Tender For Bore Well Works At Thanjavur
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Bore Well Works At Thanjavur
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of Borewells of size 6'' to 8'' dia in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including supplying and packing of pebbles and conveyance of hand boreset including loading and unloading etc., completed and as directed by the departmental officers. For the depth from 0 t 40m |
| 2 | Supplying suitable PVC casing pipe for 6\\" dia borewell best approved quality with ISI mark with necessary PVC coupling etc., (The PVC pipe should be got approved by departmental officer before execution) |
| 3 | Supplying and fixing of suitable PVC end cap (6kg/cm2) for 6\\" dia bore well of best quality with ISI mark (The PVC end cap should be got approved by departmental officer before execution). |
| 4 | Supplying of best approved quality of PVC Pipe used for commercial applications operate and higher water pressure (Schedule-80) for 32mm dia 10Kg/cm2 as one piece without join with homogeneous section through out the length and with marking every 5m, for erection in the borewell etc., completed as directed by the federation officers |
| 5 | Supplying, laying and jointing HDPE pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives etc for below ground level -a) 32mm dia HDPE Pipe |
| 6 | Supplying of 3.0HP submersible motor cum Pump set of any ISI certified company and sump motor 1.0 HP Monoblock Pump including all accessories etc.,completed- 3.0HP submersible motor cum Pump set |
| 7 | Sump motor 1.0 HP Monoblock Pump |
| 8 | Supply of Panel box of size 2'9'' x 2'9'' made with MS plats of 16gauge sheets with 15mm plywood board on the inner back and with openable shutter on the front for fixing EB electric water hour meter, main board and for fixing the pannel board suitable strong painted with enamel painint powder coated as directed by the departmental officers. |
| 9 | Supply of 3Phase Panel board including labour chargers, containing starter for 3HP for submergible motor,amp,meter,volt meter.one number MCB, indictor and ets., fitted on powder coated MS Sheet of 18gauge with full wiring as directed by the departmental officers. |
| 10 | Supply & run off 2 of 4 Sq.mm under ground cable suitable for inserting inside water storage of bore well with perfect water seal and high resistant to heat with copper conductor insulation of 4 Sq.mm cross section for 440 volt and 15 Ams current capacity as directed by the departmental officers. |
| 11 | Supply of Nylon rope for bore -well of 14mm dia strong and not decayable for the errection of holding the total weight of the submergible motor as directed by the departmental officers. |
| 12 | Labour charges for erecting the submersible motor with UG flat cable, nylon rope and 32mm HDPE house tubes attached with pump in the vertical bore, fixing the hoses firmly in the bore by attaching to the clamps and connecting the hoses to the PVC lines with hose coller and etc.,as directed by the departmental officers. |
| 13 | Supplying and fixing of 40mm dia cast iron Non-Return valve conforming to IS & swing type with natural rubber flap, flanges set etc., as directed by the departmental officers. |
| 14 | Supply and fixing of TNEB meter board suitable for 63A three phase service connection with 63A fuse unit (500V) 63A neutral link and earth link (1'' x 1/8'' Copper flat) on TW plank of size 375mmx300mmx19mm with supporting T.W reepers of 1'' thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall earth connection and inter connection with 7/20 PVC insulated copper wire from EB neter to fuse unit (SD 127) |
| 15 | Supplying a the following dia G.I Specials confirming to IS 1239 a) 40mm GI Coupling |
| 16 | b) 40mm GI bend |
| 17 | c) 40mm GI clamp set |
| 18 | Supply and run off SWG copper wire on walls or below ground level with necessary U nails earthwork excavation and refilling cost of all materials etc complete in all respects-1M |
| 19 | Earthing as per the ISI specification with an earth electrode of 2.1mt Class'B' Cllass GI Pipe of dia less than 40mm with copper arth flat of size 125mmc50ccx6mm with necessary funneling arrangements using charcoal, common salt,GI reducer,check nuts etc., with necessary masonary work and with 38mm thick RCC Cover slab for the brick masonary inculding cost of moulding steel,fabrication etc., complete respects. |
| 20 | Supplying and fixing of 63Amp DPIC switch of 500V with Face & Neutrual (side handle) on suitable T.W board of size 30cmx20cm x7.5cm including necessary internal connection & earth connection etc., complete. |
| 21 | Construction of Borewell chamber of clear size 0.60 m x 0.60 m x 0.60 m including refilling testing etc., completed |
| 22 | Providing internal 3 Phase Electrical Wiring including all From EB Pole to BMC Building with all Fittings ( wire, switches...etc)As per Tender specification. |
| 23 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender