Tender For Day To Day Repairs To Plumbing, Sanitary Fittings, Aluminium Joinery And Connected Items Of Nofra, Ncs, maintenance of Goa, Noi, Lach Rajhans And Swimming Pool Area Under Ge Gomantak
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
20 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Repairs To Plumbing, Sanitary Fittings, Aluminium Joinery And Connected Items Of Nofra, Ncs, maintenance of Goa, Noi, Lach Rajhans And Swimming Pool Area Under Ge Gomantak
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brick Work/ stone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 2 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 3 | Taking down cement or cement lime plaster on walls/ concrete/roof slab any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 4 | Providing and applying 10 mm thick ready mix cement plaster on fair faces of brick wall or concrete surface including finishing the surface fair and even complete all as specified and directed. |
| 5 | Providing and applying 5 mm thick ready mix cement plaster on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | Providing and applying 15 mm thick ready mix external sand faced cement plaster with neat cement rendering at all locations on masonry (except stone masonry) and concrete surfaces with and including water proofing compound complete all as specified & directed. |
| 7 | M&L for applying one coat of alkali resistant primer on plastered surfaces of ceiling over 1.5 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 8 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly plastered surface of wall including preparation of surface complete all as specified. |
| 9 | M&L for applying one coat of alkali resistant primer on plastered surfaces of wall over 1.5 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 10 | M&L for preparation of old surface of wall etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix putty wherever required and applying one coat of oil bound distemper complete all as manufacturers instruction and as directed |
| 11 | M&L for preparation of old surface of ceiling etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix putty wherever required and applying one coat of oil bound distemper complete all as manufacturers instruction and as directed |
| 12 | M&L for preparation of old surface of wall/ceiling etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix exterior wall putty wherever required and applying one coat of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives complete all as specified and directed. |
| 13 | M&L for preparation of old painted surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 14 | M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 16 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 17 | M&L for joint free glazed ceramic coloured tiles or ceramic designer tiles of size 450 x 350 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed. |
| 18 | M&L for light shade vitrified ceramic tiles 9-10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 19 | M&L for light shade vitrified ceramic tiles 9-10 mm thick(square/rectangular) polished, to match floor tiles fixed on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 20 | Dismantling of stone slabs and tiles of any description and thickness as in floor, apron etc. laid dry or laid dry and pointed complete all as specified and directed. |
| 21 | M&L for machine cut cudappah stone slab 20 to 25 mm thick fixed in position laid, jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab, grinding and polishing with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 22 | M&L for granite stone 18 to 20 mm thick (of any type) glazed (table rubbed and polished) fixed as in steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded laid over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 23 | M&L for machine cut kota stone of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps (in single piece), skirting, dado etc., 18 to 20 mm thick, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and mirror polishing laid over and including screed bed 15 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed. |
| 24 | M&L For Exterior/ parking floor tiles heavy duty for light traffic, non skid, anti scratch, heavy grip vitreous/ semi vitreous coloured, unique design tiles of size 400 x 400 x 8 to 10 mm thick each as in floor, steps, risers, landing, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.Make:- Duracrete, Durato, RAK, Bell, H&R Johnson |
| 25 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and directed. |
| 26 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 Cm thickness (below or above ground level) complete all as specified and directed. |
| 27 | M&L for 75mm thick cement concrete type C-1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction and necessary formwork complete all as specified and directed. |
| 28 | Cutting down the plants/ trees of girth n.exc. 15 cm from roof tops/ sides of external walls of building, chajja, wall junctions & at junctions of rain water/ waste water pipes including taking out the roots entered into wall/ slab surfaces, making good surfaces with PCC 1:2:4 type B-0 (using 12.5 mm thick stone aggregate) or cement mortar (1:2) including repairing the GI/ CI/ PVC pipe joints which were affected due to cutting/ taking out process after applying suitable herbicide including making good the disturbed surfaces to match the adjoining surfaces complete with necessary scaffolding/ staging/ Jhula etc, with all necessary safety precautions complete all as directed and as specified. |
| 29 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed. |
| 30 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed. |
| 31 | Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed |
| 32 | M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:6 complete all as specified and directed. |
| 33 | S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed . |
| 34 | S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type with one or more rebates including joining cleat for fixing complete with necessary fittings complete all as specified and directed. |
| 35 | S&F Deco-102 (10 mm thick), Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed. |
| 36 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed. |
| 37 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed. |
| 38 | M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 39 | S&F 2nd class hard wood, plain framed, panelled shutters (any number of panels), 35 mm thick with panels of timber flat on both sides (feather edged), or of veneered particle Board medium density, wood particle board with commercial face veneers; fitted to chowkhats complete all as specified and directed. |
| 40 | M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 41 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on one face and other face covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 42 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. |
| 43 | S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 44 | S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed. |
| 45 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 46 | M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 47 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hold fast etc. including necessary form work complete all as specified and directed. |
| 48 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. Please Enable Macros to View BoQ information |
| 49 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender