Tender For Conversion Of Hand Pump To Mini Power Pump And Providing Water Supply Arrangements And Valves At Ward No. 22, Chavadi Lane (Krishnan Koil Street) In Periyakulam Municipality
Tender Value
1.70 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
1700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Theni → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Hand Pump To Mini Power Pump And Providing Water Supply Arrangements And Valves At Ward No. 22, Chavadi Lane (Krishnan Koil Street) In Periyakulam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 3 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 4 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 5 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 6 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 4 3/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 7 | Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed |
| 8 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 9 | Supply and fixing of followings Water Supply special arrangements including the cost all materials etc.,complete, in all clamps and fixtures in works wherever necessary as directed by departmental officer etc., |
| 10 | 1HP jet Pumpset |
| 11 | 1 HP Panel board with starter |
| 12 | 1000 liter HDPE Tank |
| 13 | 2.5 Sqmm submersible flat copper cable |
| 14 | 40mm dia HDPE Hose Pipe |
| 15 | 32mm dia GI pipe |
| 16 | 32mm dia GI Coupling |
| 17 | 32mm dia GI Elbow |
| 18 | 32mm dia GI Bend |
| 19 | 32mm GM NRV |
| 20 | 32mm GI Hex Nipple |
| 21 | 32mm GI Union |
| 22 | 32 X 25 mm GI Reducer |
| 23 | 32 X 25 mm GI Reducer Elbow |
| 24 | 25mm GI Union |
| 25 | 25mm GI Hex Nipple |
| 26 | 25mm GI Elbow |
| 27 | 25mm GI coupling |
| 28 | 25mm GI Bend |
| 29 | 25mm GI pipe |
| 30 | Bore cover |
| 31 | Pipe kitty |
| 32 | 25mm dia GI Tee |
| 33 | 25mm ball valve |
| 34 | 25 X 20 mm GI Reducer |
| 35 | 20 mm Tap |
| 36 | 25mm dia PVC Bend |
| 37 | 25mm dia CPVC Tank nipple |
| 38 | 25mm PVC MTA |
| 39 | 25mm PVC pipe |
| 40 | 25mm PVC elbow |
| 41 | 25mm PVC coupler |
| 42 | 32mm PVC coupler |
| 43 | 32mm PVC pipe |
| 44 | 32mm PVC elbow |
| 45 | 32mm CPVC tank nipple |
| 46 | 32mm PVC MTA |
| 47 | 32mm PVC Bend |
| 48 | 25 X 20mm GI Reducer elbow |
| 49 | 32 Amps Fuse unit |
| 50 | Wooden meter board (0.60 x 0.60m) |
| 51 | 40 amps ELCB unit |
| 52 | 90mm PVC pipe |
| 53 | 90mm PVC Coupling |
| 54 | 90mm PVC Tee |
| 55 | 90mm PVC Elbow |
| 56 | 50m GI pipe |
| 57 | 50mm GI bend |
| 58 | 50mm GI coupling |
| 59 | 50mm GI Elbow |
| 60 | 50mm GI Union |
| 61 | 50mm GI Tee |
| 62 | 50mm GI Flange |
| 63 | 50mm x 40mm dia GI Reducer |
| 64 | 150mm MS saddle piece |
| 65 | 100mm MS saddle piece |
| 66 | 150mm dia CID joint set |
| 67 | 5/8\\" X 5\\" bolt nut washer |
| 68 | Shellac |
| 69 | Solvent |
| 70 | Rectification of followig CI sluice valves with making new check nut and spindle rod re threading including all cost and conveyance and labour charges |
| 71 | 100mm CI sluice Valve |
| 72 | Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Openwell including fixing of suction pipe and foot valve uptoa maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto theexterior wall of pump room and erection of panel boardconsisting of TPIC switches starter, Voltmeter, Ammeter,Capacitor single phasing preventor and laying and jointing the cables and twinearthing as per IE rules including providing bed blocks etc., complete anoperatingthe pumps and trial run for 10 days including signing ofcompletion of reports as required by EB authorities. |
| 73 | Supply and run of 2 of 4sq.mm.(56/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20GI bearer wire for service connection mains SD 65 |
| 74 | Supply and run of 2of4sq.mm.(56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GIpipe(Class'B') suitably bent at both ends with necessary angle iron up right and end supports formains SD 70 |
| 75 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of 1 No 8640.00 MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 76 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 77 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 78 | Provision for GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender