 | S&F Stainless Steel sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed |
| 21 | S&F in replacment 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed |
| 22 | S&F in repair Stainless steel barel tower bolt 300mm long as specified and directed. |
| 23 | S&F in replair Stainless steel barel tower bolt of 150m size all as specified and directed. |
| 24 | S&F in repair stainless steel sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified. |
| 25 | S & F in repairs 125 mm long mild steel, steel window handle incl nuts & bolts ( all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge. |
| 26 | S & F in repairs 300 mm long aluminium, for aluminium window peg stay incl nuts & bolts (all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge. |
| 27 | S & F in repairs 300 mm long mild steel, steel window peg stay incl nuts & bolts (all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of pink primer complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description exceeding 10 cm in width or girth, including cleaning, rubbing down, removal of rust and foreign matter, stopping where necessary and applying two coats of synthetic enamel paint over one coat of approved red oxide primer, complete all as specified and directed. |
| 30 | S&F powder coated aluminium door, anodised in approved colour, comprising frame of size 63.5 x 38.10 mm x 2 mm thick and shutter comprising door vertical stile with gasket of size 46.3 x 45.00 mm x 1.50 mm thick, top rail of size 47.00 x 45.00 mm x 1.30 mm thick, lock/middle rail of size 83.00 x 44.50 mm x 1.65 mm thick and bottom rail of size 114.3 x 45.00 mm x 1.50 mm thick, including S&F 4.8 mm thick sheet glass with glazing clips, PVC track gasket and EPDM rubber gasket for weather tightening, recessed type handle, hinges, mortice lock and door closer, including cutting, fabrication, assembling, glazing, fixing and finishing complete as specified in TD-2004/61R Sheet No. 1/1 and all as specified and directed. |
| 31 | S&F powder coated aluminium window, three-track section, outer frame section 92 x 31.75 mm and shutter section 40 x 18 mm, shutters mounted on bearings for smooth sliding on tracks, plain anodised/approved colour finish, including S&F 5 mm thick frosted/plain glass and galvanised wire mesh with glazing clips, PVC track gasket and EPDM rubber gasket for weather-tight glazing, recessed type handles and locks, sealing of gaps at marble/granite surfaces with approved silicone sealant to make the installation watertight, including aluminium grill and all necessary fittings, fixtures and accessories complete all as specified and directed. |
| 32 | S&F aluminium windows manufactured from 1.59 mm thick aluminium sections, powder coated with coating thickness not less than 50 microns, double shutter type suitable for glass/wire gauge, including necessary accessories such as jointing cleats, glazing clips, rubber/neoprene packing for fixing glass/wire gauge, aluminium handles, 2 Nos. 100 mm long 'D' type tower bolts per shutter, 2 Nos. 100 mm aluminium hinges and necessary steel screws, complete all as specified and directed. Aluminium sections shall be: outer frame 125 x 25 x 1.50 mm thick; shutter frame 44 x 25 x 1.59 mm thick for glass and 44 x 25 x 1.59 mm thick for wire gauge. Rates shall include all fittings and fixtures. Glass and wire gauge shall be measured and paid for separately under respective items. |
| 33 | Taking down existing aluminium doors carefully and refixing in the same opening after easing, adjusting and resecuring rubber beads/gaskets/beading, including necessary adjustment and repair to door closer, floor spring and other fittings, alignment, operation and making good complete all as specified and directed. |
| 34 | S&F in repair stainless steel curtain rod of 20 mm internal dia, length as required, including suitable brackets/supports, PVC rawl plugs and steel screws, securely fixed to walls/beams complete all as specified and directed. |
| 35 | S&F in repair mild steel/stainless steel brackets suitable for 20 mm dia curtain rods, including PVC rawl plugs and screws for fixing to walls, complete all as specified and directed. |
| 36 | S&F in repair rubber door seal, 32 mm wide, with 19 mm wide aluminium strip, securely fixed with machine steel screws and washers, including cutting to length, drilling and fixing complete all as specified and directed. |
| 37 | S&F in repair plain fillets of 2nd class hardwood, clean sawn, square/rectangular/triangular/bull-nosed or rounded on one edge, cross-sectional area not exceeding 3 sq cm, including cutting, fitting and fixing complete all as specified and directed. |
| 38 | S&F in repair galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average aperture width of 1.18 mm, cut to required size and fixed to wooden/steel frames with tinned tacks or galvanised wire staples, including wooden beading and necessary cutting, fitting and fixing complete all as specified and directed. |
| 39 | S&F in repair mortice lock of brass body, 4-lever vertical type, 100 mm size, including necessary striking plate, screws and fixing accessories, complete all as specified and directed. |
| 40 | S&F in repair mortice lock of mild steel body, 4-lever vertical type, 75 mm size, including necessary striking plate, screws and fixing accessories, complete all as specified and directed. |
| 41 | S&F in repair mortice lock of mild steel body, 4-lever vertical type, 25 mm size, including necessary striking plate, screws and fixing accessories, complete all as specified and directed. |
| 42 | M&L for pressed steel door shutter of 1 mm thick sheet, including pressed steel frame of 1.25 mm thick sheet, 12 mm dia MS locking rod, two Nos. chromium plated handles and one mortice pattern lock, including two coats spray applied paint over one coat shop primer, complete as shown on Drg No. TD/2004/29 Sheet No. 1/3 to 3/3 and all as specified and directed. |
| 43 | S&F in repair aluminium extruded body hydraulic door closer, hydraulically regulated, Designation No. 2, universal type, suitable for door shutters 701 to 850 mm wide and weighing 36 to 60 kg, including necessary fixing screws and accessories, complete all as specified and directed. |
| 44 | S&F in repair double action floor spring, hydraulically regulated, comprising minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, brass governing pivot and heavy-duty mild steel internal components, including taking down door shutter, repair/adjustment of floor spring and refixing door shutter, complete all as specified and directed. |
| 45 | S&F in repair 18-19 mm thick exterior grade pre-laminated particle board, pre-laminated on both faces with decorative laminate, cut to required size and fixed to timber framework with necessary screws, hinges and other fittings for cupboard shutters, bookshelf, showcase etc., including aluminium/teak wood beading/edging/lipping of 19 mm wide x 6 mm thick fixed with nails, complete all as specified and directed. |
| 46 | S&F factory-made kitchen cabinet of size 1.50 m x 0.60 m x 0.30 m, fabricated from 18 mm thick PVC Celuka sheet having density not less than 650 kg/cum, with decorative pre-lamination on one face and balancing laminate on the other face, including carcase, shutters of 18 mm thick PVC board, shelf, necessary brackets, screws, adhesives and fittings. Panels shall be fabricated by joining with suitable adhesive and screws as required, with all exposed edges finished with 2 mm thick edge-banding tape or 90 degree edge-bent finish as per approved make, drawing and specification. PVC Celuka sheet shall be manufactured by ISO 9001:2015 certified manufacturer and shall be termite proof, waterproof and flame retardant. Cabinet shall comprise four 18 mm thick PVC Celuka panels joined with solvent cement adhesive and screws, with 18 mm thick PVC sheet backing, and divided into two equal compartments with two-leaf shutters and one shelf. Cabinet shall be securely fixed to wall with 4 Nos. suitable fasteners and necessary fixing lugs. Each shutter shall be provided with 75 mm SS handle, CP piano hinges and magnetic catch/catcher. Rate shall include all fittings, fixtures and accessories complete all as specified and directed. |
| 47 | S&F stainless steel kitchen accessories/basket system including cutlery tray, plate rack, utensil tray etc. for modular kitchen of any size and shape, complete with SS 304 grade sliding channels, SS screws and all necessary accessories, including drilling, PVC caps, self-threading screws and fixing in position complete all as specified and directed. |
| 48 | S&F in repair factory-made PVC kitchen cabinet fabricated from 18 mm thick PVC Celuka/Celuka ply having density not less than 650 kg/cum, pre-laminated on one face, cut to required size for shutters and cabinet panels, including shelf and full-size shutters fitted above kitchen cooking platform and/or other platform, complete with nickel-plated clip hinges, knobs, channels and all necessary fittings and fixtures, including dismantling existing boarding of any description and refixing/fixing in position complete all as specified and directed. Rate shall include cupboard knobs, stainless steel channels and CP plate clip hinges conforming to manufacturer's specification and approved drawing, complete all as specified and directed. |
| 49 | M&L for machine-cut Kota stone slab, 25 mm thick, for shelves and similar works, in single piece not exceeding 1.50 m in length, top and bottom surfaces polished, front edge half moulded, fixed and jointed with grey cement set and pointed in cement mortar 1:4, including rubbing and mirror polishing to top surface only, bottom surface machine finished, cutting chases as required and making good the wall surface with cement mortar 1:4 for insertion of stone slab shelves in stone/brick walls, complete all as specified and directed. |
| 50 | S&F 5.5 mm thick ordinary quality sheet glass, cut to required size and glazed with suitable beading and rubber gasket in square panes exceeding 0.50 sqm each, including cutting, fitting, glazing and finishing complete all as specified and directed. |
| 51 | Taking down cement plaster from brick walls, including raking out joints, hacking surface to provide adequate key, scrubbing and cleaning down with water and making good disturbed surfaces, complete all as specified and directed. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 53 | M&L for glazed coloured ceramic tiles, 300 x 600 x 7 mm thick, laid over and including 10 mm thick rendering in cement mortar 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white/coloured cement to match tile shade, including cutting, fitting and finishing complete all as specified and directed. |
| 54 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick, square/rectangular, area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, for floors and similar surfaces, laid over and including 10 mm thick rendering/bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white/coloured cement to match tile shade, including cutting, laying and finishing complete all as specified and directed. |
| 55 | M&L for 18-20 mm thick granite of approved type, table rubbed and polished, for steps, jambs, pillars, window cills, cooking platforms and similar works, laid in cement mortar 1:4, including pointing with white cement mortar 1:2 using marble dust and pigment to match granite shade, laid over 15 mm thick screed/bedding layer in cement mortar 1:3, including grinding and polishing of exposed edges to curved surface finish, cutting, fitting and finishing complete all as specified and directed. |
| 56 | M&L for vitrified double-charged ceramic tiles, 600 x 600 mm/600 x 1200 mm, 8-10 mm thick, square/rectangular, polished and coloured, for floors and similar surfaces, laid over and including 15 mm thick screed/bedding layer in cement and sand mortar 1:6, set and jointed in neat cement slurry and pointed with white/coloured cement to match tile shade, including cutting, laying and finishing complete all as specified and directed. |
| 57 | M&L for 12 mm thick vitrified exterior grade heavy-duty textured finish tiles, approved make, suitable for parking/porch areas, size 300 x 300 mm/400 x 400 mm, laid on floors over and including 20 mm thick cement mortar screed bed in CM 1:4, set and jointed in neat cement slurry and pointed with white/coloured cement mixed with approved pigment to match tile shade, including cutting, laying, jointing, pointing and finishing complete all as specified and directed. |
| 58 | M&L for rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces and on surfaces other than fair faces of brick masonry, finished even and smooth without use of extra cement, including preparation of surface, curing and finishing complete all as specified and directed. |
| 59 | M&L for preparation of newly plastered surfaces, including necessary rubbing down, filling minor imperfections and application of two coats of oil bound distemper of approved shade/tint, including necessary preparation between coats and finishing complete all as specified and directed. |
| 60 | M&L for preparation of old painted surfaces of wood or wood-based materials of any description exceeding 10 cm in girth or width, including cleaning, scraping, rubbing down and preparation of surface and applying one coat of first quality synthetic enamel paint of approved shade, complete all as specified and directed. |
| 61 | Taking out existing roof treatment of any description, including plaster, cement concrete etc., carefully removing existing treatment and cleaning/rubbing the surface with water, including providing and applying 20 mm thick cement plaster in CM 1:3 to roof slab mixed with WPC @ 3% by weight of cement, finished fair, even and smooth, complete all as specified and directed. WPC shall be measured and paid for separately. |
| 62 | M&L for priming prepared roof surface with one coat of cold-applied bituminous primer @ 0.40 litre/sqm conforming to IS 3384, followed by application of APP-based polymeric waterproofing membrane, minimum 3 mm thick and weighing 3 kg/sqm, reinforced with polyester non-woven fabric weighing not less than 150 g/sqm, torch applied with side laps of 75 mm and end laps of 100 mm, including sealing of all joints and treatment of junctions. Membrane shall be carried up to a minimum height of 600 mm and inserted into groove formed in parapet wall wherever required and turned down on facia as applicable, including all necessary preparation and incidental works complete. APP membrane shall be Tikidan/IWL or equivalent approved make. Including application of two coats of heat-resistant reflective paint (Excel Cool Coat or equivalent approved make) over APP membrane, complete all as specified and directed. |
| 63 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate, 50 mm thick, laid over roof slab as levelling course to provide and maintain required slope for proper drainage of rainwater, including preparation of surface, laying, compacting, finishing and curing, complete all as specified and directed. |
| 64 | Disconnecting and dewatering PVC overhead water storage tank, scrubbing and cleaning internal surfaces, removing scales, dirt and deposits from tank and mouths of circulating pipes, washing with fresh water and disinfecting by flushing with liquid chlorine or approved equivalent chemical, reconnecting and refixing in position after cleaning, for tank capacities 500/1000 litres, including marking with white paint and stencil as required, complete all as specified and directed. Note: Cleaning shall be carried out through washout pipe by making suitable arrangement at outlet pipe, including cutting, providing short length of pipe, fittings, union/coupling etc. wherever washout pipe is not existing. Dirt/debris shall not be permitted to enter the water supply system. Rate shall include all materials, fittings and incidental works necessary for completion of the item. |
| 65 | S&F in repair 20 mm bore high pressure ball brass valve with polythene float and nut, conforming to IS, screwed for iron pipe/brass ferrule and fixed complete all as specified and directed. |
| 66 | S&F in repair 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F in reapir medium grade steel tubing with all necessary fittings, bends, sockets, unions and fixing accessories, fixed to walls/floors/ceilings complete all as specified and directed: (a) 15 mm dia. |
| 68 | (b) 20 mm dia. |
| 69 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without use of extra cement, including preparation, curing and finishing complete all as specified and directed. |
| 70 | M&L for preparation of newly plastered ceiling/soffit surfaces and applying three coats of white wash, including necessary surface preparation and finishing between coats, complete all as specified and directed. |
| 71 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate as coping, including forming weathering slope, slightly rounded/chamfered angles, throating and finishing complete all as specified and directed. |
| 72 | M&L for covered fillet in PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate, 75 mm radius, at junction of roof slab and parapet wall, including finishing and application of bitumen Grade 30/40 conforming to IS 73 @ 1.20 kg/sqm over one coat of bituminous primer, complete all as specified and directed. |
| 73 | M&L for PCC 1:3:6 Type C-1 using 20 mm graded stone aggregate as base for water tanks, including laying, compacting and finishing even and smooth, complete all as specified and directed. |
| 74 | S&F in repair rotationally moulded polyethylene water storage tank, cylindrical vertical type with closed top, 500 litres capacity, including hoisting, positioning, levelling, connection and fixing complete as specified in SSR Part-I and all as specified and directed. |
| 75 | S&F in repair rotationally moulded polyethylene water storage tank, cylindrical vertical type with closed top, 1000 litres capacity, including hoisting, positioning, levelling, connection and fixing complete as specified in SSR Part-I and all as specified and directed. |
| 76 | Demolition of cement concrete in ground floor and paving, not exceeding 150 mm thickness, whether below or above ground level, including breaking, dismantling and removal complete all as specified and directed. |
| 77 | M&L for cutting holes in stone walls, not exceeding half-brick depth/thickness, in cement mortar for insertion of holdfasts, including making good the disturbed portion in cement mortar 1:3 or PCC 1:2:4 Type B-1 as required, complete all as specified and directed. |
| 78 | S&F pre-painted galvalume aluminium-zinc coated steel corrugated sheet, 0.50 mm thick, of approved colour and tensile strength 550 MPa, for roof covering/wall cladding, fixed with self-tapping screws with suitable washers and accessories, including cutting, laps and fixing complete all as specified and directed. |
| 79 | M&L for preparation of new/old untreated steel surfaces of any description exceeding 10 cm in width or girth, including cleaning, removal of rust and loose material, rubbing down and application of two coats of synthetic enamel paint over one coat of approved primer, complete all as specified and directed. |
| 80 | M&L for structural steel work in tubular sections of any description, including cutting, fabrication, welding, erection and fixing with special shaped washers and necessary accessories, using ERW or induction butt-welded steel tubes conforming to IS 1161:1979 Grade St-240, complete all as specified and directed. |
| 81 | Taking down/dismantling loose or damaged concrete including plaster of any description and in any position from RCC structures such as chajjas, fins, roof ceilings, louvers, parapets, columns, beams and lintels, by careful hammering with wooden mallets and chipping off defective concrete, including necessary scaffolding, cutting of rusted reinforcement where required and removal of debris to a distance not exceeding 500 m, complete all as specified and directed. |
| 82 | Cleaning existing exposed concrete surfaces and reinforcement after removal of defective concrete, including wire brushing, scraping, cleaning with emery paper and washing down with water as required, followed by application of solvent-free epoxy concrete bonding agent to old concrete surfaces in accordance with manufacturer's instructions for bonding with new concrete, complete all as specified and directed. Make: NITOBOND EP of FOSROC/CARBODUR of SIKA//Dr FIXIT or equivalent approved make. |
| 83 | M&L for applying two coats of epoxy zinc-rich primer as protective coating to exposed old and new reinforcement exceeding 10 mm dia, in accordance with manufacturer's instructions, complete all as specified and directed. Make: NITOZINC PRIMER of FOSROC/FRIAZINC R of SIKA/Dr FIXIT or equivalent approved make. |
| 84 | M&L for rendering 15 mm thick on any face of brickwork or concrete surfaces in cement mortar 1:6 mixed with Dr Fixit Pidicrete URP @ 15% by weight of cement, finished even and smooth without use of extra cement, including preparation and application of one coat of cement slurry mixed with Dr Fixit Pidicrete URP in 1:1 ratio as bonding coat between plaster and old brick/concrete surface, complete all as specified and directed. |
| 85 | S&F gauzed shutter comprising stainless steel framed work for door shutter, fabricated from hollow/square/rectangular/circular sections and other required sections, suitable for hinged or sliding operation, including hooks, fittings, mortice lock, hanging arrangements, necessary framing and fixing arrangements for wire mesh, bolting, welding and all necessary hardware and accessories complete. Wire mesh shall be measured and paid for separately. |
| 86 | S&F in repair stainless steel sink with drainage board for kitchen/laboratory, fabricated from 1 mm thick stainless steel sheet, including plug, washer, waste, waste pipe, cantilever brackets and union connection to pipe, overall size not less than 915 x 460 mm with bowl size 410 x 330 x 160 mm, complete all as specified and directed. Make: NIRALI/PRAYAG/BLUE STAR/SILVER SHINE or equivalent approved make. |
| 87 | S&F in repair 15 mm dia bib tap, cast copper alloy, chromium plated, fancy type, with crutch/butterfly handle, screwed down, suitable for iron pipe/brass ferrule, including necessary fixing accessories complete all as specified and directed. Make: JAQUAR Cat Part No. OPP-CHR-15037PM/CERA Cat Part No. F-1017152/PARRYWARE Cat Part No. T-5006A1 or equivalent approved make. |
| 88 | S&F in repair 15 mm bore stop valve/angle cock, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch/butterfly handle, screwed both ends for iron pipe/unions, including necessary fixing accessories complete all as specified and directed. Make: JAQUAR Cat Part No. OPP-15053PM/CERA Cat Part No. F-10152201CH/PARRYWARE Cat Part No. T-7207A1 or equivalent approved make. |
| 89 | S&F in repair stainless steel plate rack fabricated from 1.00 mm thick stainless steel sheet, size 900 x 750 mm, with shelves of 230 mm depth and partitions for small/large plates, fabricated from 24 gauge stainless steel, conforming to approved sample, including hanging/fixing to wall with steel screws, PVC rawl plugs and necessary fixing accessories complete all as specified and directed. |
| 90 | Supply and fixing in repair PVC water tank cover of required size and suitable for existing water tank of any capacity, including necessary fittings, fixing accessories and making good complete all as specified and directed. |
| 91 | M&L for vibratory moulded coloured precast concrete interlocking paver blocks, any approved shape and size, conforming to IS 15658:2006, 60 mm thick, M-35 grade, laid over and including 25 mm thick sand cushion, properly compacted and jointed, with joints filled with dry sand after laying, including cutting, edge fitting and finishing complete all as specified and directed. |
| 92 | M&L for coloured chequered cement concrete tiles, 300 x 300 x 25 mm thick, laid on floors over and including 20 mm thick cement mortar screed bed in CM 1:4, set and jointed in neat cement slurry and pointed with white cement and approved pigment, including cutting, laying, jointing and finishing complete all as specified and directed. |
| 93 | S&F selfy shower panel, 1600 x 200 mm, stainless steel body with anti-fingerprint finish, including all necessary fittings, fixtures and accessories, installed in accordance with manufacturer's instructions, complete all as specified and directed. Make: JAQUAR /PERRYWARE/CERA |
| 94 | M&L for solid PVC wall lining comprising 5 mm thick plain-colour PVC sheet, including solvent cement and fixing to 35 mm wide x 5 mm thick PVC sheet fillet frame, with PVC U-channels at top and bottom and PVC angles at all corners, including all necessary cutting, jointing and finishing. Alternatively, where specified, 5 mm thick wood-grain printed PVC sheet shall be fixed over PVC frame using solvent cement, complete as per approved specification and drawing and all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender