Tender For Internal Repairs / Renovation Of Various Quarters Of U Block By Way Of Facelifting / Panelling / Tiling / Sanitary Work And Other Allied Works At Budshah Flats Srinagar.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
9 days left
EMD
50000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Repairs / Renovation Of Various Quarters Of U Block By Way Of Facelifting / Panelling / Tiling / Sanitary Work And Other Allied Works At Budshah Flats Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Providing and laying stone soling (hand packed) in trenches incl ramming,dressing watering etc incl all leads and lifts all complete incld carriage. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 6 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.In cement mortar. |
| 7 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for |
| 12 | Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Columns, pillars, piers, abutments, posts and struts |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level. |
| 16 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles (Digital Series) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 20 | Providing and fixing Ist quality ceramic glazed floor tiles (Digital Series and Anti skid) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- inCharge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete. |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 22 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-20 pipe , 25mm OD(SDR-7.4) including all fittings, elbows, Tee, Male & Female Adopter. |
| 23 | PPR Union 20mm |
| 24 | Providing and fixing of PVC Type B pipes of standard make as per the directions of Engineer Incharge at site complete. |
| 25 | 100mm Dia |
| 26 | 75mm Dia |
| 27 | 40mm Dia |
| 28 | Providing and fixing of PVC fittings of standard make as per the directions of Engineer Incharge at site complete. |
| 29 | Plain bend 100mm |
| 30 | Plain bend 75mm |
| 31 | Door bend 100mm |
| 32 | Collar 100mm |
| 33 | Door Tee 75mm |
| 34 | Door Tee 100mm |
| 35 | Reducer 100mm to 75mm |
| 36 | PVC Floor Trap 75mm |
| 37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Flexible pipe 32 mm dia |
| 38 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore |
| 39 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 40 | Providing and fixing C.P Sanitary fittings of approve make (Jaquar/Cera/Parko or Equivalent) as approved by Engineer Incharge at site complete. |
| 41 | Brass Bib Cock (15mm nominal bore) |
| 42 | Basin Mixer (Double Nobe) |
| 43 | Wall mixer |
| 44 | Sink Mixer (Double nobe) |
| 45 | Brass Angle valve |
| 46 | Soap Case |
| 47 | PTMT Grating (Circular type 100mm nominal dia) |
| 48 | Towel Rail Single 600mm Long |
| 49 | Towel Ring 20mm Dia |
| 50 | Renewing glass panes with new wooden fillets float glass panes of thickness 3.5mm (weight not less than 10 Kg/Sqm) including scaffolding, ladders including cleaning of glass panes wherever required complete job. |
| 51 | Painting with synthetic enamel paint of approved brand (Asian Paints) and make one or more coats on old work to give an even shade incld scrapping and sand papering, brushes and preparing the surface even smooth incld necessary repairs to scratches, applying putty over and in joints also incld scaffolding, ladders incld cleaning of glass panes, tiles, marble wherever required complete job. |
| 52 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 53 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 54 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work. |
| 55 | Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of ground work of 12mm to 10mm (as per requirement) thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 56 | Providing and fixing of 6mm thick ply board in wardrobes, ceiling incld scaffolding, nails, all fixing material as directed by Engineer incharge complete job incld applying primer to new wooden surface and two coats of synthetic enamel as desired colour as directed by Engineer Incharge. |
| 57 | Providing and fixing of dulmica / sunmica over old almirah or like of approved quality, design and colour incld all brass hardware fittings, glazing and drawer, telescopic channels etc wherever required and locking arrangements (As per the directions of EIC) all inclusive complete job (Face area of the cabinets will be measured for payment) incld all carriages. |
| 58 | Providing and fixing 19mm thick ply board in level and plum of approved brand wherever required as directed by EIC incld cost of hinges, wooden beading and other hardware fittings. |
| 59 | Providing, fabrication and fixing of kitchen cabinets with telescopic drawers with sliding arrangement of approved quality with 19mm plyboard in side shelves, with at least two or more shelves in each individual cabnits and wherever required including 6mm ply board and back plywood shutters 19mm thick laminated sunmica sheeting or teak wood mirror polished including glazing of approved quality and colour exposed face of approved design and drawing, including painting two or more coats of synthetic enamel paint of approved quality and colour inside, including cost of all brass fastnenings and fittings, telescopic drawer channels as per requirements and lock of Godrej / Link only 15mm dia including all other necessaary accessories complete in all respects as directed by Engineer Incharge at site complete. |
| 60 | 600mm deep |
| 61 | 450mm deep |
| 62 | 600mm deep |
| 63 | Engagement of carpenters along with equipments for doing necessary work like easing of doors and windows and like all complete as per the directions Engineer Incharge at site all complete. (to be paid as per progress subject to the maximum of 20 No's) |
| 64 | Engagement of carpenters along with equipments for doing necessary work like easing of doors and windows and like all complete as per the directions Engineer Incharge at site all complete. (to be paid as per progress subject to the maximum of 20 No's) |
| 65 | Engagment of TATA MOBILE for disposal of dismantled material out of the MuncipleLimts along with loading and un loading of material . |
| 66 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 67 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-495601 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender