Tender For Upgradation Of Vip-5 By Way Of Upgradation Of Kitchen, Upvc Windows, Master Bedroom Panelling Flooring, Bathroom, False Ceiling, Upgradation Of Lawns Etc. Cno-116 P
Tender Value
33.60 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
67200
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Vip-5 By Way Of Upgradation Of Kitchen, Upvc Windows, Master Bedroom Panelling Flooring, Bathroom, False Ceiling, Upgradation Of Lawns Etc. Cno-116 P
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm. Kahtamband |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet. |
| 3 | Engaging welder with welding set and helper. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
| 5 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in charge: In cement mortar. |
| 6 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 7 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 8 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Edges of slabs. Under 20 cm wide. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 14 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 15 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 16 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 17 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete. |
| 18 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry andmaking pattern of 300x300mm/sq 3mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge. 23.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm |
| 19 | Cement plaster of mix: 1:6. |
| 20 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand). |
| 21 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm. |
| 22 | Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328 (type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures. |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood. |
| 24 | Providing and fixing of water proof flush door 34mm thick with 1.00 mm thick laminate (green, century or equivalent)/veener on both sides including lipping, painting/polishing, hinges, tower bolts, door stopper, mortize lock (harrison, godrej or equivalent). Complete. |
| 25 | French spirit polishing, Two or more coats on new works including a coat of wood filler. |
| 26 | Providing and fixing 12 mm thick toughened fluted glass panes in wooden frames including sealent /glazing compound to secure the glass in place, carriages, taxes. Complete job. |
| 27 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multipoint locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, including drilling of holes for fixing hardware's and Drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment onthis account shall be made. UPVC Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm). |
| 28 | UPVC Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). |
| 29 | Providing and Fixing factory made UPVC door frame, made of UPVC extruded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 4'x2'. Kajaria, Somany or equivalent. |
| 31 | P/F 8mm thick laminated HDF flooring of Action TESA brand (AC3) including carriage, cutting, foam layer, wastage etc complete job. Including skirting and top lipping on skirting. |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 34 | Wall panelling with backing of 4 mm ACP sheet including all fixtures and levelling of joints for an even surface. Complete job. |
| 35 | Providing and fixing 8 mm HDHMR board on walls including all necessary screws and fixtures, wastage , carriage, taxes. Complete job. |
| 36 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality. 1 mm thick. |
| 37 | Fabricating and fixing of almirahs, frames made of 18mm plyboard/19mm century or green plywood with front edge bending tape including HDHMR/19mm century or green plywood shelfs with both side laminaions and front edge bending tape, shutters made of 18mm one side prelaminated century or green plywood and designer laminate 0.8mm on exterior side with edge bending tape on four sides, backing made of 4mm ACP sheet (white matt) of standard make, complete sliding mechnasim/ flush hinges as per requirement, including stainless steel handles of standard make including lock, tower bolts, magnetic catcher incl hanging rods with brackets, telescopic channels for drawers and flush handles. |
| 38 | Providing and fixing modular kitchen wall hung cabinets comprising of box made with 18 mm HDHMR board with type A bond (phenolformaldehyde resin) and surface of plywood having both side laminates with front side edge bending tape,backing made of 4 mm ACP sheet of Alstrong make, SS 90° hinges with 0° crank / Gas spring shockers of standard make like KAFF, HAFELE or equivalent, 18 mm HDHMR board shutters with high gloss/matt laminates with four side edge bending tape, superior quality handles, including wall hanging brackets and shelves and shelf support as per requirement. Cabinet depth 310 mm includes L shaped CR unit. Complete job as per directions of Engineer in charge. |
| 39 | Providing and fixing base cabinets for modular kitchen comprising of Box made with 18 mm BWP 710 grade with type A bond (phenol-formaldehyde resin) and surface of plywood having both side laminates with front side edge bending tape, backing made of 4 mm ACP sheet of Alstrong make, SS 90° hinges with 0° crank like KAFF, HAFELE or equivalent, shutters with high gloss laminates with four side edge bending tape, superior quality G/J profile handles, accessories include Matrixbox / Tandem drawer box, PVC cuttlery tray, Dish rack complete. 100 mm adjustable PVC Legs and 100 mm PVC skirting with brackets and skirting corner including cabinet connector for cabinet fixing. Cabinet depth 560 mm.includes L shape CR unit. Complete job as per directions of Engineer in charge. |
| 40 | Providing and fixing 18mm thick Quartz slab over 20mm thick mix mortar/chemical 1:3 mix including carriage, wastage, cutting, fixing complete of superior quality. |
| 41 | Providing double moulding of same Quartz including grinding , finishing complete. |
| 42 | Providing and fixing of Double Chamber sink of superior quality. |
| 43 | Providing and fixing sink mixer Jaguar Ruhe Kara Dual flow. |
| 44 | Providing and fixing Angle valve Jaguar 15mm heavy duty (FUS-CHR -29053 30 |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15 mm. |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20 mm. |
| 47 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.75 mm diametre. |
| 48 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.75 mm diametre. |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 50 | P/F concealed body, single lever high flow divertor (Jaquar) including making all connections and making good the walls. |
| 51 | P/F wall mounted hot and cold basin mixer with single lever(Jaquar). |
| 52 | P/F 3 way concealed divertor shower system set with single lever mixer bath spout with attached telephonic shower resting on wall mounted stand and over head shower(square 1'x1')(Jaquar). |
| 53 | Providing and fixing floor mounted or wall mounted with conealed tank, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Jaquar) |
| 54 | P/F Vanity with counter top basin with waste coupling and waste pipe,CP mixer of standard make(Jaquar or equivalent, basin mounted) including drawers for storage, backlit looking glass of size 2'x1.5'. Complete job. |
| 55 | P/F 5 mm bevelled edge looking glass fixed to wall with spacers and SS flat head screws. Complete job. 4x8'-0\\"x3'-0\\"= 96.00 sft |
| 56 | P/F CP brass single lever health faucet with flexible SS cased pipe and wall mounting arrangement. |
| 57 | P/F CP brass long body mm nominal bore of Jaguar or equivalent make |
| 58 | P/F 5mm thick glass shelf with guard rail, 600mm length.(Jaquar). |
| 59 | P/F SS 600mm long towel rack with sliding hooks. (Jaquar) |
| 60 | P/F frosted glass soap dish with wall mounted SS frame of superior make. (Jaquar) |
| 61 | P/F forsted glass tumbler with wall mounted SS frame of superioe make. (Jaquar) |
| 62 | P/F pump action frosted glass soap dispensor with wall mounted SS frame of superior make. (Jaquar) |
| 63 | P/F SS towel ring with wall flange of superior make, (Jaquar) |
| 64 | P/F SS 304 Gratings for floor drainage with cockroach trap. (5\\"x5\\") |
| 65 | Providing and fixing superior Wallpaper of approved design and texture on wall surface including adhesives, wastages, taxes etc. Complete job. |
| 66 | Providing and fixing 17 mm WPC louvers of superior make on levelled wall surface including all necessary screws, fixtres, metal clips, angle corner and adhesives of required shade and color as approved by Engg. In charge. |
| 67 | Providing and fixing PVC MOULDING of different sizes 12mm to 65mm width (8 feet length) fixed with adhesive of approved quality and screws/nails on walls as per directions of the engineer-in-charge .65mm. |
| 68 | Providing and fixing PVC MOULDING of different sizes 12mm to 65mm width (8 feet length) fixed with adhesive of approved quality and screws/nails on walls as per directions of the engineer-in-charge.40mm. |
| 69 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 70 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick. |
| 71 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats. |
| 72 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two Coats. |
| 73 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal Wood. |
| 74 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 30 mm. |
| 75 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood. |
| 76 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 77 | P/F 10mm thick toughened glass partition in shower area including all necessary brackets, hinged, Handles on both faces, glass film etc complete job. |
| 78 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd teak wood. 50x20mm. |
| 79 | Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete. |
| 80 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 81 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement. Medium shade using 50% white cement and 50% ordinary cement. |
| 82 | P/F Aluminum frame work with all necessary fixtures and making good the surface with 18 guage thick aluminum and powder coated surface of ivory shade including hinges, window /door shutters with panel inserts of 4 mm Glass/ACP sheet and epdm rubber strips at junctions including handles, locls, tower bolts etc. Complete jpb as per direction of Engg. I/C. |
| 83 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded. |
| 84 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 85 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth . |
| 86 | By engaging Labour for miscc. Works st site inclusing removal of hanging vegetation on walls. |
| 87 | Trolly trips for mulba disposal. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender